Sharp PG-D3050W Fan Mode Setting, System Lock Function, Enter the same keycode in Re- confirm

Page 55

6 Fan Mode Setting

This function changes the fan rotation speed.

Selectable

Description

items

 

 

 

Normal

Suitable for normal environments.

 

 

High

Set when using the projector at

 

altitudes of approximately 1,500 meters

 

(4,900 feet) or more.

When “Fan Mode” is set to “High”, the fan rotation speeds up, and the fan noise becomes louder.

7 System Lock Function

This function prevents unauthorized use of the projector. Once this function is activated, users must enter the correct keycode each time the projector is turned on. We suggest you record the keycode in a safe place where only authorized users have access.

Info

•If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 67). Even if the product warranty is valid, the keycode reset will incur a charge.

a Setting/Changing the Keycode

1 Select “System Lock”, then press

ENTER or Q.

2Select “Next”, then press ENTER.

•The screen for entering the keycode appears.

3Press the 4 buttons on the remote control or on the projector to enter the preset keycode in “Old Code”.

•When setting the keycode for the fi rst time, press R on the projector for four times.

 

 

PRJ - ADJ1

 

 

Setting the System Lock

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Old Code

 

–

–

–

–

 

 

New Code

 

– – – –

 

 

Reconfirm

 

– – – –

 

Menu operation n Page 40

Note

•If you input a wrong keycode, the cursor returns to the fi rst point of the “Old Code”.

•The preset keycode is 4 R buttons on the projector. When you press the R button four times, the keycord input screen disappears.

4 Press the 4 buttons on the remote control or on the projector to enter the new keycode in “New Code”.

Note

•You cannot use the following buttons for keycode: STANDBY/ON, ON,

STANDBY, ENTER, L-CLICK, R- CLICK/RETURN and MENU

•System Lock function recognizes each button on the remote control or on the projector as an individual button, even if they share the same button name. If you used the buttons on the projector in setting your keycode, the keycode cannot be canceled with the remote control.

 

 

PRJ - ADJ1

 

 

Setting the System Lock

 

 

 

 

 

 

 

Old Code

* * * *

 

 

New Code

 

–

–

–

–

 

 

Reconfirm

 

– – – –

5Enter the same keycode in “Re- confirm”.

Note

Useful Features

steps 4 and 5 above.

To cancel the keycode that you have

 

already set

 

• Press R on the projector for four times in

 

When the System Lock is set

•When System Lock is set, the keycode input screen appears after the power is turned on. When it appears, enter the right keycode to start projection.

Input screen for keycode

 

 

 

 

 

 

 

 

System Lock

–

–

–

–

 

 

 

 

 

 

 

 

51

Page 54 Page 56
Image 55
Page 54 Page 56
Contents PG-D3550W/PG-D3050W PG-D3550W PG-D3050W PG-D2870WModel No Serial No Iii Page Void the users authority to operate this equipment See bottom of projectorInformation Product Disposal For Future Reference Using the Menu ScreenContents Reference Adjusting the Projector Function PRJ ADJ1/2 MenuPower-Cord Protection CleaningPower Sources AccessoriesOverloading Damage Requiring ServiceReplacement Parts Safety CheckRest your eyes occasionally Avoid locations with extremes of temperatureDo not block the exhaust and intake vents Closed Caption uses Bitstream Vera fonts Using the projector in other countriesTemperature monitor function Other connected equipmentFor Windows When you want to view the Setup ManualFor Macintosh Optional accessories AccessoriesPG-D2870W Part Names and FunctionsRear View Terminals Using the Kensington LockPicture Mode button For automatically adjusting images whenVOL +/- Volume buttons Break Timer buttonInserting the Batteries Remote control signal transmittersUsable Range Easy Start Setup and ProjectionWhen connecting equipment other than a computer, see pages On the projector On the remote controlTurn the computer on Turn the power off Standard Setup Front Projection Setting Up the ProjectorVideo Setup Setting Up the ProjectorScreen Size and Projection Distance Signal Input Normal ModeScreen Lens center Ceiling-Mount Setup Projection PRJ ModeYou may need other cables or connectors not listed below Connecting the Projector to Other EquipmentConnecting the Projector to Other Equipment RGB Controlling the Projector by a Computer When connecting to the LAN terminal using a LAN cable Connecting the Power CordAC socket To AC outlet Power cord Supplied Standby button On button Power indicator Lamp indicatorTurning the Projector On/Off Turning the Projector OnImage Projection About the Setup GuideAdjusting the Projected Image Adjusting the Focus Press Enter to exit the Setup Guide screenRotate the zoom ring to enlarge or shrink the picture size Adjusting the HeightAdjusting the Picture Size except PG-D2870W Use the rear adjustment foot to make the projector levelPress Keystone Correcting Trapezoidal DistortionShrinks lower side On-screen display Switching the Input ModeAdjusting the Volume Input buttons AV Mute button VOL +/- Volume buttons ButtonsPress Resize Resize ModeAbout Copyrights Switching the Eco+Quiet Mode Operating with the Remote ControlDisplaying and Setting the Break Timer Using the Spot FunctionFreezing a Moving Image Selecting the Picture ModeWhen right-clicking Using the Remote Control as the Wireless Computer MouseWhen moving the cursor When left-clickingPicture menu Menu ItemsItem when selecting S-VIDEO or Video Network menu Example Using the Menu ScreenMenu Selections Quick Start Menu Press MenuFollowing items can be configured on the Quick Start Menu Example Adjusting BrightQuick Start Menu Menu Selections Complete MenuPress Enter To adjust the projected image while watching itPress P or R and select Bright to adjust Press O or Q to adjust the item selectedSelecting the Picture Mode Picture Adjustment Picture MenuMenu operation n Adjusting Hue, Saturation, or Value Adjusting the ImageAdjusting the Color Temperature Adjusting the ColorsEco+Quiet Selecting the Film ModeReducing Image Noise DNR Resolution Setting Signal Adjustment SIG-ADJ MenuSignal Type Setting When reproducing Ntsc signals in PAL video equipment Setting the Video SystemSetting the Video Setup Checking the Input SignalKeystone Correction Adjusting the Projected Image SCR-ADJ MenuSetting the Resize Mode Adjusting the Image PositionFor Americas only Setting the OverscanSetting the On-screen Display Closed CaptionSelecting the Wall Color Selecting the Setup GuideSelecting the Background Image Reversing/Inverting Projected ImagesAuto Restart Function Auto Sync Auto Sync AdjustmentAuto Power Off Function Speaker SettingSystem Lock Function Fan Mode SettingEnter the same keycode in Re- confirm COMPUTER2 Select Adjusting the Projector Function PRJ-ADJ1/2 MenuKeylock Function Selecting the Quick Start MenuChecking the Lamp Life Status Setting the Function Button OperationStandby Mode Standby Audio OutOn the projector, press Setting a PasswordSelect Password, then press Enter or Q Enter the same password in Reconfirm, then press EnterEnter IP Address using P, R, Q and O, then press Enter Dhcp Client SettingTCP/IP Setting Returning to Default Settings NetworkConfirming the Projector Information Setting Up the Projector Network Environment Network MenuYou can confirm the following items Cleaning the exhaust and intake vents MaintenanceCleaning the projector Cleaning the lensAbout the temperature warning indicator Maintenance IndicatorsAbout the lamp indicator Red on Abnormally high Are high Lower than 95F +35ºC Lamp Regarding the LampReplacing the Lamp STANDBY/ON button AC socket Removing and Installing the Lamp UnitRemove the lamp unit cover Lamp unitResetting the Lamp Timer Place the projector into the storage case How to Use the Storage CaseStoring the Projector Open the cover of the storage caseComputer Compatibility Chart21-25 Troubleshooting57, 58 Sharp Electronics Corporation Specifications Dimensions Index
Related manuals
Manual 26 pages 26.23 Kb

PG-D3550W, PG-D3050W, PG-D2870W specifications

The Sharp PG-D3550W, PG-D2870W, and PG-D3050W are advanced projectors designed to meet the demands of a variety of presentation and viewing environments. Each model is tailored to provide high-quality visual performance while incorporating innovative technology and user-friendly features.

The Sharp PG-D3550W is known for its impressive brightness of 3500 lumens, making it suitable for well-lit rooms. It supports a native resolution of 1280 x 800 pixels, delivering sharp and clear images that are ideal for professional presentations and educational settings. One of the standout features of this model is its extensive connectivity options, including HDMI, VGA, and USB inputs, allowing users to easily connect a wide range of devices. Additionally, the projector includes a 1.2x optical zoom lens, enabling flexible placement in various environments. The built-in speaker system further enhances presentations without the need for external audio equipment.

The PG-D2870W model shines with its optimized brightness of 2800 lumens, making it a robust choice for smaller conference rooms and classrooms. With a native resolution of 1280 x 800, this projector also guarantees high-quality images. It incorporates Sharp’s advanced color technology, which ensures vivid and accurate color reproduction. The PG-D2870W also features a user-friendly interface, allowing presenters to easily navigate settings and inputs. Its lightweight design and easy portability make it convenient for onsite presentations.

Lastly, the Sharp PG-D3050W is marked by its versatility and solid performance. With a brightness of 3000 lumens and a native resolution of 1280 x 800, it provides balanced performance across different lighting conditions. Users will appreciate its Quick Start feature, which allows for rapid power-up, reducing downtime before presentations. The projector comes equipped with dynamic contrast technology, enhancing image quality and depth. Its eco-friendly mode helps reduce energy consumption, making it a sustainable choice.

In summary, the Sharp PG-D3550W, PG-D2870W, and PG-D3050W projectors cater to a variety of professional and academic needs. Each model combines high brightness, versatile connectivity, and enhanced image quality, ensuring reliable performance and impressive visuals for any occasion. They exemplify Sharp's commitment to innovation and quality, making them essential tools for effective communication and engaging presentations.
Top Page Image Contents