Runco Vision 85 manual Press Menu to exit test pattern mode, Service

Page 59

Operation

•Vidikron/ISF Logo Splash Screen Timers: When you turn on the Vision 85, it projects a welcome screen with the Vidikron logo followed by one with the ISF logo. Select Splash Timer from the Splash Configure menu to set the amount of time that these two images appear. The range is from 2 to 60 seconds, in one-second increments.

Use the up or down cursor button to select a timer value to adjust. Use the right or left cursor button to change the timer value. Press MENU when you have finished configuring both timers.

OSD Position: Select OSD Position, press ENTER and use the arrow buttons to change the size and position of the OSD controls.

Use the Service menu to access advanced projector configuration settings. This menu should be used by ISF-certified technicians only.

You must enter a passcode to access the Service menu.

Note

Test Video: Select Test Video from the Service Menu to access the internal test patterns on the Vision 85. Four patterns are available, consisting of white/gray or colored bars.

Press MENU to exit test pattern mode.

Input Names: You can give each VHD Controller input a descriptive name. For example, you may want to change the default input name to the type of source component connected to it: “VCR,” “DVD,” “Laptop” et cetera. Composite, S-Video and Component SD input names can be up to 12 characters long; the others can be up to eight characters long.

To edit an input name, select Input Names from the Service menu. Press or to select an input and press ENTER. Use the or buttons to change a character; press or to select a character to change. When you have finished editing the input name, press MENU.

To restore the default input name, press repeatedly to highlight that input name in the “Restore” column. Then, press ENTER.

To save input names so that they can be restored after a System Reset (described on page 50), press repeatedly to highlight “Save.” Then, press ENTER.

The button takes you from top to bottom in the left column, then from

Note top to bottom in the right column. To highlight “Save,” scroll through both columns.

Service

Service

Test Video

Input Names

Remote Control

Analog Out Mode

Display Device

HD Format

Triggers

Miscellaneous

System Reset

Restore Saved Settings

Input Names

 

 

Restore

 

 

 

Composite

 

Composite

S Video 1

 

S Video 1

S Video 2

 

S Video 2

Component SD

 

Component SD

HD/RGB 1

 

HD/RGB 1

HD/RGB 2

 

HD/RGB 2

HDMI 1

 

HDMI 1

HDMI 2

 

HDMI 2

 

Save

Vidikron Vision 85 Owner’s Operating Manual

47

Page 58 Page 60
Image 59
Page 58 Page 60
Contents 1080p DLP Projectors Page For Projectors, Video Processors and Controllers TWO Year Limited WarrantyEffective Warranty Date Vidikron Safety Precautions 1Table of Contents Operation Table of ContentsSerial Communications Maintenance and TroubleshootingSpecifications Table of Contents VHD Controller OSD Menu Structure for Vision 1List of FiguresList of Figures Xii This Manual 1IntroductionAbout This Manual If you need Turn to Using This ManualThey also provide supplemental information Performance or cause a malfunctionDescription, Features and Benefits Optional Accessories Vision 85 at a Glance Controls and FunctionsVertical Lens Shift Vision 85 Rear Panel Wired IR 3.5-mm, mini phono jackRS-232C Input RJ-11 female connector VHD Controller Front Panel VHD Controller Front PanelInputs Component Video RCA connectorsVHD Controller Rear Panel Hdmi 1 / Hdmi 2 DigitalComLink RS-232 Output Power Input 100 to 240 VACVideo 1 / S-VIDEO Volt 750 mA Trigger OutputsVHD Controller/Vision 85 Remote Control Vision 85 Remote Control UnitCursor Buttons On / OFFENT Enter VID 1 2 / S-VID 2 5 S-Video Memory Preset Buttons ISF NT NightCust VideoNot used Vision 85 Built-In KeypadOperation 3InstallationRemote Control To install batteries in the remote controlInstallation Signals Quick SetupInstallation Overview Step Procedure For Details, Refer toAdvantages Considerations Installation ConsiderationsProjector Installation Options Installation TypeThrow Distance Position Ceiling InstallationFloor Installation Folded Optics Ceiling Mounting Inverted Adjusting the ProjectionMounting the Vision Floor Mounting UprightVHD Controller Connector Panel AccessConnections to the Vision 85 and VHD Controller Hdmi Source HD-DVD/BD/DVD Player or HD Tuner with Connecting SourceController Hdmi Connections See FigureDigital DTV RGB or Component Video Connections Digital DTV RGB or Component Video Connections See FigurePersonal Computer Analog Computer RGB Connections See FigureDVD Player, VCR Satellite Receiver Laser Disc etc Composite/S-Video/Component Video Connections See FigureEquipment Connecting a PC orOutputs to External 13 -volt Trigger Output Connection from Projector Connecting an External IR Receiver to the VHD ControllerAdjusting the Picture Orientation Turning on the Power15. Vertical and Horizontal Lens Shift Adjustments Primary Lens AdjustmentsInstalling and Adjusting the CineWide Anamorphic Lens Adjusting the Lens Height Y Anamorphic Lens Top View 4Operation Using the On-Screen MenusAspect Ratio ISF PresetsService Input SourceAspect Ratio Main MenuInput Source Aspect Ratio Description Aspect Ratio SettingsSurface, eliminating the black bars. PictureTypical Pluge Pattern for Adjusting Brightness Perform the adjustments in the order listed hereGray Yellow Cyan Green Magenta Red Blue Gray Yellow Cyan Green Magenta Red Blue Input Position Typical Test Pattern for Adjusting SharpnessInformation ISF PresetsCalibration You must enter a passcode to access the Calibration menuGain/Offset Refer to ISF Night Display Color, above Service Press Menu to exit test pattern modeCode HD/RGB 1 and HD/RGB 2 Color Space Select Auto, RGB or YUV Standard VisionOperation On-Screen Menus for 1080i Digital or 1080p Signals Vision 85 Main Menu 1080i Digital or 1080p Sources Only Key Picture AdjustColor Temp VAC Iris Lamp Power LanguageISF Night Picture Adjust Advanced Effects of Primary Color Hue AdjustmentsWhite Balance Options HD/RGB AdjLamp Hours read-onlyRefer to Lamp Hours on Always set this option to On. Doing otherwise may disrupt Language setting Orientation Refer to Adjusting the Picture Orientation onOperation Lamp Replacement 5Maintenance and TroubleshootingSymptom Possible Causes Solution Troubleshooting TipsTroubleshooting Chart To Table Maintenance and Troubleshooting 6Serial Communications Serial Command SyntaxRS-232 Connection and Port Configuration Serial CommandsValue Description Min/max Stored? CommandBrightness Command Parameter Value Description Min/max Stored? Bkgnd Enter key Value Stored? DescriptionVision 85 Specifications 7SpecificationsDimensions Home Theater Calibration SpecificationsIndustry-Standard Specifications Power RequirementsVHD Controller Specifications Vision 85 Dimensions Vision 85 DimensionsPage Vidikron
Top Page Image Contents