Runco VX-6000D operation manual Memory Presets

Operation

For each input, the VX-6000d lets you save image quality settings as presets that you can recall at a later time. You can create up to four presets per input and display mode (resolution and frame rate).

The DHD Controller stores the following display modes in each memory preset:

•480i

•480p

•576i

•576p

•720p/24 Hz

•720p/25 Hz

•720p/30 Hz

•720p/50 Hz

•720p/60 Hz

•1080i/50 Hz

•1080i/50 Hz (Australia)

•1080i/60 Hz

•1080p/24 Hz

•1080p/25 Hz

•1080p/30 Hz

•1080p/50 Hz

•1080p/60 Hz

Use the Memory Presets menu to recall saved image presets, or to save image settings in the “Custom” or “THX” memory location. The currently-selected preset is indicated by a “➡” to its left; in the example shown here, ISF Night is selected.

You should save changes to any of the following settings to a preset; otherwise they will be lost when a new input source or resolution is selected:

•Brightness

•Contrast

•Color saturation

•Tint

•Sharpness

•Gamma

•Lamp Settings

•Color temperature and white balance

To select a memory preset, press or to highlight it and press ENTER.

To save the settings for the current input and display mode to the Custom or THX memory preset, select it, press or to highlight Save and press ENTER.

To save the settings for the current input and display mode to the

Note ISF Night or ISF Day memory preset, select Save ISF Night or Save ISF Day from the Calibration menu (refer to Save ISF Night/Save ISF Day on page 67).

Memory Presets

Memory Presets

➡ISF Night ISF Day

Custom Save Reset

THX Save Reset

Runco VX-6000d Installation/Operation Manual 63