Runco VX-22D manual Mounting the VX-22d

Installation

There are several methods for mounting the projector. Depending on your chosen installation, one method may be more suitable than another.

In typical front and rear screen installations, the projector can be mounted to a secure and level surface such as a table or cart. Carts are useful when moving a projector during a presentation or from site to site. If possible, lock the wheels when it’s in position to prevent it from being moved during a presentation.

3.6

Mounting the VX-22d

Floor Mounting (Upright)

For fixed installations, and for those that want the projector out of sight or have a limited		Ceiling Mounting
space for projector and audience, you can invert the VX-22d and suspend it from the		(Inverted)
ceiling using a specially-designed ceiling mount fixture.
Note	Use only the Runco-approved ceiling mount kit designed for your
	projector. Install the mount kit according to the instructions
	provided with it.
The projector can also be inverted and placed in an enclosure above and behind the
viewing area. Install four feet on the inside bottom surface of the enclosure on which the
projector can rest. A variety of materials can be used for this purpose (for example, rubber
crutch tips or turntable feet).
If the VX-22d is ceiling-mounted and the screen is significantly lower than the projector,		Adjusting the Projection
you can tilt the projector at a slight angle by adjusting the ceiling mount.		Angle

If you do this, you may need to shift the image using the on-screen display (OSD) controls, to compensate. For detailed instructions, refer to Using the On-Screen Menus on page 45.

Use only the Runco-approved ceiling mount kit designed for your

Note projector.

Runco VX-22d Owner’s Operating Manual 27