Sharp PG-D3550W, PG-D2870W Adjusting the Projector Function PRJ-ADJ1/2 Menu, Keylock Function

Page 56

Adjusting the Projector Function (“PRJ-ADJ1/2” Menu) (Continued)

8 Keylock Function

Use this function to lock the operation buttons on the projector.

This function can be set using either the menu screen or ENTER on the projector.

a Setting with the menu screen

Selectable

Description

items

 

 

 

On

All buttons on the projector, except

 

STANDBY/ON, are locked.

Off

Turns off the Keylock function.

a Setting with the projector buttons

Locking the Operation Buttons

1 Hold down ENTER on the projector for about 5 seconds while the projector is being turned on.

• The Keylock function screen is displayed.

PRJ - ADJ1

Use this function to lock the operation buttons on the projector.

(Except STANDBY/ON button)

Note: You can release the keylock by holding down ENTER on the projector for about 5 seconds.

Return

On

SEL.

ENTER

END

2 Select “On”, then press ENTER.

On-screen display

•The Keylock function does not affect the operation with the remote control buttons.

•You cannot use the Keylock function while the projector is warming up.

Menu operation n Page 40

Taking the Keylock Off

Hold down ENTER on the projector for about 5 seconds.

On-screen display

Info

•Even when Keylock function is set to “On”, STANDBY/ON on the projector can be used to turn on and off the power.

•Keylock cannot be set while the projector is: displaying the “Setup Guide” or “Menu” screens, in Standby mode, warming up, changing input signals, operating the Auto Sync or Input Search function, in Freeze mode or on the “System Lock” screen during warming up.

9 Selecting the Quick

Start Menu

Selectable items

Description

 

 

On

Pressing MENU displays the

 

Quick Start Menu screen.

 

 

Off

Pressing MENU displays the

 

Complete Menu screen.

0 COMPUTER2 Select

You can also use the MONITOR OUT terminal as the COMPUTER/COMPONENT 2 terminal. Select whether to use the terminal as an input terminal or output terminal.

Selectable items

Description

 

 

Input

The terminal can be used as an

 

input terminal (COMPUTER/

 

COMPONENT 2).

 

 

Monitor Output

The terminal can be used as an

output terminal (MONITOR

 

 

OUT).

Note

•Set this before connecting the external equipment.

•The setting cannot be changed when Input mode is “COMPUTER 2”.

52

Page 55 Page 57
Image 56
Page 55 Page 57
Contents PG-D3550W PG-D3050W PG-D2870W PG-D3550W/PG-D3050WModel No Serial No Iii Page See bottom of projector Void the users authority to operate this equipmentInformation Product Disposal Using the Menu Screen For Future ReferenceContents Adjusting the Projector Function PRJ ADJ1/2 Menu ReferenceCleaning Power SourcesAccessories Power-Cord ProtectionDamage Requiring Service Replacement PartsSafety Check OverloadingDo not block the exhaust and intake vents Avoid locations with extremes of temperatureRest your eyes occasionally Using the projector in other countries Temperature monitor functionOther connected equipment Closed Caption uses Bitstream Vera fontsFor Macintosh When you want to view the Setup ManualFor Windows Accessories Optional accessoriesPart Names and Functions PG-D2870WUsing the Kensington Lock Rear View TerminalsFor automatically adjusting images when VOL +/- Volume buttonsBreak Timer button Picture Mode buttonUsable Range Remote control signal transmittersInserting the Batteries Setup and Projection When connecting equipment other than a computer, see pagesOn the projector On the remote control Easy StartTurn the computer on Turn the power off Setting Up the Projector Video SetupSetting Up the Projector Standard Setup Front ProjectionScreen Lens center Signal Input Normal ModeScreen Size and Projection Distance Projection PRJ Mode Ceiling-Mount SetupConnecting the Projector to Other Equipment You may need other cables or connectors not listed belowConnecting the Projector to Other Equipment RGB Controlling the Projector by a Computer AC socket To AC outlet Power cord Supplied Connecting the Power CordWhen connecting to the LAN terminal using a LAN cable Power indicator Lamp indicator Turning the Projector On/OffTurning the Projector On Standby button On buttonAbout the Setup Guide Adjusting the Projected Image Adjusting the FocusPress Enter to exit the Setup Guide screen Image ProjectionAdjusting the Height Adjusting the Picture Size except PG-D2870WUse the rear adjustment foot to make the projector level Rotate the zoom ring to enlarge or shrink the picture sizeShrinks lower side Correcting Trapezoidal DistortionPress Keystone Switching the Input Mode Adjusting the VolumeInput buttons AV Mute button VOL +/- Volume buttons Buttons On-screen displayResize Mode Press ResizeAbout Copyrights Operating with the Remote Control Displaying and Setting the Break TimerUsing the Spot Function Switching the Eco+Quiet ModeSelecting the Picture Mode Freezing a Moving ImageUsing the Remote Control as the Wireless Computer Mouse When moving the cursorWhen left-clicking When right-clickingMenu Items Picture menuItem when selecting S-VIDEO or Video Network menu Using the Menu Screen Menu Selections Quick Start MenuPress Menu ExampleExample Adjusting Bright Quick Start MenuMenu Selections Complete Menu Following items can be configured on the Quick Start MenuTo adjust the projected image while watching it Press P or R and select Bright to adjustPress O or Q to adjust the item selected Press EnterMenu operation n Picture Adjustment Picture MenuSelecting the Picture Mode Adjusting the Image Adjusting the Color TemperatureAdjusting the Colors Adjusting Hue, Saturation, or ValueReducing Image Noise DNR Selecting the Film ModeEco+Quiet Signal Type Setting Signal Adjustment SIG-ADJ MenuResolution Setting Setting the Video System Setting the Video SetupChecking the Input Signal When reproducing Ntsc signals in PAL video equipmentAdjusting the Projected Image SCR-ADJ Menu Setting the Resize ModeAdjusting the Image Position Keystone CorrectionSetting the Overscan Setting the On-screen DisplayClosed Caption For Americas onlySelecting the Setup Guide Selecting the Background ImageReversing/Inverting Projected Images Selecting the Wall ColorAuto Sync Auto Sync Adjustment Auto Power Off FunctionSpeaker Setting Auto Restart FunctionEnter the same keycode in Re- confirm Fan Mode SettingSystem Lock Function Adjusting the Projector Function PRJ-ADJ1/2 Menu Keylock FunctionSelecting the Quick Start Menu COMPUTER2 SelectSetting the Function Button Operation Standby ModeStandby Audio Out Checking the Lamp Life StatusSetting a Password Select Password, then press Enter or QEnter the same password in Reconfirm, then press Enter On the projector, pressDhcp Client Setting TCP/IP SettingReturning to Default Settings Network Enter IP Address using P, R, Q and O, then press EnterYou can confirm the following items Setting Up the Projector Network Environment Network MenuConfirming the Projector Information Maintenance Cleaning the projectorCleaning the lens Cleaning the exhaust and intake ventsAbout the lamp indicator Maintenance IndicatorsAbout the temperature warning indicator Red on Abnormally high Are high Lower than 95F +35ºC Replacing the Lamp Regarding the LampLamp Removing and Installing the Lamp Unit Remove the lamp unit coverLamp unit STANDBY/ON button AC socketResetting the Lamp Timer How to Use the Storage Case Storing the ProjectorOpen the cover of the storage case Place the projector into the storage caseCompatibility Chart ComputerTroubleshooting 21-2557, 58 Sharp Electronics Corporation Specifications Dimensions Index
Related manuals
Manual 26 pages 26.23 Kb

PG-D3550W, PG-D3050W, PG-D2870W specifications

The Sharp PG-D3550W, PG-D2870W, and PG-D3050W are advanced projectors designed to meet the demands of a variety of presentation and viewing environments. Each model is tailored to provide high-quality visual performance while incorporating innovative technology and user-friendly features.

The Sharp PG-D3550W is known for its impressive brightness of 3500 lumens, making it suitable for well-lit rooms. It supports a native resolution of 1280 x 800 pixels, delivering sharp and clear images that are ideal for professional presentations and educational settings. One of the standout features of this model is its extensive connectivity options, including HDMI, VGA, and USB inputs, allowing users to easily connect a wide range of devices. Additionally, the projector includes a 1.2x optical zoom lens, enabling flexible placement in various environments. The built-in speaker system further enhances presentations without the need for external audio equipment.

The PG-D2870W model shines with its optimized brightness of 2800 lumens, making it a robust choice for smaller conference rooms and classrooms. With a native resolution of 1280 x 800, this projector also guarantees high-quality images. It incorporates Sharp’s advanced color technology, which ensures vivid and accurate color reproduction. The PG-D2870W also features a user-friendly interface, allowing presenters to easily navigate settings and inputs. Its lightweight design and easy portability make it convenient for onsite presentations.

Lastly, the Sharp PG-D3050W is marked by its versatility and solid performance. With a brightness of 3000 lumens and a native resolution of 1280 x 800, it provides balanced performance across different lighting conditions. Users will appreciate its Quick Start feature, which allows for rapid power-up, reducing downtime before presentations. The projector comes equipped with dynamic contrast technology, enhancing image quality and depth. Its eco-friendly mode helps reduce energy consumption, making it a sustainable choice.

In summary, the Sharp PG-D3550W, PG-D2870W, and PG-D3050W projectors cater to a variety of professional and academic needs. Each model combines high brightness, versatile connectivity, and enhanced image quality, ensuring reliable performance and impressive visuals for any occasion. They exemplify Sharp's commitment to innovation and quality, making them essential tools for effective communication and engaging presentations.
Top Page Image Contents