
Operation
  | Brightness  | 
  | |
  | Contrast  | 
  | |
  | 
  | 
  | |
  | Color  | (not available on DVI or   | |
  | 
  | inputs)  | |
  | Tint  | ||
  | 
  | 
  | |
  | Sharpness  | 1, 2, 3, 4, 5  | |
  | 
  | 
  | |
Picture Adjust | Gamma  | 1.0, 1.5, 1.8, 2.0, 2.2, 2.35, 2.5, 2.8  | |
  | 
  | ||
Color Temp  | Native, 5,000K, 5,500K, ... 10,000K  | ||
  | |||
  | 
  | 
  | |
  | ICC Select  | Standard, NTSC, HDTV, PAL  | |
  | 
  | 
  | |
  | White Balance  | R/G/B Gain  | |
  | 
  | ||
  | R/G/B Offset  | ||
  | 
  | ||
  | 
  | 
  | |
  | Save Settings  | 
  | |
  | 
  | 
  | |
  | Load Saved Settings  | Custom 1, ISF Day, ISF Night  | |
  | 
  | 
  | |
  | Video  | 
  | |
  | 
  | 
  | |
  | 
  | ||
  | 
  | 
  | |
Source Select  | Component 1  | 
  | |
  | 
  | ||
Component 2  | 
  | ||
  | 
  | ||
  | 
  | 
  | |
  | 
  | ||
  | 
  | 
  | |
  | DVI  | 
  | |
  | 
  | 
  | |
  | Anamorphic (16/9)  | 
  | |
  | 
  | 
  | |
  | Standard (4/3) (not  | 
  | |
  | available with HD signals)  | 
  | |
Aspect Ratio | 
  | 
  | |
LetterBox  | 
  | ||
  | IntelliWide  | 
  | |
  | 
  | 
  | |
  | Cinema  | 
  | |
  | 
  | 
  | |
  | Cinema Fill  | 
  | |
  | 
  | 
  | |
  | 
  | Clock  | |
  | 
  | 
  | |
  | HD/RGB Adjust  | Phase  | |
  | 
  | ||
  | (available only when  | Reset  | |
  | 
  | ||
  | Execute Auto Tune  | ||
  | 
  | ||
  | 
  | 
  | |
  | 
  | Auto Tune  | |
  | 
  | 
  | |
  | Image Position  | H Position  | |
  | 
  | ||
  | V Position  | ||
  | (not available on DVI input)  | ||
  | 
  | ||
  | 
  | Reset  | |
  | 
  | 
  | |
Image Option | Over Scan Adjust  | 0% to 10%  | |
  | 
  | ||
  | SDTV Adjust  | Chroma Enhance  | |
  | 
  | ||
  | (not available on DVI or  | Video On Film (on/off)  | |
  | 
  | ||
  | Film Mode  | ||
  | 
  | ||
  | 
  | 
  | |
  | Brightness Enhance  | (on/off)  | |
  | 
  | 
  | |
  | Lamp Power  | 200W or 250W  | |
  | 
  | 
  | |
  | 
  | Source, Resolution, V Frequency,  | |
  | Information   | H Frequency, Lamp Timer, firmware  | |
  | 
  | version  | |
  | 
  | 
  | |
  | Restore Factory Settings  | 
  | |
  | 
  | 
  | |
  | Language  | English, French, Italian, German or  | |
  | Spanish  | ||
  | 
  | ||
  | 
  | 
  | |
  | Picture Configuration  | Floor Front, Ceiling Rear, Floor Rear  | |
  | or Ceiling Front  | ||
  | 
  | ||
  | 
  | 
  | |
  | OSD Timeout  | 5 secs., 15 secs. or 60 secs.  | |
  | 
  | 
  | |
  | OSD Transparent  | (on/off)  | |
  | 
  | 
  | |
  | Source Detect  | Auto or Manual  | |
Installation | 
  | 
  | |
Auto Power Off  | (on/off)  | ||
  | Blue Enable  | (on/off)  | |
  | 
  | 
  | |
  | OSD Position  | Top Left, Bottom Left, Top Right or  | |
  | Bottom Right  | ||
  | 
  | ||
  | 
  | 
  | |
  | 
  | V Keystone  | |
  | Keystone  | 
  | |
  | H Keystone  | ||
  | 
  | 
  | |
  | 
  | Reset  | |
  | 
  | 
  | |
  | Fan High Speed Mode  | (on/off)  | |
  | 
  | 
  | 
Figure 4-4.  Vision 10/12 OSD Menu Structure
ISF Setting
Brightness  | 
  | |
Contrast  | 
  | |
  | 
  | |
Color  | (not available on DVI or   | |
  | inputs)  | |
Tint  | ||
  | 
  | |
Sharpness  | 1, 2, 3, 4, 5  | |
  | 
  | |
Gamma  | 1.0, 1.5, 1.8, 2.0, 2.2, 2.35, 2.5, 2.8  | |
  | 
  | |
Color Temp  | Native, 5,000K, 5,500K, ... 10,000K  | |
  | 
  | |
Picture Setting  | Custom 1, ISF Day, ISF Night  | |
  | 
  | |
White Balance  | R/G/B Gain  | |
  | ||
R/G/B Offset  | ||
  | ||
  | 
  | |
Save Settings  | 
  | |
  | 
  | |
Lamp Timer Reset  | 
  | |
  | 
  | |
ICC Adjust  | Standard, NTSC, HDTV, PAL  | |
Intensity, Saturation, Hue  | ||
  | ||
  | 
  | |
ISF Enable  | (on/off)  | |
  | 
  | |
Blue Enable  | (on/off)  | |
  | 
  | |
Splash Screen Timer  | 15, 20, 25, 30, ... 60 secs.  | |
  | 
  | |
Noise Reduction  | 0, 1, 2, ... 8  | |
  | 
  | 
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual  | 33  |