Vidikron 40828 manual 5Maintenance and Troubleshooting, Cleaning the Projector Cleaning the Lens

•Unplug the power cord before cleaning the projector.

•Avoid using benzene or thinner, as these can damage the finish on the projector exterior.

•Do not use volatile agents, such as insecticides, on the projector.

•Do not leave rubber or plastic objects in contact with the projector for long periods as they may damage the finish of the projector.

•Wipe off dirt gently with a soft flannel cloth.

•For hard-to-remove dirt, soak a cloth in a neutral detergent diluted with water, wring the cloth well and then wipe the projector.

•Strong cleaning detergents may discolor, warp or damage the coating on the projector. Make sure to test on a small, inconspicuous area on the projector before using.

•Use a commercially available blower or lens cleaning paper (for glasses and camera lenses) for cleaning the lens. Do not use any liquid cleaning agents, as they may wear the coating film on the surface of the lens.

•The surface of the lens is easily damaged. Do not scrape or hit the lens.

5Maintenance and Troubleshooting

5.1

Cleaning the Projector

5.2

Cleaning the Lens

Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 49