![](/images/new-backgrounds/1143749/14374945x1.webp)
To install batteries in the remote control:
1.Press down the tab on the cover and pull the cover in the direction of the arrow.
2.Insert the included batteries. Ensure that
the polarities correctly match the and
markings inside the battery compartment.
3.Insert the lower tab of the cover into the opening, and press down the cover until it clicks in place.
3Installation
3.1
Remote Control
• When installing batteries, make sure that the battery polarities are correct. | Notes on Batteries |
•Do not mix an old battery with a new one or different types of batteries.
•If you will not use the remote control for a long time, remove the batteries to avoid damage from battery leakage.
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual | 13 |