POWER SAVE MODES
The copier has two power save modes to reduce overall power consumption thereby reduce the cost of operation. In addition, these modes conserve natural resources and help reduce environmental pollution. The two power save modes are preheat mode and auto power
●User programs
The preheat activation time and the auto power
* In European countries, the factory default setting is 30 sec.
GENERAL INFORMATION Power save modes
As an ENERGY STAR® Partner, SHARP has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
Preheat mode
When the copier enters the preheat mode, the POWER SAVE (
) indicator will light up and other indicators will remain on or off as before. In this condition, the fuser in the copier is maintained at a lower heat level, thereby saving power. The preheat level is, however, high enough to allow the copier to come to a ready condition or begin copying within 10 seconds after any key input or copier operation such as paper tray operation is performed.
Auto power shut-off mode
When the copier enters the auto power 
) indicator will light up and all other indicators will go out. The auto power
42