![](/images/new-backgrounds/1108330/10833087x1.webp)
Using the Menu Screen (Continued)
Quick Start Menu
The following items can be configured on the Quick Start Menu.
Selectable items | Description |
Input Search Start | Automatically searches for and switches to the appropriate Input mode. |
| Pressing an operation button during input searching cancels the search. |
| |
Resolution | Manually change the resolution. |
| Use this function when the image and screen size do not match with the |
| resolution selected automatically. (See page 45.) |
Resize | Changes the Resize mode. |
| Use this function to stretch the image vertically or horizontally or when the |
| edges of the image cannot be seen. (See page 47.) |
Keystone | Corrects the keystone distortion of projected images. |
| Use this function to correct the trapezoidal distortion of images caused when |
| projecting images at an angle to the screen. (See page 47.) |
Eco+Quiet | When set to “On”, this function reduces the cooling fan noise and power |
| consumption, thereby prolonging the operating life of the lamp. (See page 44.) |
Language | Selects the language displayed on the screen. (See page 49.) |
Information | Displays the input signal, lamp use time, remaining lamp life, etc. |
| |
Go To Complete Menu | Displays the Complete Menu for advanced settings and adjustments. |
Note
•The setting of Resize mode will be made independently for each Input mode.
•The setting of Eco+Quiet mode will be made independently for each Input mode and each Picture mode.
Menu Selections (Complete Menu)
Example: Adjusting “Bright”.
• This operation can also be performed by using the buttons on the projector.
Example: “Picture” screen menu for COMPUTER (RGB) input
Menu item
| | | | | | | | | | |
| Picture | SIG | SCR | PRJ1 | PRJ2 | Net. | |
| | | | | | | | |
| Picture Mode | | | | Standard | | | |
| Contrast | | | 0 | | | | | | |
| Bright | | | 0 | | | | | | |
| | | | | | | | |
| Red | | | 0 | | | | | | |
| | | | | | | | |
| Blue | | | 0 | | | | | | |
| | | | | | | | |
| CLR Temp | | | 0 | | | | | | |
| | | | | | | | |
| BrilliantColorTM | | 1 | | | | | | |
| | | | | | | |
| C.M.S. Setting | | | On | | | |
| C.M.S. | | | | | | | | | |
| DNR | | | | Level 2 | | | |
| Eco+Quiet | | | | Off | | | |
| Reset | | | | | | | | | |
| | | | | | | | | |
| SEL./ADJ. | | ENTER | | | | END | |
| | | | | | | | | | |
PG-D3550W PG-D3050W PG-D2870W
PG-D3550W/PG-D3050W
Model No Serial No
Iii
Page
See bottom of projector
Void the users authority to operate this equipment
Information Product Disposal
Using the Menu Screen
For Future Reference
Contents
Adjusting the Projector Function PRJ ADJ1/2 Menu
Reference
Cleaning
Power Sources
Accessories
Power-Cord Protection
Damage Requiring Service
Replacement Parts
Safety Check
Overloading
Do not block the exhaust and intake vents
Avoid locations with extremes of temperature
Rest your eyes occasionally
Using the projector in other countries
Temperature monitor function
Other connected equipment
Closed Caption uses Bitstream Vera fonts
For Macintosh
When you want to view the Setup Manual
For Windows
Accessories
Optional accessories
Part Names and Functions
PG-D2870W
Using the Kensington Lock
Rear View Terminals
For automatically adjusting images when
VOL +/- Volume buttons
Break Timer button
Picture Mode button
Usable Range
Remote control signal transmitters
Inserting the Batteries
Setup and Projection
When connecting equipment other than a computer, see pages
On the projector On the remote control
Easy Start
Turn the computer on Turn the power off
Setting Up the Projector
Video Setup
Setting Up the Projector
Standard Setup Front Projection
Screen Lens center
Signal Input Normal Mode
Screen Size and Projection Distance
Projection PRJ Mode
Ceiling-Mount Setup
Connecting the Projector to Other Equipment
You may need other cables or connectors not listed below
Connecting the Projector to Other Equipment
RGB
Controlling the Projector by a Computer
AC socket To AC outlet Power cord Supplied
Connecting the Power Cord
When connecting to the LAN terminal using a LAN cable
Power indicator Lamp indicator
Turning the Projector On/Off
Turning the Projector On
Standby button On button
About the Setup Guide
Adjusting the Projected Image Adjusting the Focus
Press Enter to exit the Setup Guide screen
Image Projection
Adjusting the Height
Adjusting the Picture Size except PG-D2870W
Use the rear adjustment foot to make the projector level
Rotate the zoom ring to enlarge or shrink the picture size
Shrinks lower side
Correcting Trapezoidal Distortion
Press Keystone
Switching the Input Mode
Adjusting the Volume
Input buttons AV Mute button VOL +/- Volume buttons Buttons
On-screen display
Resize Mode
Press Resize
About Copyrights
Operating with the Remote Control
Displaying and Setting the Break Timer
Using the Spot Function
Switching the Eco+Quiet Mode
Selecting the Picture Mode
Freezing a Moving Image
Using the Remote Control as the Wireless Computer Mouse
When moving the cursor
When left-clicking
When right-clicking
Menu Items
Picture menu
Item when selecting S-VIDEO or Video
Network menu
Using the Menu Screen
Menu Selections Quick Start Menu
Press Menu
Example
Example Adjusting Bright
Quick Start Menu
Menu Selections Complete Menu
Following items can be configured on the Quick Start Menu
To adjust the projected image while watching it
Press P or R and select Bright to adjust
Press O or Q to adjust the item selected
Press Enter
Menu operation n
Picture Adjustment Picture Menu
Selecting the Picture Mode
Adjusting the Image
Adjusting the Color Temperature
Adjusting the Colors
Adjusting Hue, Saturation, or Value
Reducing Image Noise DNR
Selecting the Film Mode
Eco+Quiet
Signal Type Setting
Signal Adjustment SIG-ADJ Menu
Resolution Setting
Setting the Video System
Setting the Video Setup
Checking the Input Signal
When reproducing Ntsc signals in PAL video equipment
Adjusting the Projected Image SCR-ADJ Menu
Setting the Resize Mode
Adjusting the Image Position
Keystone Correction
Setting the Overscan
Setting the On-screen Display
Closed Caption
For Americas only
Selecting the Setup Guide
Selecting the Background Image
Reversing/Inverting Projected Images
Selecting the Wall Color
Auto Sync Auto Sync Adjustment
Auto Power Off Function
Speaker Setting
Auto Restart Function
Enter the same keycode in Re- confirm
Fan Mode Setting
System Lock Function
Adjusting the Projector Function PRJ-ADJ1/2 Menu
Keylock Function
Selecting the Quick Start Menu
COMPUTER2 Select
Setting the Function Button Operation
Standby Mode
Standby Audio Out
Checking the Lamp Life Status
Setting a Password
Select Password, then press Enter or Q
Enter the same password in Reconfirm, then press Enter
On the projector, press
Dhcp Client Setting
TCP/IP Setting
Returning to Default Settings Network
Enter IP Address using P, R, Q and O, then press Enter
You can confirm the following items
Setting Up the Projector Network Environment Network Menu
Confirming the Projector Information
Maintenance
Cleaning the projector
Cleaning the lens
Cleaning the exhaust and intake vents
About the lamp indicator
Maintenance Indicators
About the temperature warning indicator
Red on Abnormally high Are high Lower than 95F +35ºC
Replacing the Lamp
Regarding the Lamp
Lamp
Removing and Installing the Lamp Unit
Remove the lamp unit cover
Lamp unit
STANDBY/ON button AC socket
Resetting the Lamp Timer
How to Use the Storage Case
Storing the Projector
Open the cover of the storage case
Place the projector into the storage case
Compatibility Chart
Computer
Troubleshooting
21-25
57, 58
Sharp Electronics Corporation
Specifications
Dimensions
Index