Vidikron Vision 110 operation manual Primary Lens Adjustments, Focus, Zoom

Installation

3.10

Primary Lens Adjustments

To access the motorized lens controls, use the FOCUS, ZOOM and LENS buttons on the Vision 110 remote control unit (described on page 12).

Alternatively, select Display Device from the Service Menu. Select Configure, then Lens from the Display Device menu. The Lens menu gives you a great deal of control over the picture size, position and focus:

Focus ➤	To focus the projected image, use the cursor buttons to highlight “In” or “Out.” Then, press
	and hold the ENTER button on the remote control.
Zoom ➤	To make the picture smaller (zoom out), use the cursor buttons to highlight the minus sign
	(-). Then, press and hold the ENTER button on the remote control.
	To enlarge the picture (zoom in), use the cursor buttons to highlight the plus sign (+). Then,
	press and hold the ENTER button on the remote control.
Vertical and Horizontal Lens ➤	To change the projected image position, use the cursor buttons to highlight “Left,” “Right,”
Shift	“Up” or “Down” in the Lens menu. Then, press and hold the ENTER button to shift the image
	in that direction.

38 Vidikron Vision Model 110 Installation/Operation Manual