Sharp AR-163, AR-162 operation manual Select the desired parameter using the numeric keys, Off

Page 39

USER PROGRAMS

4	Select the desired parameter using the numeric keys.
	● The entered parameter number will blink on the right side of the copy

quantity display.

● The parameters are shown in the table below.

For example, to change the setting of the auto power shut-off timer to 60 min., press key 2.

Program name	Parameters
Auto clear time	0	OFF	1	30 sec.	* 2	60 sec.	3	90 sec.	4	120 sec.
	5	10 sec.

Preheat mode**	0	OFF ** 1		30 sec.	2	60 sec.	* 3	90 sec.	4	120 sec.
Auto power shut-off timer	* 1	30 min.	2	60 min.	3	90 min.	4	120 min.	5	240 min.

Stream feeding mode	* 0	OFF	1	ON

Auto power shut-off setting	0	OFF	* 1	ON

Border line for 2 in 1 or 4 in 1	* 0	OFF	1	ON

Rotation copy	0	OFF	* 1	ON
Auto paper select mode	0	OFF	* 1	ON

Auto tray switching	0	OFF	* 1	ON

Erase width adjustment	0	0 mm	1	5 mm	* 2	10 mm	3	15 mm	4	20 mm
	(0	0"	1	1/4"	* 2	1/2"	3	3/4"	4	1")

Layout in 2 in 1 copy	* 1	Pattern 1	2	Pattern 2

Layout in 4 in 1 copy	* 1	Pattern 1	2	Pattern 2	3	Pattern 3	4	Pattern 4

Offset of paper output tray	0	Upper OFF, lower OFF			* 1	Upper ON, lower ON
	2	Upper ON, lower OFF			3	Upper OFF, lower ON

●Factory default settings are indicated with an asterisk (*). For layout in 2 in 1 copy and 4 in 1 copy, see page 61.

**In European countries, the default setting of the preheat mode is 1 ( 30 sec.). For other programs, factory default settings in these countries are same to those shown above with an asterisk (*).

If you select “0” (OFF) in a program, the corresponding function will be disabled.

5	Press the START ( ) key.
	● The right-hand number in the copy quantity display will be steadily lit

and the entered value will be stored.

GENERAL INFORMATION User programs

To continue with other user programs, press the key

6 and then repeat steps 2 to 5. To exit the user program mode, press the light () key.

●All the alarm indicators will go out.

37

Image 39

Contents AR-163 Follow the cautions below when using this copier Contents Introduction Conventions used in this manualAB series metric and inch series references Main Features Part Names and Functions Part Names and Functions Alarm indicators Interrupt key and indicator pZoom indicator p.17 Paper Size indicatorsAuto Paper Select indicator Start key and indicatorPreset Ratio selector keys and indicators p Original Size Enter key and indicators pDo not install your copier in areas that are Copier InstallationDo not touch the photoconductive drum green portion Loading Copy Paper Gently lift and pull out the paper tray until it stopsPush the paper tray firmly back into the copier Loading Copy Paper Press the Start key and then the Paper Size Enter key KeyEnter your account number using the numeric keys When copying is completed, press the Audit Clear KeyAuditing Accounts Turn the power switch on Adjust the copy densityNormal Copying Press the Start key How to remove the platen coverSet the number of copies using the numeric keys Normal CopyingEnter the number of copies Press the Start key REDUCTION/ENLARGEMENT/ZOOMAutomatic Press the Auto Image KeyREDUCTION/ENLARGEMENT/ZOOM ManualSet the number of copies and press the Start key Unfold the bypass tray Bypass Feed special paperBypass Feed special paper TWO-SIDED Copying XY Zoom Press the XY-ZOOM keyPress the copy ratio display key Use the Preset Ratio selector , keys and zoom XY ZoomEnter the desired number of copies Press the Start key Press the B/W Reverse key Check the copy paper size ReverseDual page Copy Press the Dual page Copy keySet the number of copies Press the Start key When all Interrupt copies are finished, press Interrupting a Copy RUNPress the Interrupt key Automatic Exposure Adjustment To enter the toner save mode, press the light key Toner Save ModePush the toner cartridge lock release lever and pull Toner cartridge out. Remove the toner cartridge whileRemove the new toner cartridge from the bag. Hold Five timesToner Cartridge Replacement Toner cartridge lifePress the light key First confirm the misfeed location Misfeed RemovalMisfeed in the bypass tray Misfeed in the copierMisfeed Removal Turn the roller rotating knob in the direction Arrow Close the side cover by pressing the handle on Cover Misfeed in the paper trayDeveloper Required Maintenance RequiredUser Programs List of user programsProgram No Program name Description Program name Program No Setting the user programsEnter a program number using the numeric keys User ProgramsOFF Select the desired parameter using the numeric keysSettings for auditing accounts Select the desired setting using the numeric keysEnter a 3-digit account number using the numeric keys Program No Account number change Press and hold down the 0 key Use the copy ratio display key to select the account NumberProgram No Resetting account Power Save Modes Preheat modeAuto power shut-off mode Copying from the auto power shut-off mode Power Save ModesSetting the power save modes Copying from the preheat modeUser Maintenance Original table and platen coverBypass tray paper feed roller User Maintenance Transfer charger cleaningCharger cleaner out by holding the tab Copier TROUBLE? Problem SolutionCOPY/FAX key Copier TROUBLE?Example Self-diagnostic functionTypes and sizes of copy paper SuppliesStore the supplies in a location that is SuppliesGenuine supplies statement Proper storageSpecifications Specifications Optional Equipment System Configuration Specifications Single Pass Feeder AR-SP2Part Names Single Pass Feeder AR-SP2 Using the SPFMisfeed removal Rotation copying Electronic Sorting KIT AR-EB3Sort/group Sort modeGroup mode Electronic Sorting KIT AR-EB3Set the originals face up in the document feeder tray Copying in the sort mode1 or 4 Key to complete Enter the desired pattern number using a numeric keyPress the 2 in 1 / 4 SelectionErase Press the Erase / key to select the desired Erase modeElectronic Sorting KIT AR-EB3 Press the Margin Shift key Check the copy paper size Margin shiftLoading copy paper Sheet Paper Feed Unit AR-DE5Confirm that the misfeed indicator has gone out AR-DE5 Index Index Material Safety Data Sheet Flammable Limits Ignition TemperatureSpecial Fire Fighting Procedure Flash Point Method UsedIngredients CAS No Proportion Other LimitsMedical Conditions Generally Aggravated by Exposure None required under normal use Memo Class Laser Product Laser Klasse Page Sharp Corporation