Sharp AM-400 manual Making a Copy, Using the auto document feeder

Making a Copy

2 Place the original on the document glass or in the auto document feeder.

Using the document glass:

Open the document glass cover and place the original face down on the glass with the top edge against the document guide.

• Make sure the centre of the original is

aligned with the centre mark on the document guide, and then close the cover.

•Note: The document glass is not suitable for making copies of books or other bound documents (the surface to be copied must lie flat on the glass).

Using the auto document feeder:

Adjust the document guide to the width of your original(s), and then insert the originals face up into the feeder.

•Up to 20 A4-size sheets can be inserted at once.

• For detailed information on using the auto document feeder and the types of originals that can be used, see pages 62 to 64.

Note: If an original is placed in both the auto document feeder and on the document glass, the original in the auto document feeder will be copied.

3 The default temporary copy settings are as follows. To change a setting,

see the following section, Selecting Temporary Copy Settings.

•Enlarge/reduce: 100%

•Number of copies: 1

•Quality: TEXT

(Note: The default quality setting can be changed as explained on page 59.)

54