Sharp XG-C60X operation manual Product Disposal, When Attaching the Quick Guide Label

Page 6

WARNING:

The cooling fan in this projector continues to run for about 90 seconds after the projector enters the standby mode. During normal operation, when putting the projector into the standby mode always use the STANDBY button on the projector or on the remote control. Ensure the cooling fan has stopped before disconnecting the power cord.

DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER CORD. FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE.

PRODUCT DISPOSAL

This projector utilizes tin-lead solder, and a pressurized lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or, if you are located in the United States of America, the Electronic Industries Alliance: www.eiae.org .

Caution Concerning the Lamp Replacement

See “Replacing the Lamp” on page 85.

LAMP REPLACEMENT CAUTION

BEFORE REMOVING THE SCREW, DISCONNECT POWER CORD.

HOT SURFACE INSIDE. ALLOW 1 HOUR TO COOL BEFORE REPLACING THE LAMP.

REPLACE WITH SAME SHARP LAMP UNIT TYPE BQC-XGC55X//1 ONLY.

UV RADIATION : CAN CAUSE EYE DAMAGE. TURN OFF LAMP BEFORE SERVICING.

HIGH PRESSURE LAMP : RISK OF EXPLOSION. POTENTIAL HAZARD OF GLASS

PARTICLES IF LAMP HAS RUPTURED. HANDLE WITH CARE. SEE OPERATION MANUAL.

PRECAUTIONS A OBSERVER LORS DU

REMPLACEMENT DE LA LAMPE.

DEBRANCHER LE CORDON D’ALIMENTATION AVANT DE RETIRER LES VIS.

L’INTERIEUR DU BOITIER ETANT EXTREMEMENT CHAUD, ATTENDRE 1 HEURE

AVANT DE PROCEDER AU REMPLACEMENT DE LA LAMPE.

NE REMPLACER QUE PAR UNE LAMPE SHARP DE TYPE BQC-XGC55X//1.

RAYONS ULTRAVIOLETS : PEUVENT ENDOMMAGER LES YEUX.

ETEINDRE LA LAMPE AVANT DE PROCEDER A L’ENTRETIEN.

LAMPE A HAUTE PRESSION : RISQUE D’EXPLOSION. DANGER POTENTIEL

DE PARTICULES DE VERRE EN CAS D’ECLATEMENT DE LA LAMPE.

A MANIPULER AVEC PRECAUTION, SE REPORTER AU MODE D’EMPLOI.

This SHARP projector uses an LCD (Liquid Crystal Display) panel. This very sophisticated panel contains 786,432 pixels (⋅ RGB) TFTs (Thin Film Transistors). As with any high technology electronic equipment such as large screen TVs, video systems and video cameras, there are certain acceptable tolerances that the equipment must conform to. This unit has some inactive pixels within acceptable tolerances which may result in inactive dots on the picture screen. This will not affect the picture quality or the life expectancy of the unit.

When Attaching the “QUICK GUIDE” Label

Attaching the “QUICK GUIDE” Label (supplied) on the

 

projector will help you check the setup procedure. When

 

you attach the “QUICK GUIDE” Label on the projector,

 

be sure to align the label bottom and the upper part of

 

the “Notevision” logo on the top cabinet of the projector

“QUICK GUIDE” Label

as shown in the drawing on the right.

-2

XG-C60X_E_PDF_p01_03.p65

2

03.8.28, 1:55 PM

Page 5 Page 7
Image 6
Page 5 Page 7
Contents XG-C60X Model No. XG-C60X Serial No Special Note for Users in the U.K 03.8.28, 155 PM Introduction When Attaching the Quick Guide Label Product DisposalNoise Reduction Outstanding FeaturesColor Management System New Edge Up-ScalingContents Appendix Power Sources CleaningAccessories Power-Cord ProtectionSafety Check Damage Requiring ServiceReplacement Parts Wall or Ceiling MountingTemperature monitor function Avoid locations with high or low temperatureUsing the projector in other countries Rest your eyes occasionallyFor Windows To install Acrobat Reader from the CD-ROMFor other operating systems For other languages For MacintoshPart Names Projector Front and Top ViewUsing the Kensington Lock Projector Rear ViewRemote Control Front View Remote Control Top ViewPart Names When using the remote control Using the Remote ControlAvailable Range of the Remote Control Inserting the BatteriesAccessories Supplied accessoriesOptional cable Connections and Setup This projector can be connected to Connecting the Projector to Other DevicesBefore Connecting An audio cable commercially available SeeConnecting the Power Cord Connecting to a Computer Using the RGB CableConnecting the thumbscrew cables Ferrite coreConnecting to Video Equipment Connecting to Component Video Equipment Connecting to an Amplifier Connecting to an Amplifier or Other Audio ComponentsControlling the Projector by a Computer Connecting the Remote Control to the Projector Watching Images on Both the Projector and a MonitorUsing the Wireless Pre- sentation Function Press or while using presentation software on your computerButton Setup Using the Adjustment FeetAdjusting the Lens Focus ring Zoom knobOut Zoom Setting up the Screen Throw DistanceNormal Mode Stretch ModeScreen Size and Projection Distance AN-C41MZ Optional accessory Throw ratio 14.1 to AN-C27MZ Optional accessory Throw ratio 12.7 to AN-C12MZ Optional accessory Throw ratio 11.18 to Projecting a Reversed/Inverted Image Projection from behind the screenBasic Operation Press on the projector or on the remote control Basic ProcedurePlug the power cord into the wall outlet Image ProjectionPress , , or on the remote control to select the Input mode Press or on the remote control to adjust the volumeInput buttons Volume buttons Selecting the On-screen Display Language Press to temporarily turn off the soundPress Menu button Buttons Mute button Turning the Power offPress Standby on the projector Standby button Enter buttonCorrecting Trapezoidal Distortion Press , , \ and to adjust the Keystone correctionCorrecting Trapezoidal Distortion Keystone Correction Keystone button Enter button Undo button ButtonsDigital Shift Setting Menu Bar Items Sub menuInput 3 / 4 Mode Main menu Sub menuUsing the Menu Screen Menu Selections AdjustmentsMenu Bar Main Menu Enter button Buttons Menu button Press \ or to select the menu you want to adjust Press or to select the item you want to adjustPress \or to adjust the item selected Menu Selections Settings Press or to select the item you want to setEnter button Buttons Menu button Cursor shifts to the sub menu Adjusting the Picture Adjusting Image PreferencesSelecting the Signal Type Progressive Mode Adjusting Computer Images Computer Image AdjustmentSaving Adjustment Settings Selecting Adjustment Settings Special Mode SettingsChecking the Input Signal Manual adjustments should be per- formed Auto Sync AdjustmentWhen setting to Normal or High Speed Auto Sync Display FunctionEasy to Use Functions Selecting the Picture Display Mode Switching the Picture Display Using Different Input SignalsResize button Screen display of the picture display mode Video Displaying a Still Image Freezing a Moving ImageFreeze button Enlarging a Specific Portion of an Image Displaying an Enlarged Portion of an ImageButtons Enlarge Enlarge/ Reduce buttons Adjusting Gamma Correction Gamma Correction FunctionDisplaying Dual Pictures Pict in Pict Displaying the Inset PicturePress to move the inset pic- ture To return to the original projected image, press again Black Screen FunctionBlacking out the Pro- jected Image This function can be used to display a black screenPress to cancel the break timer Displaying the Break TimerDisplaying and Setting the Break Timer Buttons Break Timer buttonSelecting the Color Reproduction Mode Selecting the Target ColorSetting the Brightness of the Target Color Setting the Chromatic Value of the Target ColorSetting the Hue of the Target Color Resetting User-Defined Color Settings Overview of All Color SettingsSetting the Audio Out- put Type Setting the Audio Output TypeSetting on/off the Internal Speaker Setting on/off the Inter- nal SpeakerUsing Auto Search Auto Search FunctionReducing Image Noise Setting On-screen DisplayVideo Digital Noise Reduction DNR System Turning Off On-screen DisplaySetting the Video System Setting the Video SystemSaving Projected Images Capturing the ImageDeleting the Captured Image Selecting a Background Image Setting a Background ImageSelecting a Startup Image Selecting a Startup ImageSelecting the Economy Mode Setting the Power Save ModeMonitor Out/RS-232C Off Function Displaying the Remaining Lamp Life Percentage Auto Power Off FunctionSelecting the Economy Mode Checking the Remaining Lamp Life PercentageReversing/Inverting Projected Images Setting the Projection ModeSetting up the Keylock Locking the Operation Buttons on the ProjectorCanceling the Keylock Setting Selecting the Transmission Speed RS-232CSelecting the Transmis- sion Speed RS-232C Setting up a Password Entering the PasswordChanging the Password If You Forget Your PasswordSetting the Anti-Theft Entering the KeycodeChanging the Keycode Enter the same 4-digit keycode in ReconfirmInitializing the Settings Returning to Default SettingsDisplaying the Adjustment Settings Overview of All Menu SettingsAppendix Cleaning the lens MaintenanceCleaning the projector Cleaning the exhaust and intake ventsReplacing the Air Filter Cleaning and replacing the bottom air filterDisconnect the power cord Remove the bottom filter coverClean the air filter Replace the air filterReplace the filter cover Maintenance Indicators About the temperature warning indicatorAbout the lamp indicator Maintenance Indicators Regarding the Lamp LampReplacing the Lamp Change the air filter Removing and Install- ing the Lamp UnitAC socket User service screw Remove the lamp unit coverResetting the Lamp Timer Connecting Pin Assignments RGB Input Component InputPC control RS-232C Specifications and Command SettingsCommands Communication conditionsRS-232C Specifications and Command Settings Options Control Contents Sharp remote control signal format Wired Remote Control Terminal SpecificationsSpecifications of wired remote control input Function and transmission codesComputer Compatibility Chart VGATroubleshooting Sxga For Sharp Assistance Specifications Ntsc 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAMDimensions Units inches mmGlossary Advanced intelligent compressionIndex 100101 Sharp Corporation

XG-C60X specifications

The Sharp XG-C60X is an advanced DLP projector renowned for its vivid image quality and versatile functionality, making it an ideal choice for various applications, including business presentations, educational environments, and home cinema setups. This projector features a compact design, allowing for easy portability while still delivering exceptional performance.

One of the main highlights of the Sharp XG-C60X is its bright 3000 ANSI lumens brightness. This high brightness level ensures clear and vibrant images even in well-lit rooms, reducing the need to dim lights during presentations or movie screenings. Coupled with a high contrast ratio of 2500:1, the XG-C60X provides deep blacks and bright whites, enhancing overall image clarity and detail.

The XG-C60X utilizes DLP (Digital Light Processing) technology, which offers remarkable color accuracy and consistency. This ensures that colors remain true to life, providing a superior viewing experience. The projector supports a native resolution of XGA (1024 x 768), making it suitable for displaying text-heavy content and detailed visuals. Additionally, it can handle various input resolutions, ensuring compatibility with different video sources.

Another notable feature of the XG-C60X is its extensive connectivity options. It includes multiple inputs such as HDMI, VGA, S-Video, and composite video, allowing users to connect a wide range of devices, from computers and laptops to DVD players and gaming consoles. This versatility makes it easy to integrate the projector into existing setups and adapt to various presentation needs.

Portability is further enhanced by the projector's lightweight design. Weighing in at just a few pounds, it can be easily transported between locations, making it an excellent choice for traveling professionals. The built-in speaker adds an extra level of convenience for presentations, eliminating the need for external audio equipment in smaller settings.

The XG-C60X also features eco-friendly technologies, including a long lamp life of up to 4000 hours in eco mode. This not only reduces maintenance costs but also minimizes environmental impact. The easy-to-use control panel and remote enhance user convenience, providing quick access to essential functions and settings.

In summary, the Sharp XG-C60X stands out as a powerful and flexible projector, combining excellent brightness, connectivity options, and portability. Whether for business use, educational purposes, or home entertainment, it meets a variety of projection needs with high-quality performance and user-friendly features.
Top Page Image Contents