Rear Panel

			Serial No
Runco International
	Union City, CA
	OUTPUTS		Model
	OUTPUTS
Pr	Y	Pb
R	G	B
			Video Processor / Controller
H	V	H/V	DVI Out

				5	6	11			13
		INPUTS					SYSTEM CONTROL INTERFACE
Pr	Y	Pb
R	G	B	H	V
							TRIGGERS
				HD1
						1	2	3	IR
				HD2
R	G	B	H	V
Pr	Y	Pb
			SDI	Pb	Pr	Y	S-Video 1
				Pb	Pr	Y	S-Video 1
	DVI 1	DVI 2	Option	Component Video		Video	S-Video 2	RS-232 Out	RS-232 Control

CAUTION	!
RISK OF ELECTRIC SHOCK
DO NOT OPEN

AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE CENTER.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

100-230VAC 50-60 Hz, 165 Watts Max

Made In USA

OUTPUTS:

1.ANALOG OUTPUTS (BNC Connectors)

The various output lines used to drive the analog input of the display device. Individually, the jacks are: V=vertical sync, H=horizontal sync, B=Blue, G=Green, R=Red. Connect these to the corre- sponding projector inputs.

NOTE: If DVI input is used with HDCP content, RGBHV output is automatically disabled. This is in compliance with HDCP regulations. To switch to DVI output see ‘Projector Configuration’ on page 15.

2.DVI OUT

The DVI digital link used to drive the digital input of an HDCP compliant display device. Connect to the projector’s DVI inputs.

INPUTS:

3.DVI 1 (Digital)

DVI input #1, HDCP compliant.

4.DVI 2 (Digital)

DVI input #2, HDCP compliant.

5.HD 1 (Analog BNC connectors)

High Definition input #1, can be RGB(HV) or YPrPb, 480i, 480P, 720P or 1080i.

6.HD 2 (Analog BNC connectors)

High Definition input #1, can be RGB(HV) or YPrPb, 480i, 480P, 720P or 1080i.

7.COMPONENT INPUT (RCA connectors) Standard Definition (480i/576i) Component (YPrPb) input. This is the input for component video from sources such as DVD players. (For best results do not run DVD player in progressive mode).

8.COMPOSITE INPUT (RCA connector)

This is the input for Composite Video input from sources such as Laser disc players,

VCRs and other miscellaneous video sources.

9.S-VIDEO 1 INPUT

This is the input for S-video #1 from sources such as Satellite receivers, S-VHS VCR’s and DVD players.

10.S-VIDEO 2 INPUT

This is the input for S-video #2 from sources such as Satellite receivers, S-VHS VCR’s and DVD players.

11.TRIGGERS 1/2/3 (Outputs)

Connection for 3 different 12V trigger controlled devices.

12.RS-232 OUT (RJ-11 Connector)

Comlink connection to VX-1000d projector.

13.IR

Wired input from an external remote control.

14.RS-232 CONTROL

Connection for an external RS-232 controller device to place the DHD under system automation control.

15.POWER INPUT (100-230v) Plug in main power here.

16.MAINS FUSE

This is the main AC input fuse. (Main Fuse: 5mm x 20mm, 500mA, 250V, Slow Blow)

17.MAIN POWER SWITCH

Disconnects or applies main power to the processor.