Runco VX-6000D Information, Calibration, Should be used by ISF-certified technicians only

Page 80

Operation

Information

Information

Signal

System

Field Service

Manufacturing

To reset the Custom or THX memory preset to its factory-default state, select it, press or to highlight Reset and press ENTER.

Signal / System: Select Information from the Main Menu, then choose either Signal or System to display information about the current input signal (resolution, frequency, type et cetera) and installed firmware versions, as well as other information that uniquely identifies your DHD Controller and display device.

Should you ever need to contact Runco Technical Support, this information will help them answer your questions or resolve product performance issues.

Signal

 

Input Source

HDMI 1

Signal Format

1080p/60

Input Resolution

1920x1080

Vertical Freq

59.94 Hz

Horizontal Freq

67.500 kHz

Pixel Clock

148.500 MHz

Color Space

REC709

Sync Type

Separate

Memory Preset

ISF Night

 

 

System

Model

DHD3

Display Name

VX-6000d

Output Resolution

1920x1080

Serial Number

00000000

Boot Version

3.0

Firmware Version

3.4

Micro Version

3.3

 

 

Calibration

Calibration

ISF Settings

Display Color

Input Image

Input Color

Save ISF Night

Save ISF Day

Copy/Paste

Output Shift

Splash Configure

OSD Position

Field Service / Manufacturing: The Field Service and Manufacturing menus are password-protected and intended for use only by Runco service personnel and factory technicians.

Use the Calibration menu to perform advanced picture quality adjustments. This menu

should be used by ISF-certified technicians only.

Note

You must enter a passcode to access the Calibration menu for the

first time after turning on the system.

To recall the ISF Night or ISF Day settings, select “ISF Night” or “ISF Day” from the Memory Presets menu (see page 63) or use the corresponding remote control buttons.

Display Color: Use the Display Color settings to adjust the color balance at the DHD Controller output. These settings are saved independently for each input and display mode.

Gain: Use the Gain controls to correct color imbalances in the bright areas of the image. A good way to do this is to use a test pattern consisting mostly of solid white areas, such as an 80 IRE “window” pattern. If the white areas contain traces of red (Pr), green (Y) or blue (Pr), decrease the Gain for that color.

Offset: Use the Offset controls to correct color imbalances in the dark areas of the image. A good way to do this is to use a test pattern consisting mostly of dark gray areas, such as a 30 IRE “window” pattern. If the gray areas contain traces of red (Pr), green (Y) or blue (Pr), decrease the Offset for that color.

64

Runco VX-6000d Installation/Operation Manual

Image 80
Contents VX-6000d VX-6000d VX-6000d/CineWide VX-6000d/CineWide with AutoScopePage RuncoCare Standard Two Year Limited Warranty RuncoCare Standard FeaturesRuncoCare Claim Procedure Page Copyright and Trademarks Important Safety Instructions Compliance Information Declaration of ConformityFCC Part Page Table of Contents Ceiling Mounting Inverted Maintenance and Troubleshooting SpecificationsOperation External ControlTable of Contents Xiv List of Figures Xvi Introduction About This ManualUsing This Manual If you need Turn toDescription, Features and Benefits Format screenOptional Accessories Controls and Functions VX-6000d at a GlanceVertical Lens Shift RS-232C RJ-11 female connector VX-6000d Rear PanelDHD Controller Front Panel DHD Controller Front PanelDisplay Control DHD Controller RearPanel Inputs 4. USB VX-6000d Remote Control Units Standard DHD Remote ControlComp Component On / OFFCursor Buttons Memory Preset Buttons Aspect Ratio Selection Buttons169 Letbox LetterboxVX6K Setup Remote Control FunctionsControls and Functions Installation Remote ControlBattery Installation Setup Remote Standard DHD RemoteOperation Other surfacesStep Procedure For Details, Refer to Quick SetupInstallation Overview Installation Projector Installation OptionsInstallation Type ConsiderationsVX-6000d Lens Options and Throw Ratios Throw DistanceCeiling Installation Floor InstallationVertical and Horizontal PositionHorizontal Lens Shift Example Only Vertical and Horizontal Lens Shift Limits Synchronization Issues Possible Audio Latency for Various Input/Output TimingsFolded Optics Audio/VideoInstalling the Optional CineWide Lens Mount Other Considerations7shows the VX-6000d/CineWide with AutoScope motor assembly VX-6000d with Ceiling Mount Adapters/Projector Stands AutoScope Lens Motor Installation CineWide Base Plate VX-6000d/CineWideMounting the VX-6000d Connections to the VX-6000d and DHD Controller10. Connecting the VX-6000d to the DHD Controller Connecting Source Components to the DHDHdmi Source Connections See Figure Controller12. Component Video Source Connections DTV-Set-Top BoxComputer RGB Camcorder 13. Rgbhv Source ConnectionsGaming Console 14. Scart Rgbs Source ConnectionsComposite and S-Video Source Connections CamcorderRS-232 Controller ConnectionConnecting 12-volt Trigger Outputs to External Equipment AutoScope Lens Motor18 -volt Trigger Output Connection from Projector Connecting an External IR Receiver to the DHD Controller 19. External IR Receiver ConnectionTurning on the Power HdmiPrimary Lens Adjustments Focus Zoom Iris Vertical and Horizontal Lens ShiftAdjusting the Picture Orientation Vertical HorizontalInstalling and Adjusting the CineWide Anamorphic Lens It is extremely important that the primary lens is properly22. Attaching the Anamorphic Lens to the Lens Adapter Ring Select Triggers from the Service menu Adjusting the Horizontal X Lens PositionInstallation Adjusting the Geometry Anamorphic Lens Top ViewInstallation Using the On-Screen Menus OperationRunco Video ServiceMain Menu Input Source Aspect RatioInput Source Aspect RatioAspect Ratio Settings Remote Aspect Ratio Control Description Button 169Select 169 to view 169 DVDs Hdtv programs in theirRemote Aspect Ratio Control Description Button OverscanPicture PictureTypical Gray Bar Pattern for Adjusting Contrast Gray Yellow Cyan Green Magenta Red Blue Gray Yellow Cyan Green Magenta Red Blue Typical Test Pattern for Adjusting Sharpness Input Position Input PositionAdjust the Phase after adjusting Tracking see below Memory Presets Memory PresetsShould be used by ISF-certified technicians only InformationCalibration CIE 1931 Chromaticity Diagram Color Temperature Presets and Associated Color Points Color Temperature Preset Associated x/y ValuesCopied settings are not retained after a power cycle Copy/PasteInput Names ServiceService Exit Operation Operation 63 and ISF Day/Night Memory Presets Maintenance and Troubleshooting Lamp ReplacementLens Replacement Only trained, authorized Runco dealers should attempt toMaintenance and Troubleshooting Symptom Possible Causes Solution Troubleshooting TipsTroubleshooting Chart Troubleshooting Chart Maintenance and Troubleshooting Port Configuration Serial Command SyntaxExternal Control Serial CommunicationsSerial Commands Input Selection CommandsPicture Adjust Commands Input Position Commands Output Shift CommandsEnter key Exit Return keyWith Toggle Bit = Hex Binary Function Start Using Discrete IR CodesCommand Bits IR Command List Remote Control With Toggle Description Button Name Bit =RC5 Control Codes for the DHD Controller RC5 DataEnter VX-6000d Specifications SpecificationsVX-6000d Specifications Home Theater Calibration Specifications Industry-Standard SpecificationsPower Requirements DimensionsDHD Controller Specifications DHD Controller SpecificationsVX-6000d Dimensions VX-6000d/CineWide Dimensions with Optional Ceiling MountSupported Signal Timings by Input Format Resolution Frequency Rate Hz MHz KHzSupported Timings Supported? √ = Yes, = NoPAL-B/G/H/I PAL-M Specifications Page 020-0769-02 Rev. B May
Related manuals
Manual 102 pages 53.58 Kb