Runco VX-1000d manual RS-232 Communications, General Information

Page 24

RS-232 Communications

General Information

Baud rate: 19200 (fixed)

Bits: 8

No Parity

All protocol in ASCII format

RS-232 input connector pin numbers: TxD= Pin# 2, RxD= Pin# 3, GnD= Pin# 5

Command format (single command): command value (i.e. brightness 100).

NOTE: A space (not an underscore) or comma may be used between the command and its value.

Command string format: command,command value, command etc. (i.e. COMPOSITE,BRIGHTNESS 100,ANAMORPHIC,<CR>)

NOTE: In between commands, a comma or space may be used

NOTE: A carriage return must be used after each command or string.

Other notes:

For command strings, a maximum of 255 characters can be used in a single string.

PARAMETER min/max refers to a function's minimum and maximum value range. Inputting values above or below their range may cause unpredictable (but not fatal) results.

23

Image 24
Contents VX-1000d Projector Table of Contents Page Features IntroductionProduct Disposal Information Intellectual Property Rights Read Before Using the Product Declaration of ConformityLimited Warranty Limited WarrantyEffective Warranty Date Features and Benefits Projector Description Top ViewInput Panel Projector Placement and Offset Information Ceiling Mount ConfigurationFloor Mount Configuration Vertical OffsetDHD Controller Description Front PanelRear Panel Remote Control Description Quick Set-up Guide Connection ExamplesAnalog Inputs Projector Configuration Digital InputsOverall Functional Description Menu Description and Navigation Main MenuAspect Ratio White Yellow Cyan Green Magenta Red Blue Input Position Basic Troubleshooting Tips Problem Possible Cause SolutionImage appears too RS-232 Communications General InformationRS-232 Commands DescriptionBrightness Specifications VX-1000d ProjectorSupplied Accessories DHD ControllerRUMA-010825 Rev 9-20-04 ver