Motorola 45101, T2-2500 manual Http Menus, Upgrading the System Image, Line Quality

Page 15

System Administration

HTTP Menus

System Menu

Interface Menu

Advanced Menu

Monitor Menu

All configuration items related to setting up the system and management access. For example; IP address, SNMP, image upgrade

Ethernet and DSL port configuration

VLAN, IGMP, advanced configurations

Quick access to all port statistics; line quality, etc

Color coded Port Monitor:

Green - Ethernet Port or DSL Port is operating normally and within tolerance

Gray - Ethernet Port is enabled, but disconnected.

Yellow - Indicates an alert condition.

Red – Indicates a warning or alert condition. When applied to the Line Status, Red indicates the line is enabled, but the WallPlate is disconnected.

Black – Port is disabled

Upgrading the System Image

MT2 stores one active and one alternate boot image.

The WallPlate software image is included with the mT2 system image. At bootup, the image is checked for current version and any required changes. If the WallPlate image requires a reload (as during a system image upgrade), the time to upload all 25 WallPlates is approximately 20 minutes. During the upgrade time, the WallPlates will not be available for network activity. Currently, there are no WallPlate upgrades planned for current releases of mT2 software.

System image can be upgrade using FTP or TFTP. Commands used are:

Using FTP: system image load ftp://username:password@ipaddress/path/t2-app.img

Using TFTP: system image load tftp://ipaddress/path/t2-app.img

Instructions to obtain and upgrade the system image are found in the release notes of each software image.

Line Quality

mT2 includes Forward Error Correction in the VDSL frames. Bit errors that are not corrected are counted and reported as a Line Quality measurement. Bit errors are averaged over 1 second of time. An SNMP trap will be sent to the SNMP trap recipient when the threshold is crossed. The line quality status will change in the webUI and the Command Line Interface. There are two thresholds that will be set:

Maximum threshold – the line quality status will change to Fair when the errors increase beyond the maximum threshold

Motorola, Inc.

549453-001-00-a

Page 15 of 51

 

 

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Aka mT2a EthernetXD Page Regulatory Statements Model Number45125 M2 WallPlate MT2a SwitchWaste Electrical and Electronic Equipment Weee Commands and Syntax Quality of Service QoS Show Commands Commands and SyntaxCommand Hierarchy Administrative CommandsInterface Range Command DescriptionCommand Completion Style ConventionsHardware Model Numbers and DescriptionModel Number Switch Front Panel Connections Switch Rear Panel ConnectionsMounting Options M4a 4 port WallPlate M4a 4 port Service UnitWallPlate M2a 2 port WallPlateAccess Methods System AdministrationManagement Access CLI Configuration Script filesFile dir Configuration Files using the webUISystem Menu Interface Menu Advanced Menu Monitor Menu Http MenusUpgrading the System Image Line QualityView System Configuration and Status Commit modeSummary Startup Running Reset to Default Configuration Other Configuration HelpSystem config mode automanualmode Ip access-list config 1 deny http Access Control Lists ACLsRadius network authenticated login Other mounting options WallPlate InstallationInstallation Guidelines Mounting options for existing telco boxAttach cover to the bracket Installation 1 Install over 70mm x 114mm wall plateInstall bracket over existing wall plate Install RJ11 line cableRemove and discard cover over existing wall plate Variance from Country to CountryAssemble the m2 WallPlate Installation 3 External mounting tabsRemove the cover to service the WallPlate Connect RJ11 cableReview the cross-connects Installation StepsInstall mT2 switch in phone room MDF or IDF Install cross connectsConfigure mT2 EthernetXD Switch Components required to purchase In-Room InstallationTools Required Components provided with the m2a WallPlateStep Enable line power Enable line powerFinish the installation Determine which port is being installedTagged Untagged Vlan Specification802.1Q VLANs Vlan terminologyTag-based Vlan Mode Port-based Vlan Mode Vlan commands in mT2Vlan General webUI Web UI configurationSet Vlan Ingress Rules Tag-based Vlan webUICreate/Delete VLANs Set Vlan Egress RulesPort-based Vlan webUI QoS commands and concepts Quality of Service QoSNetwork qos interface queue interface-id mode mode Dynamic packet classification 802.1P bitQueue Packet transmission CommandsQoS Example Packet ClassificationPrivacy and QoS in this network Tutorial 1 Simple Hotel configurationThird party network configuration Vlan TutorialsThis network Tutorial 2 Mixed Mode Vlan configuration with QoSEnable and create VLANs, Enable QoS VLAN-Ids used in this configuration Tutorial 3 Per port 802.1Q VLANsPort Convert this tutorial to a real-world configuration Enable VLANs, configure PVIDsSwitch Eth1 Eth2 PortEth1 Eth2 Port Motorola, Inc 549453-001-00-a Optional configuration on the cascaded switch Enable VLANs, configure Vlan modesLine Status Watts Reference Line CurrentRJ21 Line Connectors Appendix a Pin-out AssignmentsRS-232 console port Fast Ethernet WallPlate ports Gigabit Ethernet portsAppendix B Hardware Specifications MT2 SwitchM2 WallPlate Page M2a WallPlate Important Safety Instructions mT2a SwitchAppendix C Compliance FCC Part 15A

45101, T2-2500 specifications

The Motorola T2-2500,45101 is a versatile and robust two-way radio that exemplifies the advanced communication technologies of its time. Designed for both professional and industrial use, this device stands out due to its durability and functionality, making it a popular choice among a range of users, from security personnel to event coordinators.

One of the main features of the T2-2500 is its powerful audio output, ensuring clear and audible communication even in noisy environments. This is particularly vital for users who rely on efficient communication to ensure safety and coordination in demanding situations. The radio incorporates advanced noise-cancellation technology which minimizes background interference, enhancing speech clarity.

The device operates on multiple channels, allowing users to select from various frequencies. This feature provides flexibility in communication, particularly in crowded areas where multiple teams might be communicating simultaneously. The T2-2500's channel scanning capability also enables users to monitor active channels quickly, promoting immediate responsiveness.

Battery life is a significant characteristic of the T2-2500, which boasts a long-lasting rechargeable battery. Users can rely on the radio throughout long shifts without the need for frequent recharging. Furthermore, the power-saving mode helps extend battery life even further, ensuring that communication remains uninterrupted.

The construction of the T2-2500 is designed to withstand the rigors of everyday use. Its rugged exterior is resistant to shocks, dust, and moisture, making it suitable for outdoor and challenging work environments. The device is also compliant with IP standards, ensuring it meets safety and performance requirements in adverse conditions.

Another noteworthy technology integrated into the T2-2500 is the ability to connect to compatible accessories. This includes earpieces for discreet communication and external microphones for hands-free operation. The adaptability of the device enhances its usability across different fields.

In summary, the Motorola T2-2500,45101 is not just a two-way radio; it represents a blend of technological advancement, user-friendly features, and rugged durability. Its powerful audio capabilities, long battery life, adaptability, and resilience make it an essential tool for anyone needing reliable communication in various professional settings. Whether for security, event management, or industrial applications, the T2-2500 stands out as a dependable communication solution.
Top Page Image Contents