Sharp AR-162 Copying in the sort mode, Set the originals face up in the document feeder tray

ELECTRONIC SORTING KIT (AR-EB3)

Copying in the sort mode

When copying in the sort mode, the original image will be stored in the copier memory each time an original is scanned and copying will start after all originals have been scanned. To copy in the sort mode, an optional SPF (AR-SP2) is needed.

Electronic sorting kit (AR-EB3) OPTIONAL EQUIPMENT

60

1

2

3

4

Set the originals face up in the document feeder tray.

●The original table cannot be used for sort copying.

Press the SORT/GROUP ( / ) key to select the

SORT ( ) mode.

Ensure that the copy paper size in the paper tray is the same size as the originals.

●If an optional paper feed unit is installed, a paper tray with the corresponding paper size will be automatically selected.

Set the number of copies and press the START () key.

●Copying will start after the originals have been scanned. Up to 30 sheets of originals can be scanned. (If originals are fed continuously using the stream feeding mode, up to approximately 60 sheets of A4 (8-1/2" x 11") originals can be scanned. However, when copying originals which require more memory such as photographs, the number of originals which can be scanned will be less.) When the memory becomes full of scanned original image data, the ORIGINAL

DATA () indicator will blink.

When the ORIGINAL DATA () indicator blinks, the copier

will stop scanning. To start copying of scanned originals, press the

START () key. To cancel copying, press the CLEAR () or CLEAR ALL () key.