Runco VX-6000D operation manual Input Position Commands, Output Shift Commands

External Control

Table 6-1. Serial Commands (continued)

Command	Parameter	Value	Description
	(min/max)	Stored?
	Image Preset Commands
CUSTOM1	NA	YES	Loads “Custom” image preset
CUSTOM2	NA	YES	Loads “THX” (“Custom 2”) image preset
DAY	NA	YES	Loads “ISF Day” image preset
NIGHT	NA	YES	Loads “ISF Night” image preset
PRESET?	NA	NA	Returns currently-selected preset
			(ISF Day, ISF Night, Custom or THX)
	Input Position Commands
IHEIGHT	0/20	YES	Sets the value for input height
IHEIGHT?	NA	NA	Returns input height value
IHPOS	-50/50	YES	Sets a value for horizontal input position
IHPOS?	NA	NA	Returns input horizontal position value
IVPOS	-50/50	YES	Sets a value for vertical input position
IVPOS?	NA	NA	Returns input vertical position value
IWIDTH	0/50	YES	Sets the value for input width
IWIDTH?	NA	NA	Returns input horizontal width value
OVERSCAN	0/20	YES	Sets the overscan percentage
OVERSCAN?	NA	NA	Returns overscan percentage
OVERSCANMODE	0/1	YES	Sets the overscan mode (0=zoom;
			1=crop)
OVERSCANMODE?	NA	NA	Returns the overscan mode (0=zoom;
			1=crop)
	Output Shift Commands
OHEIGHT	-50/50	YES	Sets the value for output height
OHEIGHT?	NA	NA	Returns output height value
OHPOS	-50/50	YES	Sets the value for output horizontal posi-
			tion
OHPOS?	NA	NA	Returns output horizontal position value
OVPOS	-50/50	YES	Sets the value for output vertical position
OVPOS?	NA	NA	Returns output vertical position value
OWIDTH	-50/50	YES	Sets the value for output width
OWIDTH?	NA	NA	Returns output horizontal width value

82 Runco VX-6000d Installation/Operation Manual