Sharp AR-162, AR-163 operation manual Follow the cautions below when using this copier

Page 2

CAUTIONS

Follow the cautions below when using this copier.

●The fusing area is hot. Exercise care in this area when removing misfed paper.

● Do not look directly at the light source. Doing so may damage your eyes.

●Place the copier on a firm, level surface.

●Do not install the copier in a humid or dusty location.

●When the copier is not used for a long time, for example, during prolonged holidays, turn the power switch off and remove the power cord from the outlet.

● When moving the copier, be sure to turn the power switch off and remove the power cord from the outlet.

●Do not cover the copier with a dust cover, cloth or plastic film while the power is on. Doing so may prevent heat dissipation, damaging the copier.

●Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser radiation exposure.

Cautions on laser

Wave length	785 nm ±10 nm

Pulse times	(8.141 µs ±0.1 µs)/7 mm

Output power	0.2 mW ±0.02 mW

Image 2

Contents AR-163 Follow the cautions below when using this copier Contents AB series metric and inch series references IntroductionConventions used in this manual Main Features Part Names and Functions Part Names and Functions Paper Size indicators Interrupt key and indicator pZoom indicator p.17 Alarm indicatorsOriginal Size Enter key and indicators p Start key and indicatorPreset Ratio selector keys and indicators p Auto Paper Select indicatorCopier Installation Do not install your copier in areas that areDo not touch the photoconductive drum green portion Push the paper tray firmly back into the copier Loading Copy PaperGently lift and pull out the paper tray until it stops Loading Copy Paper Key Press the Start key and then the Paper Size Enter keyAuditing Accounts Enter your account number using the numeric keysWhen copying is completed, press the Audit Clear Key Normal Copying Turn the power switch onAdjust the copy density Normal Copying How to remove the platen coverSet the number of copies using the numeric keys Press the Start keyPress the Auto Image Key REDUCTION/ENLARGEMENT/ZOOMAutomatic Enter the number of copies Press the Start keySet the number of copies and press the Start key REDUCTION/ENLARGEMENT/ZOOMManual Bypass Feed special paper Unfold the bypass trayBypass Feed special paper TWO-SIDED Copying Press the copy ratio display key XY ZoomPress the XY-ZOOM key Enter the desired number of copies Press the Start key Use the Preset Ratio selector , keys and zoomXY Zoom Reverse Press the B/W Reverse key Check the copy paper sizeSet the number of copies Press the Start key Dual page CopyPress the Dual page Copy key Press the Interrupt key When all Interrupt copies are finished, pressInterrupting a Copy RUN Automatic Exposure Adjustment Toner Save Mode To enter the toner save mode, press the light keyFive times Toner cartridge out. Remove the toner cartridge whileRemove the new toner cartridge from the bag. Hold Push the toner cartridge lock release lever and pullPress the light key Toner Cartridge ReplacementToner cartridge life Misfeed in the copier Misfeed RemovalMisfeed in the bypass tray First confirm the misfeed locationMisfeed Removal Turn the roller rotating knob in the direction Arrow Misfeed in the paper tray Close the side cover by pressing the handle on CoverMaintenance Required Developer RequiredProgram No Program name Description User ProgramsList of user programs User Programs Setting the user programsEnter a program number using the numeric keys Program name Program NoSelect the desired parameter using the numeric keys OFFEnter a 3-digit account number using the numeric keys Settings for auditing accountsSelect the desired setting using the numeric keys Program No Account number change Use the copy ratio display key to select the account Number Press and hold down the 0 keyProgram No Resetting account Auto power shut-off mode Power Save ModesPreheat mode Copying from the preheat mode Power Save ModesSetting the power save modes Copying from the auto power shut-off modeBypass tray paper feed roller User MaintenanceOriginal table and platen cover Charger cleaner out by holding the tab User MaintenanceTransfer charger cleaning Problem Solution Copier TROUBLE?Copier TROUBLE? COPY/FAX keySelf-diagnostic function ExampleSupplies Types and sizes of copy paperProper storage SuppliesGenuine supplies statement Store the supplies in a location that isSpecifications Specifications Optional Equipment System Configuration Part Names SpecificationsSingle Pass Feeder AR-SP2 Using the SPF Single Pass Feeder AR-SP2Misfeed removal Electronic Sorting KIT AR-EB3 Rotation copyingElectronic Sorting KIT AR-EB3 Sort modeGroup mode Sort/groupCopying in the sort mode Set the originals face up in the document feeder tray1 or 4 Selection Enter the desired pattern number using a numeric keyPress the 2 in 1 / 4 Key to completePress the Erase / key to select the desired Erase mode EraseElectronic Sorting KIT AR-EB3 Margin shift Press the Margin Shift key Check the copy paper sizeSheet Paper Feed Unit AR-DE5 Loading copy paperConfirm that the misfeed indicator has gone out AR-DE5 Index Index Material Safety Data Sheet Flash Point Method Used Ignition TemperatureSpecial Fire Fighting Procedure Flammable LimitsMedical Conditions Generally Aggravated by Exposure Ingredients CAS No ProportionOther Limits None required under normal use Memo Class Laser Product Laser Klasse Page Sharp Corporation