Sharp XG-C60X Displaying the Remaining Lamp Life Percentage, Auto Power Off Function

Page 74

Selecting the Economy Mode

Auto Power Off Function

When no input signal is detected for more than 15 minutes, the projector will automatically enter the standby mode if set to “ON”.

The Auto Power Off function will be disabled when it has been set to “OFF”.

Select “Auto Power Off” in “Economy Mode” under the “Options (1)” menu on the menu screen.

➝For operating the menu screen, see pages 42 to 45.

Note

•When the Auto Power Off function is set to “ON”, 5 minutes before the projector enters the standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes.

Displaying the Remaining Lamp Life (Percentage)

Checking the Remaining Lamp Life (Percentage)

This function allows you to check the remain- ing lamp life (percentage).

Select the “Options (2)” menu on the menu screen.

➝For operating the menu screen, see pages 42 to 45.

Note

•It is recommended that the lamp be changed when the remaining lamp life becomes 5%.

For lamp replacement, contact your nearest Sharp Authorized Projector Dealer or Service Center.

•The table at the right indicates rough esti- mates in the case of using only in each mode shown. Remaining lamp life changes within the range of the values shown depending on the frequency at which “Power Save” is switched “ON” and “OFF” (see page 69).

-70

Remaining Lamp Life (Percentage)

 

Remaining lamp life

 

100%

5%

Used with only “ON”

3,000 hours

150 hours

on “Power Save”

(Low power mode)

 

 

Used with only “OFF”

 

 

on “Power Save”

2,000 hours

100 hours

(Standard mode)

 

 

XG-C60X_E_PDF_p67_70.p65

70

03.8.28, 2:27 PM

Page 73 Page 75
Image 74
Page 73 Page 75
Contents XG-C60X Model No. XG-C60X Serial No Special Note for Users in the U.K 03.8.28, 155 PM Introduction When Attaching the Quick Guide Label Product DisposalNoise Reduction Outstanding FeaturesColor Management System New Edge Up-ScalingContents Appendix Power Sources CleaningAccessories Power-Cord ProtectionSafety Check Damage Requiring ServiceReplacement Parts Wall or Ceiling MountingTemperature monitor function Avoid locations with high or low temperatureUsing the projector in other countries Rest your eyes occasionallyFor Windows To install Acrobat Reader from the CD-ROMFor other operating systems For other languages For MacintoshPart Names Projector Front and Top ViewUsing the Kensington Lock Projector Rear ViewPart Names Remote Control Front ViewRemote Control Top View When using the remote control Using the Remote ControlAvailable Range of the Remote Control Inserting the BatteriesOptional cable AccessoriesSupplied accessories Connections and Setup This projector can be connected to Connecting the Projector to Other DevicesBefore Connecting An audio cable commercially available SeeConnecting the Power Cord Connecting to a Computer Using the RGB CableConnecting the thumbscrew cables Ferrite coreConnecting to Video Equipment Connecting to Component Video Equipment Connecting to an Amplifier Connecting to an Amplifier or Other Audio ComponentsControlling the Projector by a Computer Connecting the Remote Control to the Projector Watching Images on Both the Projector and a MonitorButton Using the Wireless Pre- sentation FunctionPress or while using presentation software on your computer Setup Using the Adjustment FeetOut Zoom Adjusting the LensFocus ring Zoom knob Setting up the Screen Throw DistanceScreen Size and Projection Distance Normal ModeStretch Mode AN-C41MZ Optional accessory Throw ratio 14.1 to AN-C27MZ Optional accessory Throw ratio 12.7 to AN-C12MZ Optional accessory Throw ratio 11.18 to Projecting a Reversed/Inverted Image Projection from behind the screenBasic Operation Press on the projector or on the remote control Basic ProcedurePlug the power cord into the wall outlet Image ProjectionInput buttons Volume buttons Press , , or on the remote control to select the Input modePress or on the remote control to adjust the volume Press Selecting the On-screen Display LanguagePress to temporarily turn off the sound Menu button Buttons Mute button Turning the Power offPress Standby on the projector Standby button Enter buttonCorrecting Trapezoidal Distortion Press , , \ and to adjust the Keystone correctionCorrecting Trapezoidal Distortion Keystone Correction Keystone button Enter button Undo button ButtonsDigital Shift Setting Menu Bar Items Sub menuInput 3 / 4 Mode Main menu Sub menuMenu Bar Main Menu Enter button Buttons Menu button Using the Menu ScreenMenu Selections Adjustments Press \or to adjust the item selected Press \ or to select the menu you want to adjustPress or to select the item you want to adjust Enter button Buttons Menu button Menu Selections SettingsPress or to select the item you want to set Cursor shifts to the sub menu Selecting the Signal Type Adjusting the PictureAdjusting Image Preferences Progressive Mode Saving Adjustment Settings Adjusting Computer ImagesComputer Image Adjustment Checking the Input Signal Selecting Adjustment SettingsSpecial Mode Settings Manual adjustments should be per- formed Auto Sync AdjustmentWhen setting to Normal or High Speed Auto Sync Display FunctionEasy to Use Functions Resize button Screen display of the picture display mode Selecting the Picture Display ModeSwitching the Picture Display Using Different Input Signals Video Freeze button Displaying a Still ImageFreezing a Moving Image Buttons Enlarge Enlarge/ Reduce buttons Enlarging a Specific Portion of an ImageDisplaying an Enlarged Portion of an Image Adjusting Gamma Correction Gamma Correction FunctionPress to move the inset pic- ture Displaying Dual Pictures Pict in PictDisplaying the Inset Picture To return to the original projected image, press again Black Screen FunctionBlacking out the Pro- jected Image This function can be used to display a black screenPress to cancel the break timer Displaying the Break TimerDisplaying and Setting the Break Timer Buttons Break Timer buttonSelecting the Color Reproduction Mode Selecting the Target ColorSetting the Hue of the Target Color Setting the Brightness of the Target ColorSetting the Chromatic Value of the Target Color Resetting User-Defined Color Settings Overview of All Color SettingsSetting the Audio Out- put Type Setting the Audio Output TypeSetting on/off the Internal Speaker Setting on/off the Inter- nal SpeakerUsing Auto Search Auto Search FunctionReducing Image Noise Setting On-screen DisplayVideo Digital Noise Reduction DNR System Turning Off On-screen DisplaySetting the Video System Setting the Video SystemDeleting the Captured Image Saving Projected ImagesCapturing the Image Selecting a Background Image Setting a Background ImageSelecting a Startup Image Selecting a Startup ImageMonitor Out/RS-232C Off Function Selecting the Economy ModeSetting the Power Save Mode Displaying the Remaining Lamp Life Percentage Auto Power Off FunctionSelecting the Economy Mode Checking the Remaining Lamp Life PercentageReversing/Inverting Projected Images Setting the Projection ModeSetting up the Keylock Locking the Operation Buttons on the ProjectorSelecting the Transmis- sion Speed RS-232C Canceling the Keylock SettingSelecting the Transmission Speed RS-232C Setting up a Password Entering the PasswordChanging the Password If You Forget Your PasswordSetting the Anti-Theft Entering the KeycodeChanging the Keycode Enter the same 4-digit keycode in ReconfirmInitializing the Settings Returning to Default SettingsDisplaying the Adjustment Settings Overview of All Menu SettingsAppendix Cleaning the lens MaintenanceCleaning the projector Cleaning the exhaust and intake ventsReplacing the Air Filter Cleaning and replacing the bottom air filterDisconnect the power cord Remove the bottom filter coverReplace the filter cover Clean the air filterReplace the air filter About the lamp indicator Maintenance IndicatorsAbout the temperature warning indicator Maintenance Indicators Replacing the Lamp Regarding the LampLamp Change the air filter Removing and Install- ing the Lamp UnitAC socket User service screw Remove the lamp unit coverResetting the Lamp Timer Connecting Pin Assignments RGB Input Component InputPC control RS-232C Specifications and Command SettingsCommands Communication conditionsRS-232C Specifications and Command Settings Options Control Contents Sharp remote control signal format Wired Remote Control Terminal SpecificationsSpecifications of wired remote control input Function and transmission codesComputer Compatibility Chart VGATroubleshooting Sxga For Sharp Assistance Specifications Ntsc 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAMDimensions Units inches mmGlossary Advanced intelligent compressionIndex 100101 Sharp Corporation

XG-C60X specifications

The Sharp XG-C60X is an advanced DLP projector renowned for its vivid image quality and versatile functionality, making it an ideal choice for various applications, including business presentations, educational environments, and home cinema setups. This projector features a compact design, allowing for easy portability while still delivering exceptional performance.

One of the main highlights of the Sharp XG-C60X is its bright 3000 ANSI lumens brightness. This high brightness level ensures clear and vibrant images even in well-lit rooms, reducing the need to dim lights during presentations or movie screenings. Coupled with a high contrast ratio of 2500:1, the XG-C60X provides deep blacks and bright whites, enhancing overall image clarity and detail.

The XG-C60X utilizes DLP (Digital Light Processing) technology, which offers remarkable color accuracy and consistency. This ensures that colors remain true to life, providing a superior viewing experience. The projector supports a native resolution of XGA (1024 x 768), making it suitable for displaying text-heavy content and detailed visuals. Additionally, it can handle various input resolutions, ensuring compatibility with different video sources.

Another notable feature of the XG-C60X is its extensive connectivity options. It includes multiple inputs such as HDMI, VGA, S-Video, and composite video, allowing users to connect a wide range of devices, from computers and laptops to DVD players and gaming consoles. This versatility makes it easy to integrate the projector into existing setups and adapt to various presentation needs.

Portability is further enhanced by the projector's lightweight design. Weighing in at just a few pounds, it can be easily transported between locations, making it an excellent choice for traveling professionals. The built-in speaker adds an extra level of convenience for presentations, eliminating the need for external audio equipment in smaller settings.

The XG-C60X also features eco-friendly technologies, including a long lamp life of up to 4000 hours in eco mode. This not only reduces maintenance costs but also minimizes environmental impact. The easy-to-use control panel and remote enhance user convenience, providing quick access to essential functions and settings.

In summary, the Sharp XG-C60X stands out as a powerful and flexible projector, combining excellent brightness, connectivity options, and portability. Whether for business use, educational purposes, or home entertainment, it meets a variety of projection needs with high-quality performance and user-friendly features.
Top Page Image Contents