Sharp PG-D3010X, PG-D3510X, PG-D2710X appendix Rear View Terminals, Using the Kensington Lock

1 2 3 4 5 6 7 8

9 10

14

11 12 13

Introduction

Rear View (Terminals)

1LAN terminal 25

Terminal for controlling the projector using a computer via network.

2RS-232C terminal 24

Terminal for controlling the projector using a computer.

3USB terminal 35

Terminal connecting with the USB terminal on the computer for using the supplied remote control as the computer mouse.

4AUDIO OUT terminal 23

Audio output terminal of equipment connected to the audio input terminal.

5MONITOR OUT* terminal 23

(Output terminal for computer RGB and component signals)

Terminal for connecting a monitor.

COMPUTER/COMPONENT 2* input terminal 21, 22

Terminal for computer RGB and component signals.

*You must switch the setting depending on whether you are using the terminal for MONITOR OUT or COMPUTER/COMPONENT 2 input.

6AUDIO 1 input terminal 23

7COMPUTER/COMPONENT 1 input terminal 21, 22

Terminal for computer RGB and component signals.

8S-VIDEO input terminal 22

Terminal for connecting video equipment with an S-video terminal.

9VIDEO input terminal 22

Terminal for connecting video equipment.

10AUDIO 2 input terminal 23

11AC socket 25

Connect the supplied power cord.

12Kensington Security Standard connector

13Rear adjustment foot 28

14Security bar

Using the Kensington Lock

•This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the projector.

13