Sharp PG-D3510X Setting the Function Button Operation, Standby Mode, DLP LinkTM DLP LinkTM Invert

Setting the FUNCTION

Button Operation

You can assign one of the following functions to the FUNCTION button on the remote con- trol. The assigned function can be performed by just pressing FUNCTION.

Selectable items	Description
Input Search	Automatically searches for and
	switches to the appropriate Input
	mode.
Audio Mute	For temporarily turning off the
	sound. Press FUNCTION again
	to turn on the sound
Image Shift	For moving the projected image
	vertically. (See page 47.)
Signal Info	Input signal information is
	displayed.

STANDBY Mode

When set to “Eco”, power consumption is reduced in Standby mode.

Selectable	Description
items
Eco	The monitor output, RS-232C and
	Network functions are switched off in
	Standby mode.
Quick Start	The monitor output, RS-232C and
	Network functions are activated even if
	the projector is in Standby mode.

Menu operation n Page 40

Returning to the Default Settings

This function allows you to initialize the settings you have made in the projector.

Note

•The following items or menu cannot be initialized.

-Resolution

-Language

-Lamp Timer (Life)

-System Lock

-COMPUTER2 Select

Checking the Lamp Life Status

You can confirm the cumulative lamp usage time and the remaining lamp life (percentage).

Lamp usage condition		Remaining lamp life
	“Life”	100%	5%
Operated exclusively		Approx.	Approx.
with “Eco+Quiet”		4,000 hours	200 hours
set to “On”
Operated exclusively		Approx.	Approx.
with “Eco+Quiet”		2,000 hours	100 hours
set to “Off”

DLP® LinkTM

See the OPERATION MANUAL FOR STEREOSCOPIC 3D PROJECTION provided separately.

DLP® LinkTM Invert

See the OPERATION MANUAL FOR STEREOSCOPIC 3D PROJECTION provided separately.

Note

•It is recommended that the lamp be changed when the remaining lamp life becomes 5%.

•The lamp life may vary depending on the usage condition.

Features Useful

53