Runco VX-6000D operation manual DHD Controller Front Panel

Controls and Functions

2.3

DHD Controller Front Panel

Figure 2-3shows the controls and indicators on the DHD Controller front panel; the paragraphs that follow describe them.

3

VX-2000/6000 HDMI 1

16:91080i/60

11 10 9

	ra tio
standby	nt	er
i
	e
n
p
u
t

i n p u t

m

e n u

r

atio

1 2 3 4 5 6 7 8

Figure 2-3. DHD Controller Front Panel

1.RUNCO ICON

Lights blue to indicate that the controller is on or powering up.

2.IR SENSOR

Receives IR commands from the remote control.

3.VACUUM FLUORESCENT DISPLAY

Can be used instead of the On-Screen Display (OSD). Displays currently-selected menu or – if no menu is selected – the connected display device model, current source, input resolution and aspect ratio.

4.ON/STANDBY BUTTON

Press once to toggle from standby mode to on mode. Press it again to return to standby mode. For a discrete on or off command, you can use the direct access buttons on the remote control.

5.LEFT BUTTON

Used to direct-select inputs or move the menu cursor left in the OSD. When no menu is present on-screen, the LEFT button toggles through the different sources, in this order:

HDMI 2 - HDMI 1 - SCART - HD 2 - HD 1 - Component - S-Video 2 - S-Video 1 - Composite Video

6.DOWN BUTTON

Use to direct-select aspect ratios or move the menu cursor down in the OSD. When no menu is present on-screen, this button toggles through the different aspect ratios, in this order:

16:9 - 4:3 - Letterbox - VirtualWide - Cinema - Virtual Cinema - Native

8 Runco VX-6000d Installation/Operation Manual