Vidikron Vision 110 operation manual Serial Commands and Responses, Command Description Response

Serial Communications

Table 6-1lists the serial commands supported by the Vision 110 and the responses it sends back to the control system or PC.

Table 6-1. Serial Commands and Responses

Command		Description	Response
off	Turns projector off		Powering Down
on	Turns projector on		Powering Up
			Gennum Init
			Complete
rev	Display system firmware version information:		(see description)
	> rev
	* Vidikron Gennum Scaler Board *
	* Rev 0.31 (T18) 08 Jun 2007 *
	File Name:	Vidikron_Gennum.ncd
	Created:	21 Dec 2006 - 10:42:40
	Device:	XC3S100EVQ100

Input Selection Commands

SSRC 0 SSRC 1 SSRC 2 SSRC 3 SSRC 4 SSRC 5 SSRC 6 SSRC 7 SSRC 8 SSRC 9

Selects the Composite video input

Selects the S-Video input

Selects the Component RCA (HD1) input

Selects the Component BNC (HD2) input

Selects the Component PC (HD3) input

Selects the RGB RCA (HD1) input

Selects the RGB BNC (HD2) input

Selects the RGB PC (HD3) input

Selects the HDMI 1 input

Selects the HDMI 2 input

Composite

S-Video

Component RCA

Component BNC

Component PC

RGB RCA

RGB BNC

RGB PC

HDMI 1

HDMI 2

Aspect Ratio Commands

SAR 0 SAR 1 SAR 2 SAR 3 SAR 4 SAR 5

Selects the 16:9 aspect ratio

Selects the 4:3 aspect ratio

Selects the Letterbox aspect ratio

Selects the IntelliWide aspect ratio

Selects the Cinema aspect ratio

Selects the IntelliWide 2.35 aspect ratio

16:9

4:3 Letterbox IWide Cinema IntelliWide 2.35

64 Vidikron Vision Model 110 Installation/Operation Manual