Sharp XG-C60X operation manual Sxga

Page 99

Problem

 

Check

Page

 

•

The signal in INPUT 1 or 2 is set to a resolution that exceeds

57

Pict in Pict does not

•

SXGA.

 

The signal in INPUT 1 or 2 is sending Component signals 480I,

 

work.

•

480P, 540P, 580I, 580P, 720P, 1035I or 1080I.

 

 

The signal in INPUT 1 or 2 is set to interlace mode using RGB

 

 

 

signals.

 

The projector cannot be

•

The Keylock level is set.

71

turned on or put into the

 

If the Keylock level is set to Level B, all the buttons are locked.

 

standby mode using the

 

If the Keylock level is set to Level A, only the INPUT and

 

ON or STANDBY button

 

VOLUME buttons are functional.

 

on the projector.

 

 

 

Picture is green on

•

Change the input signal type setting.

46

INPUT 1 or 2

 

 

 

COMPONENT.

 

 

 

Picture is pink (no green)

 

 

 

on INPUT 1 or 2 RGB.

 

 

 

Picture is dark.

•

The lamp indicator is blinking in red. Replace the lamp.

83

Picture is too bright and

•

Picture adjustments are incorrectly set.

46

whitish.

 

 

 

 

The VOLUME buttons do not work when: (try the VOL+/– on the

—

 

remote control)

 

The VOLUME buttons

•

when the menu is displayed

 

on the projector do not

•

when the lens menu is displayed

 

work.

•

when Pict in Pict is working

 

 

•

during Enlarge (More than double size)

 

 

•

a dot by dot screen resolution larger the panel resolution

 

A response code cannot

•

In the case of transmitting RS-232C commands from a

89

be received when the

 

computer during standby, it takes a maximum of 30 seconds for

 

projector was attempted

 

the computer to receive the response code. Set the response

 

to be controlled using

 

code waiting time of the computer to 30 seconds or more.

 

RS-232C commands

 

 

 

from a computer during

 

 

 

standby.

 

 

 

Appendix

-95

XG-C60X_E_PDF_p94_101.p65

95

03.8.28, 2:29 PM

Page 98 Page 100
Image 99
Page 98 Page 100
Contents XG-C60X Model No. XG-C60X Serial No Special Note for Users in the U.K 03.8.28, 155 PM Introduction Product Disposal When Attaching the Quick Guide LabelNew Edge Up-Scaling Outstanding FeaturesColor Management System Noise ReductionContents Appendix Power-Cord Protection CleaningAccessories Power SourcesWall or Ceiling Mounting Damage Requiring ServiceReplacement Parts Safety CheckRest your eyes occasionally Avoid locations with high or low temperatureUsing the projector in other countries Temperature monitor functionFor Macintosh To install Acrobat Reader from the CD-ROMFor other operating systems For other languages For WindowsProjector Front and Top View Part NamesProjector Rear View Using the Kensington LockRemote Control Front View Remote Control Top ViewPart Names Inserting the Batteries Using the Remote ControlAvailable Range of the Remote Control When using the remote controlAccessories Supplied accessoriesOptional cable Connections and Setup An audio cable commercially available See Connecting the Projector to Other DevicesBefore Connecting This projector can be connected toConnecting to a Computer Using the RGB Cable Connecting the Power CordFerrite core Connecting the thumbscrew cablesConnecting to Video Equipment Connecting to Component Video Equipment Connecting to an Amplifier or Other Audio Components Connecting to an AmplifierControlling the Projector by a Computer Watching Images on Both the Projector and a Monitor Connecting the Remote Control to the ProjectorUsing the Wireless Pre- sentation Function Press or while using presentation software on your computerButton Using the Adjustment Feet SetupAdjusting the Lens Focus ring Zoom knobOut Zoom Throw Distance Setting up the ScreenNormal Mode Stretch ModeScreen Size and Projection Distance AN-C41MZ Optional accessory Throw ratio 14.1 to AN-C27MZ Optional accessory Throw ratio 12.7 to AN-C12MZ Optional accessory Throw ratio 11.18 to Projection from behind the screen Projecting a Reversed/Inverted ImageBasic Operation Image Projection Basic ProcedurePlug the power cord into the wall outlet Press on the projector or on the remote controlPress , , or on the remote control to select the Input mode Press or on the remote control to adjust the volumeInput buttons Volume buttons Selecting the On-screen Display Language Press to temporarily turn off the soundPress Standby button Enter button Turning the Power offPress Standby on the projector Menu button Buttons Mute buttonKeystone button Enter button Undo button Buttons Press , , \ and to adjust the Keystone correctionCorrecting Trapezoidal Distortion Keystone Correction Correcting Trapezoidal DistortionDigital Shift Setting Sub menu Menu Bar ItemsMain menu Sub menu Input 3 / 4 ModeUsing the Menu Screen Menu Selections AdjustmentsMenu Bar Main Menu Enter button Buttons Menu button Press \ or to select the menu you want to adjust Press or to select the item you want to adjustPress \or to adjust the item selected Menu Selections Settings Press or to select the item you want to setEnter button Buttons Menu button Cursor shifts to the sub menu Adjusting the Picture Adjusting Image PreferencesSelecting the Signal Type Progressive Mode Adjusting Computer Images Computer Image AdjustmentSaving Adjustment Settings Selecting Adjustment Settings Special Mode SettingsChecking the Input Signal Auto Sync Display Function Auto Sync AdjustmentWhen setting to Normal or High Speed Manual adjustments should be per- formedEasy to Use Functions Selecting the Picture Display Mode Switching the Picture Display Using Different Input SignalsResize button Screen display of the picture display mode Video Displaying a Still Image Freezing a Moving ImageFreeze button Enlarging a Specific Portion of an Image Displaying an Enlarged Portion of an ImageButtons Enlarge Enlarge/ Reduce buttons Gamma Correction Function Adjusting Gamma CorrectionDisplaying Dual Pictures Pict in Pict Displaying the Inset PicturePress to move the inset pic- ture This function can be used to display a black screen Black Screen FunctionBlacking out the Pro- jected Image To return to the original projected image, press againButtons Break Timer button Displaying the Break TimerDisplaying and Setting the Break Timer Press to cancel the break timerSelecting the Target Color Selecting the Color Reproduction ModeSetting the Brightness of the Target Color Setting the Chromatic Value of the Target ColorSetting the Hue of the Target Color Overview of All Color Settings Resetting User-Defined Color SettingsSetting on/off the Inter- nal Speaker Setting the Audio Output TypeSetting on/off the Internal Speaker Setting the Audio Out- put TypeAuto Search Function Using Auto SearchTurning Off On-screen Display Setting On-screen DisplayVideo Digital Noise Reduction DNR System Reducing Image NoiseSetting the Video System Setting the Video SystemSaving Projected Images Capturing the ImageDeleting the Captured Image Selecting a Startup Image Setting a Background ImageSelecting a Startup Image Selecting a Background ImageSelecting the Economy Mode Setting the Power Save ModeMonitor Out/RS-232C Off Function Checking the Remaining Lamp Life Percentage Auto Power Off FunctionSelecting the Economy Mode Displaying the Remaining Lamp Life PercentageLocking the Operation Buttons on the Projector Setting the Projection ModeSetting up the Keylock Reversing/Inverting Projected ImagesCanceling the Keylock Setting Selecting the Transmission Speed RS-232CSelecting the Transmis- sion Speed RS-232C Entering the Password Setting up a PasswordIf You Forget Your Password Changing the PasswordEntering the Keycode Setting the Anti-TheftEnter the same 4-digit keycode in Reconfirm Changing the KeycodeReturning to Default Settings Initializing the SettingsOverview of All Menu Settings Displaying the Adjustment SettingsAppendix Cleaning the exhaust and intake vents MaintenanceCleaning the projector Cleaning the lensRemove the bottom filter cover Cleaning and replacing the bottom air filterDisconnect the power cord Replacing the Air FilterClean the air filter Replace the air filterReplace the filter cover Maintenance Indicators About the temperature warning indicatorAbout the lamp indicator Maintenance Indicators Regarding the Lamp LampReplacing the Lamp Remove the lamp unit cover Removing and Install- ing the Lamp UnitAC socket User service screw Change the air filterResetting the Lamp Timer RGB Input Component Input Connecting Pin AssignmentsCommunication conditions RS-232C Specifications and Command SettingsCommands PC controlRS-232C Specifications and Command Settings Options Control Contents Function and transmission codes Wired Remote Control Terminal SpecificationsSpecifications of wired remote control input Sharp remote control signal formatVGA Computer Compatibility ChartTroubleshooting Sxga For Sharp Assistance Ntsc 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM SpecificationsUnits inches mm DimensionsAdvanced intelligent compression Glossary100 Index101 Sharp Corporation

XG-C60X specifications

The Sharp XG-C60X is an advanced DLP projector renowned for its vivid image quality and versatile functionality, making it an ideal choice for various applications, including business presentations, educational environments, and home cinema setups. This projector features a compact design, allowing for easy portability while still delivering exceptional performance.

One of the main highlights of the Sharp XG-C60X is its bright 3000 ANSI lumens brightness. This high brightness level ensures clear and vibrant images even in well-lit rooms, reducing the need to dim lights during presentations or movie screenings. Coupled with a high contrast ratio of 2500:1, the XG-C60X provides deep blacks and bright whites, enhancing overall image clarity and detail.

The XG-C60X utilizes DLP (Digital Light Processing) technology, which offers remarkable color accuracy and consistency. This ensures that colors remain true to life, providing a superior viewing experience. The projector supports a native resolution of XGA (1024 x 768), making it suitable for displaying text-heavy content and detailed visuals. Additionally, it can handle various input resolutions, ensuring compatibility with different video sources.

Another notable feature of the XG-C60X is its extensive connectivity options. It includes multiple inputs such as HDMI, VGA, S-Video, and composite video, allowing users to connect a wide range of devices, from computers and laptops to DVD players and gaming consoles. This versatility makes it easy to integrate the projector into existing setups and adapt to various presentation needs.

Portability is further enhanced by the projector's lightweight design. Weighing in at just a few pounds, it can be easily transported between locations, making it an excellent choice for traveling professionals. The built-in speaker adds an extra level of convenience for presentations, eliminating the need for external audio equipment in smaller settings.

The XG-C60X also features eco-friendly technologies, including a long lamp life of up to 4000 hours in eco mode. This not only reduces maintenance costs but also minimizes environmental impact. The easy-to-use control panel and remote enhance user convenience, providing quick access to essential functions and settings.

In summary, the Sharp XG-C60X stands out as a powerful and flexible projector, combining excellent brightness, connectivity options, and portability. Whether for business use, educational purposes, or home entertainment, it meets a variety of projection needs with high-quality performance and user-friendly features.
Top Page Image Contents