Sharp PG-D3050W, PG-D2870W, PG-D3550W appendix For Future Reference, Using the Menu Screen

Page 7

How to Read this Operation Manual

■The speciﬁcations are slightly different, depending on the model. However, you can connect and operate all models in the same manner.

•In this operation manual, the illustration and the screen display are simpliﬁ ed for explanation, and may differ slightly from the actual display. The examples used throughout this manual are based on the PG-D3550W/PG-D3050W model.

Introduction

Using the Menu Screen

Select from the Quick Start Menu, which is a collection of the most frequently used functions, or the Complete Menu, which enables advanced settings and adjustments.

Adjustment buttons (P/R/O/Q)

ENTER button

MENU button

ENTER button

Adjustment buttons (P/R/O/Q)

RETURN button

• Press RETURN to return to the previous screen when the menu is displayed.

MENU button

Menu Selections (Quick Start Menu)

• This operation can also be performed by using the buttons on the projector.

Buttons used in this operation

Button used in this step

1 Press MENU.

• The “Quick Start Menu” screen for the selected Input mode is displayed.

2 Press P or R to select the desired item, then press ENTER.

3 Press P/R/O/Q to adjust the item selected, then press

ENTER.

Info

•To display the advanced settings and adjustments, select “Go To Complete Menu”. Press ENTER to display the Complete Menu screen.

•If you do not want to display the Quick Start Menu, set “Go To Complete Menu” - “PRJ-ADJ2” - “Quick Start Menu” to “Off”. (See page 52.)

		Example

		Quick Start Menu
	Input Search Start
	Resolution	1024×768
	Resize	Normal
	Keystone	0
	Eco+Quiet	Off
	Language	English
	Information
		Go To Complete Menu…

	SEL./ADJ.	ENTER				END

Features

Useful

On-screen display

39

Info .........Indicates safeguards for using the projector.

Note ....... Indicates additional information for setting up and operating the

projector.

For Future Reference

		Maintenance			Troubleshooting					Index
		P. 57				PP. 65 and 66				P. 70

3

Image 7

Contents

PG-D3550W/PG-D3050W PG-D3550W PG-D3050W PG-D2870WModel No Serial No Iii Page Void the users authority to operate this equipment See bottom of projectorInformation Product Disposal For Future Reference Using the Menu ScreenContents Reference Adjusting the Projector Function PRJ ADJ1/2 MenuPower-Cord Protection CleaningPower Sources AccessoriesOverloading Damage Requiring ServiceReplacement Parts Safety CheckRest your eyes occasionally Avoid locations with extremes of temperatureDo not block the exhaust and intake vents Closed Caption uses Bitstream Vera fonts Using the projector in other countriesTemperature monitor function Other connected equipmentFor Windows When you want to view the Setup ManualFor Macintosh Optional accessories AccessoriesPG-D2870W Part Names and FunctionsRear View Terminals Using the Kensington LockPicture Mode button For automatically adjusting images whenVOL +/- Volume buttons Break Timer buttonInserting the Batteries Remote control signal transmittersUsable Range Easy Start Setup and ProjectionWhen connecting equipment other than a computer, see pages On the projector On the remote controlTurn the computer on Turn the power off Standard Setup Front Projection Setting Up the ProjectorVideo Setup Setting Up the ProjectorScreen Size and Projection Distance Signal Input Normal ModeScreen Lens center Ceiling-Mount Setup Projection PRJ ModeYou may need other cables or connectors not listed below Connecting the Projector to Other EquipmentConnecting the Projector to Other Equipment RGB Controlling the Projector by a Computer When connecting to the LAN terminal using a LAN cable Connecting the Power CordAC socket To AC outlet Power cord Supplied Standby button On button Power indicator Lamp indicatorTurning the Projector On/Off Turning the Projector OnImage Projection About the Setup GuideAdjusting the Projected Image Adjusting the Focus Press Enter to exit the Setup Guide screenRotate the zoom ring to enlarge or shrink the picture size Adjusting the HeightAdjusting the Picture Size except PG-D2870W Use the rear adjustment foot to make the projector levelPress Keystone Correcting Trapezoidal DistortionShrinks lower side On-screen display Switching the Input ModeAdjusting the Volume Input buttons AV Mute button VOL +/- Volume buttons ButtonsPress Resize Resize ModeAbout Copyrights Switching the Eco+Quiet Mode Operating with the Remote ControlDisplaying and Setting the Break Timer Using the Spot FunctionFreezing a Moving Image Selecting the Picture ModeWhen right-clicking Using the Remote Control as the Wireless Computer MouseWhen moving the cursor When left-clickingPicture menu Menu ItemsItem when selecting S-VIDEO or Video Network menu Example Using the Menu ScreenMenu Selections Quick Start Menu Press MenuFollowing items can be conﬁgured on the Quick Start Menu Example Adjusting BrightQuick Start Menu Menu Selections Complete MenuPress Enter To adjust the projected image while watching itPress P or R and select Bright to adjust Press O or Q to adjust the item selectedSelecting the Picture Mode Picture Adjustment Picture MenuMenu operation n Adjusting Hue, Saturation, or Value Adjusting the ImageAdjusting the Color Temperature Adjusting the ColorsEco+Quiet Selecting the Film ModeReducing Image Noise DNR Resolution Setting Signal Adjustment SIG-ADJ MenuSignal Type Setting When reproducing Ntsc signals in PAL video equipment Setting the Video SystemSetting the Video Setup Checking the Input SignalKeystone Correction Adjusting the Projected Image SCR-ADJ MenuSetting the Resize Mode Adjusting the Image PositionFor Americas only Setting the OverscanSetting the On-screen Display Closed CaptionSelecting the Wall Color Selecting the Setup GuideSelecting the Background Image Reversing/Inverting Projected ImagesAuto Restart Function Auto Sync Auto Sync AdjustmentAuto Power Off Function Speaker SettingSystem Lock Function Fan Mode SettingEnter the same keycode in Re- conﬁrm COMPUTER2 Select Adjusting the Projector Function PRJ-ADJ1/2 MenuKeylock Function Selecting the Quick Start MenuChecking the Lamp Life Status Setting the Function Button OperationStandby Mode Standby Audio OutOn the projector, press Setting a PasswordSelect Password, then press Enter or Q Enter the same password in Reconﬁrm, then press EnterEnter IP Address using P, R, Q and O, then press Enter Dhcp Client SettingTCP/IP Setting Returning to Default Settings NetworkConﬁrming the Projector Information Setting Up the Projector Network Environment Network MenuYou can conﬁrm the following items Cleaning the exhaust and intake vents MaintenanceCleaning the projector Cleaning the lensAbout the temperature warning indicator Maintenance IndicatorsAbout the lamp indicator Red on Abnormally high Are high Lower than 95F +35ºC Lamp Regarding the LampReplacing the Lamp STANDBY/ON button AC socket Removing and Installing the Lamp UnitRemove the lamp unit cover Lamp unitResetting the Lamp Timer Place the projector into the storage case How to Use the Storage CaseStoring the Projector Open the cover of the storage caseComputer Compatibility Chart21-25 Troubleshooting57, 58 Sharp Electronics Corporation Speciﬁcations Dimensions Index

Related manuals

Manual 26 pages 26.23 Kb