Sharp XG-MB65X operation manual 2Adjusting the Image, Menu operation n

Page 44

Picture Adjustment (“Picture” menu) (Continued)

Menu operation n Page 37

2Adjusting the Image

Adjustment

O button

Q button

Items

 

 

 

 

 

Contrast

For less

For more

 

contrast.

contrast.

 

 

 

Bright

For less

For more

 

brightness.

brightness.

 

 

 

Red*1

For weaker red.

For stronger red.

Blue*1

For weaker

For stronger

 

blue.

blue.

Color*2

For less color

For more color

 

intensity.

intensity.

 

 

 

Tint*2 *3

For making skin

For making skin

 

tones purplish.

tones greenish.

 

 

 

Sharp*2

For less

For more

 

sharpness.

sharpness.

 

 

 

Bright Boost*1

For high fidelity

For more

 

color reproduc-

vividness.

 

tion.

 

 

 

 

*1 Not adjustable/selectable when selecting “sRGB”.

*2 Not displayed in the RGB input mode.

*3 “Tone” will appear on the menu screen only when PAL or SECAM signals are input (including when forcibly changed to those input signals). There is basically no need to adjust “Tone”, but you can adjust the picture tone with this adjustment when inputting PAL or SECAM signals .

Note

•“Bright Boost” and “CLR Temp” cannot be set when “sRGB” is selected.

•To reset all adjustment items, select “Reset” and press hENTER.

4Progressive

Selectable

Description

items

 

 

 

2D

Useful to display fast-moving images

Progressive

such as sports.

 

 

3D

Useful to display relatively slow-

Progressive

moving images such as drama and

 

documentary more clearly.

Film Mode

Reproduces the image of film source*

 

clearly. Displays the optimized image of

 

film transformed with three-two pull down

 

(NTSC and PAL60Hz) or two-two pull

 

down (PAL50Hz and SECAM) enhance-

 

ment to progressive mode images.

 

 

*The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progres- sive video at 60 frames/second with NTSC and PAL60Hz or at 50 frames/second with PAL50Hz and SECAM to play back a high-definition image.

Note

•In NTSC or PAL60Hz, even if the 3D Progres- sive mode has been set, the three-two pull down enhancement will be enabled automati- cally when the film source has been entered.

•When the image is blurred or noisy, switch to the optimal mode.

•When using progressive inputs, inputs are di- rectly displayed so that 2D Progressive, 3D Progressive and Film Mode cannot be se- lected.

3Adjusting the Color Temperature

Selectable

 

Description

items

 

 

 

 

 

 

5500K

For lower color temperature for

6500K

warmer, reddish incandescent-like

7500K

images.

P

8500K

 

R

9300K

 

 

 

10500K

For higher color temperature for

 

cooler, bluish, fluorescent-like images.

 

 

 

Note

•Values on “CLR Temp” are only for general standard purposes.

40

5Lamp Setting

Select-

 

 

Power

 

Bright-

Fan

consumption

 

able

Lamp Life

ness

sound

(When using

items

 

 

 

AC 110V)

 

 

 

 

 

Eco +

Approx.

Low

308W

Approx.

Quiet

80%

 

 

3,000

 

 

 

 

hours

 

 

 

 

 

Bright

100%

Normal

385W

Approx.

 

 

 

1,500

 

 

 

 

hours

 

 

 

 

 

Note

•When “Lamp Setting” is set to “Eco+Quiet”, the power consumption will decrease and the lamp life will extend. (Projection brightness decreases approximately 20%.)

Page 43 Page 45
Image 44
Page 43 Page 45
Contents XG-MB65X This Apparatus Must be Earthed If YOU have ANY DOUBT, Consult a Qualified ElectricianIii Page IntroductionENGLISH A. onlySharp PROJECTOR, Model XG-MB65X Sharp Electronics CorporationUsing the Menu Screen For Future ReferenceContents Reference Cleaning AccessoriesPower Sources Power-Cord ProtectionDamage Requiring Service Replacement PartsSafety Check OverloadingDo not block the exhaust and intake vents Rest your eyes occasionallyAvoid locations with extremes of tem- perature Other connected equipment Using the projector in other countriesTemperature monitor function Accessories Optional accessoriesProjector Height 29 AdjustPart Names and Functions Audio Input Rear ViewAudio Input 1 Break Timer Picture ModeInserting the Batteries Attach the cover and slide it until it clicks into placeUsable Range Height Setup and ProjectionQuick Start Upper side ProjectorSetting up the Projector Setting up the ProjectorStandard Setup Front Projection Ceiling-mount SetupProjection PRJ Mode Example Normal Mode Picture SizeProjection DistanceScreen Size and Projection Distance Normal ModeStretch Mode COMPUTER-RGB/COMPONENT ConnectionsInput Terminals and Connectable Main Equipment Samples of Cables for Connection Computer To INPUT1 terminal To Audio Terminal Connecting to a ComputerTo audio output terminal To RGB output terminal Connecting to Video Equipment When using an S-video cable INPUT3Connecting to a Monitor with RGB Input Terminal When using a composite video cable INPUT4To RS-232C terminal Connecting the Power CordControlling the Projector by a Computer Turning the Projector On/Off Turning the Projector onAbout the Setup Guide Adjusting the Projected Image Adjusting the FocusAdjusting the Screen Size Image ProjectionAdjusting the Height Use the rear adjustment foot to make the projector levelAdjust lever Make small adjustments Rear adjustment footAV Mute button Volume buttons Input buttons Switching the Input ModeAdjusting the Volume Press g Keystone to enter Keystone Correction mode Press P/Q or O/R to adjust Keystone CorrectionCorrecting Trapezoidal Distortion Press g KeystoneResize Mode Press HresizeVideo Operating with the Remote Control Auto Sync Auto Sync AdjustmentDisplaying and Setting the Break Timer Selecting the Picture ModeInput 1 Component/INPUT Component/INPUT 3/INPUT Menu ItemsInput 1 RGB/INPUT2 RGB Items you can set with Help menu Help menu nUsing the Menu Screen Menu Selections AdjustmentsPress Q or O and select Picture to adjust Press BmenuTo adjust the projected image while watching it Press P or R and select Bright to adjustPress O or Q to adjust the item selected Press hENTERPicture Adjustment Picture menu Example Picture screen menu for Input 1 RGB mode2Adjusting the Image Menu operation nAdjusting the Projected Image SCR ADJ menu Set Auto Keystone on the SCR ADJ menu to OnYou can move the projected image vertically Button For Manual Keystone CorrectionAdjusting the Projected Image SCR ADJ menu Adjusting the Projector Function PRJ ADJ menu Adjusting the Projector Function PRJ ADJ menu This function changes the fan rotation speedATaking the Keylock off Enter the same keycode in Re- confirmLocking the Operation Buttons Troubleshooting with Help menu Utilizing Help menu functionsMaintenance Cleaning the projectorMaintenance Indicators Temperature warning indicator Lamp indicator Power indicatorPlease exercise care when Replacing the Lamp Regarding the LampLamp Remove the lamp unit cover Removing and Installing the Lamp UnitDisconnect the power cord Resetting the Lamp Timer Connecting Pin Assignments GNDRS-232C Specifications and Command Settings Return code 0DHCommands Control Contents Input 4 CLR Temp *2 OK or ERR Computer Compatibility Chart PC/MACTroubleshooting 23-26Input 1 Component For Sharp Assistance Specifications XG-MB65XDimensions Index
Top Page Image Contents