Sharp XG-C60X operation manual Setting up the Screen, Throw Distance

Page 31

Setting up the Screen

Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image.

Note

•The projector lens should be centered in the middle of the screen. If the horizontal line passing through the lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.

•For optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.

•A polarizing screen cannot be used with this projector.

Three optional lenses from Sharp are also available for specialized application. Contact your local Sharp Authorized Projector Dealer for details on the lens. (Refer to the lens installation manual when attaching a lens.)

Throw Distance

■The graph below is for 100 inches (254 cm) screen with 4:3 normal mode.

Connections and

Screen

AN-C12MZ 7'11" – 10' (2.4 – 3.0m) Throw ratio 1:1.18 – 1.48

Standard

11'11" – 15'4" (3.6 – 4.7m) Throw ratio 1:1.77 – 2.25

AN-C27MZ 17'9" – 28'1'' (5.4 – 8.6m) Throw ratio 1:2.7 – 4.3

AN-C41MZ

27' – 38'1'' (8.2 – 11.6m) Throw ratio 1:4.1 – 5.8

Setup

5

10

15

20

25

30

35

40 (ft)

Standard Setup (Front Projection)

■Place the projector at the required distance from the screen

according to the desired picture size. (See page 28.)

Example of Standard Setup

Side View

90°

Audience

•The distance from the screen to the projector may vary depending on the size of the screen.

P.28

•The default setting can be used, when placing the projector in front of the screen. If the projected im-

age is reversed or inverted, readjust the setting to

“Front” in “PRJ Mode”.

P.71

Top View

•Place the projector so that an imaginary horizontal line that passes through the center of the lens is

90°

perpendicular to the screen.

-27

XG-C60X_E_PDF_p25_32.p65

27

03.8.28, 2:07 PM

Page 30 Page 32
Image 31
Page 30 Page 32
Contents XG-C60X Model No. XG-C60X Serial No Special Note for Users in the U.K 03.8.28, 155 PM Introduction Product Disposal When Attaching the Quick Guide LabelNew Edge Up-Scaling Outstanding FeaturesColor Management System Noise ReductionContents Appendix Power-Cord Protection CleaningAccessories Power SourcesWall or Ceiling Mounting Damage Requiring ServiceReplacement Parts Safety CheckRest your eyes occasionally Avoid locations with high or low temperatureUsing the projector in other countries Temperature monitor functionFor Macintosh To install Acrobat Reader from the CD-ROMFor other operating systems For other languages For WindowsProjector Front and Top View Part NamesProjector Rear View Using the Kensington LockRemote Control Top View Remote Control Front ViewPart Names Inserting the Batteries Using the Remote ControlAvailable Range of the Remote Control When using the remote controlSupplied accessories AccessoriesOptional cable Connections and Setup An audio cable commercially available See Connecting the Projector to Other DevicesBefore Connecting This projector can be connected toConnecting to a Computer Using the RGB Cable Connecting the Power CordFerrite core Connecting the thumbscrew cablesConnecting to Video Equipment Connecting to Component Video Equipment Connecting to an Amplifier or Other Audio Components Connecting to an AmplifierControlling the Projector by a Computer Watching Images on Both the Projector and a Monitor Connecting the Remote Control to the ProjectorPress or while using presentation software on your computer Using the Wireless Pre- sentation FunctionButton Using the Adjustment Feet SetupFocus ring Zoom knob Adjusting the LensOut Zoom Throw Distance Setting up the ScreenStretch Mode Normal ModeScreen Size and Projection Distance AN-C41MZ Optional accessory Throw ratio 14.1 to AN-C27MZ Optional accessory Throw ratio 12.7 to AN-C12MZ Optional accessory Throw ratio 11.18 to Projection from behind the screen Projecting a Reversed/Inverted ImageBasic Operation Image Projection Basic ProcedurePlug the power cord into the wall outlet Press on the projector or on the remote controlPress or on the remote control to adjust the volume Press , , or on the remote control to select the Input modeInput buttons Volume buttons Press to temporarily turn off the sound Selecting the On-screen Display LanguagePress Standby button Enter button Turning the Power offPress Standby on the projector Menu button Buttons Mute buttonKeystone button Enter button Undo button Buttons Press , , \ and to adjust the Keystone correctionCorrecting Trapezoidal Distortion Keystone Correction Correcting Trapezoidal DistortionDigital Shift Setting Sub menu Menu Bar ItemsMain menu Sub menu Input 3 / 4 ModeMenu Selections Adjustments Using the Menu ScreenMenu Bar Main Menu Enter button Buttons Menu button Press or to select the item you want to adjust Press \ or to select the menu you want to adjustPress \or to adjust the item selected Press or to select the item you want to set Menu Selections SettingsEnter button Buttons Menu button Cursor shifts to the sub menu Adjusting Image Preferences Adjusting the PictureSelecting the Signal Type Progressive Mode Computer Image Adjustment Adjusting Computer ImagesSaving Adjustment Settings Special Mode Settings Selecting Adjustment SettingsChecking the Input Signal Auto Sync Display Function Auto Sync AdjustmentWhen setting to Normal or High Speed Manual adjustments should be per- formedEasy to Use Functions Switching the Picture Display Using Different Input Signals Selecting the Picture Display ModeResize button Screen display of the picture display mode Video Freezing a Moving Image Displaying a Still ImageFreeze button Displaying an Enlarged Portion of an Image Enlarging a Specific Portion of an ImageButtons Enlarge Enlarge/ Reduce buttons Gamma Correction Function Adjusting Gamma CorrectionDisplaying the Inset Picture Displaying Dual Pictures Pict in PictPress to move the inset pic- ture This function can be used to display a black screen Black Screen FunctionBlacking out the Pro- jected Image To return to the original projected image, press againButtons Break Timer button Displaying the Break TimerDisplaying and Setting the Break Timer Press to cancel the break timerSelecting the Target Color Selecting the Color Reproduction ModeSetting the Chromatic Value of the Target Color Setting the Brightness of the Target ColorSetting the Hue of the Target Color Overview of All Color Settings Resetting User-Defined Color SettingsSetting on/off the Inter- nal Speaker Setting the Audio Output TypeSetting on/off the Internal Speaker Setting the Audio Out- put TypeAuto Search Function Using Auto SearchTurning Off On-screen Display Setting On-screen DisplayVideo Digital Noise Reduction DNR System Reducing Image NoiseSetting the Video System Setting the Video SystemCapturing the Image Saving Projected ImagesDeleting the Captured Image Selecting a Startup Image Setting a Background ImageSelecting a Startup Image Selecting a Background ImageSetting the Power Save Mode Selecting the Economy ModeMonitor Out/RS-232C Off Function Checking the Remaining Lamp Life Percentage Auto Power Off FunctionSelecting the Economy Mode Displaying the Remaining Lamp Life PercentageLocking the Operation Buttons on the Projector Setting the Projection ModeSetting up the Keylock Reversing/Inverting Projected ImagesSelecting the Transmission Speed RS-232C Canceling the Keylock SettingSelecting the Transmis- sion Speed RS-232C Entering the Password Setting up a PasswordIf You Forget Your Password Changing the PasswordEntering the Keycode Setting the Anti-TheftEnter the same 4-digit keycode in Reconfirm Changing the KeycodeReturning to Default Settings Initializing the SettingsOverview of All Menu Settings Displaying the Adjustment SettingsAppendix Cleaning the exhaust and intake vents MaintenanceCleaning the projector Cleaning the lensRemove the bottom filter cover Cleaning and replacing the bottom air filterDisconnect the power cord Replacing the Air FilterReplace the air filter Clean the air filterReplace the filter cover About the temperature warning indicator Maintenance IndicatorsAbout the lamp indicator Maintenance Indicators Lamp Regarding the LampReplacing the Lamp Remove the lamp unit cover Removing and Install- ing the Lamp UnitAC socket User service screw Change the air filterResetting the Lamp Timer RGB Input Component Input Connecting Pin AssignmentsCommunication conditions RS-232C Specifications and Command SettingsCommands PC controlRS-232C Specifications and Command Settings Options Control Contents Function and transmission codes Wired Remote Control Terminal SpecificationsSpecifications of wired remote control input Sharp remote control signal formatVGA Computer Compatibility ChartTroubleshooting Sxga For Sharp Assistance Ntsc 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM SpecificationsUnits inches mm DimensionsAdvanced intelligent compression Glossary100 Index101 Sharp Corporation

XG-C60X specifications

The Sharp XG-C60X is an advanced DLP projector renowned for its vivid image quality and versatile functionality, making it an ideal choice for various applications, including business presentations, educational environments, and home cinema setups. This projector features a compact design, allowing for easy portability while still delivering exceptional performance.

One of the main highlights of the Sharp XG-C60X is its bright 3000 ANSI lumens brightness. This high brightness level ensures clear and vibrant images even in well-lit rooms, reducing the need to dim lights during presentations or movie screenings. Coupled with a high contrast ratio of 2500:1, the XG-C60X provides deep blacks and bright whites, enhancing overall image clarity and detail.

The XG-C60X utilizes DLP (Digital Light Processing) technology, which offers remarkable color accuracy and consistency. This ensures that colors remain true to life, providing a superior viewing experience. The projector supports a native resolution of XGA (1024 x 768), making it suitable for displaying text-heavy content and detailed visuals. Additionally, it can handle various input resolutions, ensuring compatibility with different video sources.

Another notable feature of the XG-C60X is its extensive connectivity options. It includes multiple inputs such as HDMI, VGA, S-Video, and composite video, allowing users to connect a wide range of devices, from computers and laptops to DVD players and gaming consoles. This versatility makes it easy to integrate the projector into existing setups and adapt to various presentation needs.

Portability is further enhanced by the projector's lightweight design. Weighing in at just a few pounds, it can be easily transported between locations, making it an excellent choice for traveling professionals. The built-in speaker adds an extra level of convenience for presentations, eliminating the need for external audio equipment in smaller settings.

The XG-C60X also features eco-friendly technologies, including a long lamp life of up to 4000 hours in eco mode. This not only reduces maintenance costs but also minimizes environmental impact. The easy-to-use control panel and remote enhance user convenience, providing quick access to essential functions and settings.

In summary, the Sharp XG-C60X stands out as a powerful and flexible projector, combining excellent brightness, connectivity options, and portability. Whether for business use, educational purposes, or home entertainment, it meets a variety of projection needs with high-quality performance and user-friendly features.
Top Page Image Contents