Motorola T2-2500, 45101 manual MT2a Switch, M2 WallPlate

Page 4

IMPORTANT SAFETY INSTRUCTIONS

mT2a Switch

CAUTION: For installation only in a Restricted Access Location by trained service personnel.

CAUTION: Equipment must be connected to an earthed mains socket-outlet.

CAUTION: To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.

CAUTION: The power supply cord plug serves as the main disconnect for the product. The socket-outlet shall be installed near the product and be readily accessible.

CAUTION: Voltages present which are above TNV-3 (POTS) limits. A cover must be installed over the punch down blocks with a HV (High Voltage) warning label (supplied).

The maximum operating ambient temperature is 50 degrees Celcius.

When installing the Switch in an equipment rack, consider the following potential hazards:

Elevated Operating Ambient Temperature – If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than the room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the manufacturer’s maximum rated ambient temperature (Tmra).

Reduced Air Flow – Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised.

Mechanical Loading – Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.

Circuit Overloading – Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

Reliable Earthing – Reliable earthing of rack-mounted equipment should be maintained.

Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g., use of power strips).

m2 WallPlate

CAUTION: Use only power supplies listed in the user manual

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1.Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

2.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

3.Do not use the telephone to report a gas leak in the vicinity of the leak.

SAVE THESE INSTRUCTIONS

Motorola, Inc.

549453-001-00-a

Page 4 of 51

 

 

 

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Aka mT2a EthernetXD Page Regulatory Statements Model Number45125 MT2a Switch M2 WallPlateWaste Electrical and Electronic Equipment Weee Commands and Syntax Quality of Service QoS Commands and Syntax Command HierarchyAdministrative Commands Show CommandsCommand Description Command CompletionStyle Conventions Interface RangeModel Numbers and Description HardwareModel Number Switch Rear Panel Connections Switch Front Panel ConnectionsMounting Options M4a 4 port Service Unit WallPlateM2a 2 port WallPlate M4a 4 port WallPlateSystem Administration Management AccessCLI Configuration Script files Access MethodsConfiguration Files using the webUI File dirHttp Menus Upgrading the System ImageLine Quality System Menu Interface Menu Advanced Menu Monitor MenuCommit mode View System Configuration and StatusSummary Startup Running Other Configuration Help Reset to Default ConfigurationSystem config mode automanualmode Access Control Lists ACLs Ip access-list config 1 deny httpRadius network authenticated login WallPlate Installation Installation GuidelinesMounting options for existing telco box Other mounting optionsInstallation 1 Install over 70mm x 114mm wall plate Install bracket over existing wall plateInstall RJ11 line cable Attach cover to the bracketVariance from Country to Country Remove and discard cover over existing wall plateInstallation 3 External mounting tabs Remove the cover to service the WallPlateConnect RJ11 cable Assemble the m2 WallPlateInstallation Steps Install mT2 switch in phone room MDF or IDFInstall cross connects Review the cross-connectsConfigure mT2 EthernetXD Switch In-Room Installation Tools RequiredComponents provided with the m2a WallPlate Components required to purchaseStep Enable line power Finish the installationDetermine which port is being installed Enable line powerVlan Specification 802.1Q VLANsVlan terminology Tagged UntaggedVlan commands in mT2 Tag-based Vlan Mode Port-based Vlan ModeWeb UI configuration Vlan General webUITag-based Vlan webUI Create/Delete VLANsSet Vlan Egress Rules Set Vlan Ingress RulesPort-based Vlan webUI Quality of Service QoS QoS commands and conceptsNetwork qos interface queue interface-id mode mode 802.1P bit Dynamic packet classificationQueue Commands QoS ExamplePacket Classification Packet transmissionTutorial 1 Simple Hotel configuration Third party network configurationVlan Tutorials Privacy and QoS in this networkTutorial 2 Mixed Mode Vlan configuration with QoS This networkEnable and create VLANs, Enable QoS Tutorial 3 Per port 802.1Q VLANs VLAN-Ids used in this configurationPort Enable VLANs, configure PVIDs Convert this tutorial to a real-world configurationEth1 Eth2 Port SwitchEth1 Eth2 Port Motorola, Inc 549453-001-00-a Enable VLANs, configure Vlan modes Optional configuration on the cascaded switchLine Status Line Current Watts ReferenceAppendix a Pin-out Assignments RJ21 Line ConnectorsRS-232 console port Gigabit Ethernet ports Fast Ethernet WallPlate portsMT2 Switch Appendix B Hardware SpecificationsM2 WallPlate Page Important Safety Instructions mT2a Switch Appendix C ComplianceFCC Part 15A M2a WallPlate

45101, T2-2500 specifications

The Motorola T2-2500,45101 is a versatile and robust two-way radio that exemplifies the advanced communication technologies of its time. Designed for both professional and industrial use, this device stands out due to its durability and functionality, making it a popular choice among a range of users, from security personnel to event coordinators.

One of the main features of the T2-2500 is its powerful audio output, ensuring clear and audible communication even in noisy environments. This is particularly vital for users who rely on efficient communication to ensure safety and coordination in demanding situations. The radio incorporates advanced noise-cancellation technology which minimizes background interference, enhancing speech clarity.

The device operates on multiple channels, allowing users to select from various frequencies. This feature provides flexibility in communication, particularly in crowded areas where multiple teams might be communicating simultaneously. The T2-2500's channel scanning capability also enables users to monitor active channels quickly, promoting immediate responsiveness.

Battery life is a significant characteristic of the T2-2500, which boasts a long-lasting rechargeable battery. Users can rely on the radio throughout long shifts without the need for frequent recharging. Furthermore, the power-saving mode helps extend battery life even further, ensuring that communication remains uninterrupted.

The construction of the T2-2500 is designed to withstand the rigors of everyday use. Its rugged exterior is resistant to shocks, dust, and moisture, making it suitable for outdoor and challenging work environments. The device is also compliant with IP standards, ensuring it meets safety and performance requirements in adverse conditions.

Another noteworthy technology integrated into the T2-2500 is the ability to connect to compatible accessories. This includes earpieces for discreet communication and external microphones for hands-free operation. The adaptability of the device enhances its usability across different fields.

In summary, the Motorola T2-2500,45101 is not just a two-way radio; it represents a blend of technological advancement, user-friendly features, and rugged durability. Its powerful audio capabilities, long battery life, adaptability, and resilience make it an essential tool for anyone needing reliable communication in various professional settings. Whether for security, event management, or industrial applications, the T2-2500 stands out as a dependable communication solution.
Top Page Image Contents