Sharp XG-MB65X operation manual Adjusting the Projector Function PRJ ADJ menu

Adjusting the Projector Function (“PRJ - ADJ” menu)

Menu operation n Page 37

Picture	SCR - ADJ PRJ - ADJ	Help
Auto Search	On
Auto Sync	On
Auto Power Off	On
System Sound	On
Speaker	On
RS-232C	9600 bps
Fan Mode	Normal

System Lock

	Lamp Timer(Life)	0 h	100%
SEL./ADJ.		ENTER	END

1Auto Search Function

This function automatically searches for and switches to the input mode in which signals are being received, when the projector is turned on, or when the INPUT button is pressed.

Note

When “Auto Search” is set to “On”

•If two or more input signals are found, the pro- jector selects the input source in the order of INPUT 1 n INPUT 2 n INPUT 3 n INPUT 4 when you press INPUT (P/R) on the projec- tor.

•While “Auto Search” is set to “On”, press CINPUT 1,CINPUT 2, DINPUT 3 or EINPUT 4 on the remote control to select an input mode other than the input mode se- lected by the projector.

3Auto Power Off

	Function
Selectable		Description
	items
On		When no input signal is detected for
		more than 15 minutes, the projector will
		automatically enter standby mode.
Off		The Auto Power Off function will be
		disabled.

Note

•When the Auto Power Off function is set to “On”, 5 minutes before the projector enters standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes.

2Auto Sync (Auto Sync Adjustment)

Selectable items	Description
On	Auto Sync adjustment will
	occur when the projector is
	turned on or when the input
	signals are switched, when
	connected to a computer.
Off	Auto Sync adjustment is not
	automatically performed.

Note

•Auto Sync adjustment is also performed by pressing F AUTO SYNC on the remote con- trol.

•The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector.

•When the optimum image cannot be achieved with Auto Sync adjustment, use manual ad- justments. (See page 46.)

4Setting the Confirmation Sound (System Sound)

Selectable	Description
items
On	A confirmation sound is made when
	the projector turns on/off.
Off	No confirmation sound is made.

5Speaker Setting

Selectable	Description
items
On	The audio signal is output from the
	internal speaker.
Off	The audio signal is not output from the
	internal speaker.

Features Useful

43