Setting the Overscan, Closed Caption | Sharp PG-D3050W, PG-D2870W

Sharp PG-D3050W, PG-D2870W Setting the Overscan, Setting the On-screen Display, Closed Caption

Page 52

Adjusting the Projected Image (“SCR-ADJ” Menu) (Continued)

Menu operation n Page 40

4 Setting the Overscan

This function allows you to set the overscan area (display area).

	Selectable	Description
	items	Description
	items

	On	The input area is displayed without the
		screen edges.
	Off	The whole input area is displayed.

Note

•This function is available for the following signals.

With COMPUTER/COMPONENT 1 or 2 input:

-480P

-540P

-576P

-720P

-1035I

-1080I/1080P

•If noise appears at the screen edges when “Off” is selected, set the function to “On”.

•Also see “About Copyrights” on page 32.

5Setting the On-screen Display

	Selectable	Description
	items	Description
	items
	On	All on-screen displays are displayed.

	Off	VOLUME/AV MUTE/FREEZE/AUTO
		SYNC/RESIZE/PICTURE MODE/
		ECO+QUIET/MAGNIFY/Input Search/
		Audio Mute/“An invalid button has
		been pressed.” are not displayed.

6 Closed Caption

<For Americas only>

Info

•This function is available for NTSC3.58 signal.

•This function is available in the following cases only:

Resize	Keystone Correction

	PG-D3550W/
mode	PG-D3550W/		PG-D2870W
mode	D3050W		PG-D2870W
	D3050W
Normal
Area Zoom	-40	− +40	-XX − +XX
V-Stretch
16:9	-12	− +12	-XX − +XX

•“Closed Caption” is a system which allows conversations, narration, and sound effects in TV programs (Limited regions) and home videos to be viewed as captions on the screen.

•Not all programs and videos will offer closed captioning. Please look for the symbol to ensure that captions will be shown.

•Two channels are available: CC1 and CC2.

	Selectable	Description
	items	Description
	items
	Off	—

	CC1	Closed Caption mode for CH1 data
	CC2	Closed Caption mode for CH2 data

Note

•Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if there are problems at the broadcast source. This does not necessarily indicate a problem with the projector.

•If any button is pressed to call up the on- screen display while viewing a Closed Caption broadcast, the closed captions will disappear.

Image 52

Contents

PG-D3550W PG-D3050W PG-D2870W PG-D3550W/PG-D3050WModel No Serial No Iii Page See bottom of projector Void the users authority to operate this equipmentInformation Product Disposal Using the Menu Screen For Future ReferenceContents Adjusting the Projector Function PRJ ADJ1/2 Menu ReferenceCleaning Power SourcesAccessories Power-Cord ProtectionDamage Requiring Service Replacement PartsSafety Check OverloadingRest your eyes occasionally Avoid locations with extremes of temperatureDo not block the exhaust and intake vents Using the projector in other countries Temperature monitor functionOther connected equipment Closed Caption uses Bitstream Vera fontsFor Windows When you want to view the Setup ManualFor Macintosh Accessories Optional accessoriesPart Names and Functions PG-D2870WUsing the Kensington Lock Rear View TerminalsFor automatically adjusting images when VOL +/- Volume buttonsBreak Timer button Picture Mode buttonInserting the Batteries Remote control signal transmittersUsable Range Setup and Projection When connecting equipment other than a computer, see pagesOn the projector On the remote control Easy StartTurn the computer on Turn the power off Setting Up the Projector Video SetupSetting Up the Projector Standard Setup Front ProjectionScreen Size and Projection Distance Signal Input Normal ModeScreen Lens center Projection PRJ Mode Ceiling-Mount SetupConnecting the Projector to Other Equipment You may need other cables or connectors not listed belowConnecting the Projector to Other Equipment RGB Controlling the Projector by a Computer When connecting to the LAN terminal using a LAN cable Connecting the Power CordAC socket To AC outlet Power cord Supplied Power indicator Lamp indicator Turning the Projector On/OffTurning the Projector On Standby button On buttonAbout the Setup Guide Adjusting the Projected Image Adjusting the FocusPress Enter to exit the Setup Guide screen Image ProjectionAdjusting the Height Adjusting the Picture Size except PG-D2870WUse the rear adjustment foot to make the projector level Rotate the zoom ring to enlarge or shrink the picture sizePress Keystone Correcting Trapezoidal DistortionShrinks lower side Switching the Input Mode Adjusting the VolumeInput buttons AV Mute button VOL +/- Volume buttons Buttons On-screen displayResize Mode Press ResizeAbout Copyrights Operating with the Remote Control Displaying and Setting the Break TimerUsing the Spot Function Switching the Eco+Quiet ModeSelecting the Picture Mode Freezing a Moving ImageUsing the Remote Control as the Wireless Computer Mouse When moving the cursorWhen left-clicking When right-clickingMenu Items Picture menuItem when selecting S-VIDEO or Video Network menu Using the Menu Screen Menu Selections Quick Start MenuPress Menu ExampleExample Adjusting Bright Quick Start MenuMenu Selections Complete Menu Following items can be conﬁgured on the Quick Start MenuTo adjust the projected image while watching it Press P or R and select Bright to adjustPress O or Q to adjust the item selected Press EnterSelecting the Picture Mode Picture Adjustment Picture MenuMenu operation n Adjusting the Image Adjusting the Color TemperatureAdjusting the Colors Adjusting Hue, Saturation, or Value Eco+Quiet Selecting the Film Mode Reducing Image Noise DNR Resolution Setting Signal Adjustment SIG-ADJ MenuSignal Type Setting Setting the Video System Setting the Video SetupChecking the Input Signal When reproducing Ntsc signals in PAL video equipmentAdjusting the Projected Image SCR-ADJ Menu Setting the Resize ModeAdjusting the Image Position Keystone CorrectionSetting the Overscan Setting the On-screen DisplayClosed Caption For Americas onlySelecting the Setup Guide Selecting the Background ImageReversing/Inverting Projected Images Selecting the Wall ColorAuto Sync Auto Sync Adjustment Auto Power Off FunctionSpeaker Setting Auto Restart FunctionSystem Lock Function Fan Mode SettingEnter the same keycode in Re- conﬁrm Adjusting the Projector Function PRJ-ADJ1/2 Menu Keylock FunctionSelecting the Quick Start Menu COMPUTER2 SelectSetting the Function Button Operation Standby ModeStandby Audio Out Checking the Lamp Life StatusSetting a Password Select Password, then press Enter or QEnter the same password in Reconﬁrm, then press Enter On the projector, pressDhcp Client Setting TCP/IP SettingReturning to Default Settings Network Enter IP Address using P, R, Q and O, then press EnterConﬁrming the Projector Information Setting Up the Projector Network Environment Network MenuYou can conﬁrm the following items Maintenance Cleaning the projectorCleaning the lens Cleaning the exhaust and intake ventsAbout the temperature warning indicator Maintenance IndicatorsAbout the lamp indicator Red on Abnormally high Are high Lower than 95F +35ºC Lamp Regarding the LampReplacing the Lamp Removing and Installing the Lamp Unit Remove the lamp unit coverLamp unit STANDBY/ON button AC socketResetting the Lamp Timer How to Use the Storage Case Storing the ProjectorOpen the cover of the storage case Place the projector into the storage caseCompatibility Chart ComputerTroubleshooting 21-2557, 58 Sharp Electronics Corporation Speciﬁcations Dimensions Index

Related manuals

Sharp PG-D3050W, PG-D2870W Setting the Overscan, Setting the On-screen Display, Closed Caption