Remote Control Description

(1)ON/OFF

Switches Power ON/OFF. (This does not operate when POWER/STANDBY indicator of the main unit is off.)

(2)IR OUTPUT INDICATOR

Illuminates when a button in pressed, indicating that an IR signal is being transmitted.

(3)ENTER BUTTON

When an item is highlighted on a menu, pressing ENTER will select that item.

(4)CURSOR (S / T / W / X)

Use these buttons to select items or settings and to adjust settings or switch the display patterns.

UP Button: When no menus are present on-screen, the UP button will toggle through

aspect ratios in the following order: (RATIO)

Anamorphic		Standard (4:3)		Letterbox		VirtualWide

LEFT Button: When no menus are present on-screen, the LEFT button will toggle

through the different sources in the following order: (INPUT)

HD Pass Thru 2

HD Pass Thru1

DVI 2

DVI 1

HD/RGB2

HD/RGB 1

Component SD

S-Video 2

S-Video 1

Composite

DOWN Button: When no menus are present on-screen, the RIGHT button will toggle

through the different sources in the following order: (RATIO)

VirtualWide		Letterbox		Standard (4:3)		Anamorphic

RIGHT Button: When no menus are present on-screen, the RIGHT button will toggle

through the different sources in the following order: (INPUT)

Composite

S-Video 1

S-Video 2

Component SD

HD/RGB 1

HD/RGB 2

DVI 1

DVI 2

HD Pass Thru 1

HD Pass Thru 2

(5)LIGHT BUTTON

Press this to illuminate the buttons.

(6)MENU BUTTON

Pressing this button will access the OSD controls. Press this button during the display of the sub-menu to return to the previous menu.

(7)VIDEO BUTTON

Press this button to select VIDEO (composite video) as the source.

(8)COMP BUTTON

Press this button to select Component SD (480i/576i) input.

(9)DIRECT ACCESS BUTTONS

These red buttons to the right hand-side will allow you direct access to an aspect ratio, or selection of a number in

certain cases. These buttons are:
ANA - selects Anamorphic aspect ratio	LETBOX - selects Letterbox aspect ratio
4x3 - selects Standard 4:3 aspect ratio	V-WIDE - selects VirtualWide aspect ratio

(10)S-VID 1 and S-VID 2 BUTTONS

Press this button to select between S-Video 1 and S-Video 2 inputs.

(11)HD1 and HD2 BUTTONS

Press this button to select between HD1 (High Definition) signal and HD2 signal inputs. Auto detect component input, YPbPr or RGBHV.

(12)DVI 1 and DVI 2 BUTTONS

Press this button to select between DVI1 signal and DVI2 signal input.