Sharp PG-D3550W, PG-D2870W, PG-D3050W appendix Freezing a Moving Image, Selecting the Picture Mode

Page 38

Operating with the Remote Control (Continued)

Auto Sync

 

Displaying an Enlarged

(Auto Sync Adjustment)

 

Portion of an Image

 

 

 

Auto Sync function works when detecting input signal after the projector turns on.

Press AUTO SYNC to manually adjust with Auto Sync function.

Note

•When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 45.)

Freezing a Moving Image

1 Press FREEZE.

• The projected image is frozen.

Graphs, tables and other portions of projected images can be enlarged. This is helpful when providing more detailed explanations.

1 Press MAGNIFY on the remote control.

•Enlarges the image.

•Pressing or MAGNIFY enlarges or reduces the projected image.

Note

Press .

⋅1 ⋅2 ⋅3 ⋅4

Press .

•You can change the location of the enlarged image using P, R, O and Q.

2 Press FREEZE again to return to the moving image from the currently connected device.

Selecting the Picture Mode

You can select the appropriate Picture mode for the projected image, such as movie or video game.

Press PICTURE MODE.

•When pressing PICTURE MODE, the Picture mode changes in the following order:

STANDARD PRESENTATION MOVIE GAME sRGB*

Note

• See page 42 for details on the Picture mode.

2 Press RETURN on the remote control to cancel the operation.

• The magnifi cation then returns to υ1.

Note

•The selectable magnifi cations differ depending on the input signal.

•In the following cases, the image will return to the normal size (υ1).

-When switching the Input mode.

-When RETURN has been pressed.

-When the input signal is changed.

-When the input signal resolution and refresh rate (vertical frequency) change.

-When the Resize mode is changed.

* “sRGB” is displayed only when RGB signal is input.

34

Page 37 Page 39
Image 38
Page 37 Page 39
Contents PG-D3550W PG-D3050W PG-D2870W PG-D3550W/PG-D3050WModel No Serial No Iii Page See bottom of projector Void the users authority to operate this equipmentInformation Product Disposal Using the Menu Screen For Future ReferenceContents Adjusting the Projector Function PRJ ADJ1/2 Menu ReferenceAccessories CleaningPower Sources Power-Cord ProtectionSafety Check Damage Requiring ServiceReplacement Parts OverloadingDo not block the exhaust and intake vents Avoid locations with extremes of temperatureRest your eyes occasionally Other connected equipment Using the projector in other countriesTemperature monitor function Closed Caption uses Bitstream Vera fontsFor Macintosh When you want to view the Setup ManualFor Windows Accessories Optional accessoriesPart Names and Functions PG-D2870WUsing the Kensington Lock Rear View TerminalsBreak Timer button For automatically adjusting images whenVOL +/- Volume buttons Picture Mode buttonUsable Range Remote control signal transmittersInserting the Batteries On the projector On the remote control Setup and ProjectionWhen connecting equipment other than a computer, see pages Easy StartTurn the computer on Turn the power off Setting Up the Projector Setting Up the ProjectorVideo Setup Standard Setup Front ProjectionScreen Lens center Signal Input Normal ModeScreen Size and Projection Distance Projection PRJ Mode Ceiling-Mount SetupConnecting the Projector to Other Equipment You may need other cables or connectors not listed belowConnecting the Projector to Other Equipment RGB Controlling the Projector by a Computer AC socket To AC outlet Power cord Supplied Connecting the Power CordWhen connecting to the LAN terminal using a LAN cable Turning the Projector On Power indicator Lamp indicatorTurning the Projector On/Off Standby button On buttonPress Enter to exit the Setup Guide screen About the Setup GuideAdjusting the Projected Image Adjusting the Focus Image ProjectionUse the rear adjustment foot to make the projector level Adjusting the HeightAdjusting the Picture Size except PG-D2870W Rotate the zoom ring to enlarge or shrink the picture sizeShrinks lower side Correcting Trapezoidal DistortionPress Keystone Input buttons AV Mute button VOL +/- Volume buttons Buttons Switching the Input ModeAdjusting the Volume On-screen displayResize Mode Press ResizeAbout Copyrights Using the Spot Function Operating with the Remote ControlDisplaying and Setting the Break Timer Switching the Eco+Quiet ModeSelecting the Picture Mode Freezing a Moving ImageWhen left-clicking Using the Remote Control as the Wireless Computer MouseWhen moving the cursor When right-clickingMenu Items Picture menuItem when selecting S-VIDEO or Video Network menu Press Menu Using the Menu ScreenMenu Selections Quick Start Menu ExampleMenu Selections Complete Menu Example Adjusting BrightQuick Start Menu Following items can be configured on the Quick Start MenuPress O or Q to adjust the item selected To adjust the projected image while watching itPress P or R and select Bright to adjust Press EnterMenu operation n Picture Adjustment Picture MenuSelecting the Picture Mode Adjusting the Colors Adjusting the ImageAdjusting the Color Temperature Adjusting Hue, Saturation, or ValueReducing Image Noise DNR Selecting the Film ModeEco+Quiet Signal Type Setting Signal Adjustment SIG-ADJ MenuResolution Setting Checking the Input Signal Setting the Video SystemSetting the Video Setup When reproducing Ntsc signals in PAL video equipmentAdjusting the Image Position Adjusting the Projected Image SCR-ADJ MenuSetting the Resize Mode Keystone CorrectionClosed Caption Setting the OverscanSetting the On-screen Display For Americas onlyReversing/Inverting Projected Images Selecting the Setup GuideSelecting the Background Image Selecting the Wall ColorSpeaker Setting Auto Sync Auto Sync AdjustmentAuto Power Off Function Auto Restart FunctionEnter the same keycode in Re- confirm Fan Mode SettingSystem Lock Function Selecting the Quick Start Menu Adjusting the Projector Function PRJ-ADJ1/2 MenuKeylock Function COMPUTER2 SelectStandby Audio Out Setting the Function Button OperationStandby Mode Checking the Lamp Life StatusEnter the same password in Reconfirm, then press Enter Setting a PasswordSelect Password, then press Enter or Q On the projector, pressReturning to Default Settings Network Dhcp Client SettingTCP/IP Setting Enter IP Address using P, R, Q and O, then press EnterYou can confirm the following items Setting Up the Projector Network Environment Network MenuConfirming the Projector Information Cleaning the lens MaintenanceCleaning the projector Cleaning the exhaust and intake ventsAbout the lamp indicator Maintenance IndicatorsAbout the temperature warning indicator Red on Abnormally high Are high Lower than 95F +35ºC Replacing the Lamp Regarding the LampLamp Lamp unit Removing and Installing the Lamp UnitRemove the lamp unit cover STANDBY/ON button AC socketResetting the Lamp Timer Open the cover of the storage case How to Use the Storage CaseStoring the Projector Place the projector into the storage caseCompatibility Chart ComputerTroubleshooting 21-2557, 58 Sharp Electronics Corporation Specifications Dimensions Index
Related manuals
Manual 26 pages 26.23 Kb

PG-D3550W, PG-D3050W, PG-D2870W specifications

The Sharp PG-D3550W, PG-D2870W, and PG-D3050W are advanced projectors designed to meet the demands of a variety of presentation and viewing environments. Each model is tailored to provide high-quality visual performance while incorporating innovative technology and user-friendly features.

The Sharp PG-D3550W is known for its impressive brightness of 3500 lumens, making it suitable for well-lit rooms. It supports a native resolution of 1280 x 800 pixels, delivering sharp and clear images that are ideal for professional presentations and educational settings. One of the standout features of this model is its extensive connectivity options, including HDMI, VGA, and USB inputs, allowing users to easily connect a wide range of devices. Additionally, the projector includes a 1.2x optical zoom lens, enabling flexible placement in various environments. The built-in speaker system further enhances presentations without the need for external audio equipment.

The PG-D2870W model shines with its optimized brightness of 2800 lumens, making it a robust choice for smaller conference rooms and classrooms. With a native resolution of 1280 x 800, this projector also guarantees high-quality images. It incorporates Sharp’s advanced color technology, which ensures vivid and accurate color reproduction. The PG-D2870W also features a user-friendly interface, allowing presenters to easily navigate settings and inputs. Its lightweight design and easy portability make it convenient for onsite presentations.

Lastly, the Sharp PG-D3050W is marked by its versatility and solid performance. With a brightness of 3000 lumens and a native resolution of 1280 x 800, it provides balanced performance across different lighting conditions. Users will appreciate its Quick Start feature, which allows for rapid power-up, reducing downtime before presentations. The projector comes equipped with dynamic contrast technology, enhancing image quality and depth. Its eco-friendly mode helps reduce energy consumption, making it a sustainable choice.

In summary, the Sharp PG-D3550W, PG-D2870W, and PG-D3050W projectors cater to a variety of professional and academic needs. Each model combines high brightness, versatile connectivity, and enhanced image quality, ensuring reliable performance and impressive visuals for any occasion. They exemplify Sharp's commitment to innovation and quality, making them essential tools for effective communication and engaging presentations.
Top Page Image Contents