5
6
7
Resetting the Lamp Timer of the Projector via LAN
Click “Properties” on the “File” menu.
Click the “Settings” tab, and then click “ASCII Setup”.
Select the check boxes next to “Send line ends with line feeds”, “Echo typed characters locally”, and “Append line feeds to incoming line ends”, and click “OK”.
• The LAMPRESET Properties window appears, click “OK”.
8
9
If a user name and/or password is set for the projector, enter the user name and password.
Send the lamp reset command “LPRE0001”.
•This command can only be sent when the projector is in standby mode.
•When “OK” is received, this indicates that the lamp was successfully reset.
10
Close HyperTerminal.
-23