Sharp AR-162, AR-163 operation manual Copier TROUBLE?, Problem Solution

Page 48

COPIER TROUBLE?

GENERAL INFORMATION Copier trouble?

	Problem	Solution

		● Copier plugged in?	Plug the copier into a grounded outlet.
			See page 8.
	Copier does not operate.
	Copier does not operate.	● Power switch ON?	Turn the power switch ON.
		● Power switch ON?	Turn the power switch ON.
			See page 14.

	Copies are too dark or	● Copy density properly adjusted?	See pages 14 and 26.
	too light.

	Blank copies	● Is the original placed face down?	Place the original face down on the original
			table.

		● Paper too heavy?	Use copy paper within the specified range. See
			page 49.
	Copies smear if rubbed.
	Copies smear if rubbed.	● Paper damp?	Replace with dry copy paper.
		● Paper damp?	Replace with dry copy paper.
			Be sure to store copy paper in a dry location. See
			page 50.

	Striped copies	● Is transfer charger clean?	Clean the transfer charger.
			See page 45.

		● Non-standard paper used?	Use standard paper. If using special paper, feed
			the paper through the bypass tray.
			See pages 18 and 49.

		● Paper properly installed?	Make sure the paper is properly installed. See
			pages 10 and 18.
	Paper misfeeds frequently.

		● Pieces of paper inside copier?	Remove all pieces of misfed paper.
			See page 30.

		● Paper curled or damp?	Store copy paper flat in the wrapper in a dry
			location. See page 50.

	Paper misfeeds frequently in	● First copy curled?	If the first copy has curled up, flatten it and
	two-sided copying.		change the orientation of the original and copy
			paper.

46

Image 48

Contents AR-163 Follow the cautions below when using this copier Contents Introduction Conventions used in this manualAB series metric and inch series references Main Features Part Names and Functions Part Names and Functions Interrupt key and indicator p Zoom indicator p.17Paper Size indicators Alarm indicatorsStart key and indicator Preset Ratio selector keys and indicators pOriginal Size Enter key and indicators p Auto Paper Select indicatorCopier Installation Do not install your copier in areas that areDo not touch the photoconductive drum green portion Loading Copy Paper Gently lift and pull out the paper tray until it stopsPush the paper tray firmly back into the copier Loading Copy Paper Key Press the Start key and then the Paper Size Enter keyEnter your account number using the numeric keys When copying is completed, press the Audit Clear KeyAuditing Accounts Turn the power switch on Adjust the copy densityNormal Copying How to remove the platen cover Set the number of copies using the numeric keysNormal Copying Press the Start keyREDUCTION/ENLARGEMENT/ZOOM AutomaticPress the Auto Image Key Enter the number of copies Press the Start keyREDUCTION/ENLARGEMENT/ZOOM ManualSet the number of copies and press the Start key Bypass Feed special paper Unfold the bypass trayBypass Feed special paper TWO-SIDED Copying XY Zoom Press the XY-ZOOM keyPress the copy ratio display key Use the Preset Ratio selector , keys and zoom XY ZoomEnter the desired number of copies Press the Start key Reverse Press the B/W Reverse key Check the copy paper sizeDual page Copy Press the Dual page Copy keySet the number of copies Press the Start key When all Interrupt copies are finished, press Interrupting a Copy RUNPress the Interrupt key Automatic Exposure Adjustment Toner Save Mode To enter the toner save mode, press the light keyToner cartridge out. Remove the toner cartridge while Remove the new toner cartridge from the bag. HoldFive times Push the toner cartridge lock release lever and pullToner Cartridge Replacement Toner cartridge lifePress the light key Misfeed Removal Misfeed in the bypass trayMisfeed in the copier First confirm the misfeed locationMisfeed Removal Turn the roller rotating knob in the direction Arrow Misfeed in the paper tray Close the side cover by pressing the handle on CoverMaintenance Required Developer RequiredUser Programs List of user programsProgram No Program name Description Setting the user programs Enter a program number using the numeric keysUser Programs Program name Program NoSelect the desired parameter using the numeric keys OFFSettings for auditing accounts Select the desired setting using the numeric keysEnter a 3-digit account number using the numeric keys Program No Account number change Use the copy ratio display key to select the account Number Press and hold down the 0 keyProgram No Resetting account Power Save Modes Preheat modeAuto power shut-off mode Power Save Modes Setting the power save modesCopying from the preheat mode Copying from the auto power shut-off modeUser Maintenance Original table and platen coverBypass tray paper feed roller User Maintenance Transfer charger cleaningCharger cleaner out by holding the tab Problem Solution Copier TROUBLE?Copier TROUBLE? COPY/FAX keySelf-diagnostic function ExampleSupplies Types and sizes of copy paperSupplies Genuine supplies statementProper storage Store the supplies in a location that isSpecifications Specifications Optional Equipment System Configuration Specifications Single Pass Feeder AR-SP2Part Names Using the SPF Single Pass Feeder AR-SP2Misfeed removal Electronic Sorting KIT AR-EB3 Rotation copyingSort mode Group modeElectronic Sorting KIT AR-EB3 Sort/groupCopying in the sort mode Set the originals face up in the document feeder tray1 or 4 Enter the desired pattern number using a numeric key Press the 2 in 1 / 4Selection Key to completePress the Erase / key to select the desired Erase mode EraseElectronic Sorting KIT AR-EB3 Margin shift Press the Margin Shift key Check the copy paper sizeSheet Paper Feed Unit AR-DE5 Loading copy paperConfirm that the misfeed indicator has gone out AR-DE5 Index Index Material Safety Data Sheet Ignition Temperature Special Fire Fighting ProcedureFlash Point Method Used Flammable LimitsIngredients CAS No Proportion Other LimitsMedical Conditions Generally Aggravated by Exposure None required under normal use Memo Class Laser Product Laser Klasse Page Sharp Corporation