Motorola 45101 Appendix C Compliance, FCC Part 15A, Important Safety Instructions mT2a Switch

Page 51

Appendix C

Appendix C: Compliance

FCC Part 15A

This device complies with part 15 of the FCC Rules. Operation is subject to two conditions:

(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT SAFETY INSTRUCTIONS mT2a Switch

CAUTION: For installation only in a Restricted Access Location by trained service personnel.

CAUTION: Equipment must be connected to an earthed mains socket-outlet.

CAUTION – To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.

CAUTION: The power supply cord plug serves as the main disconnect for the product. The socket-outlet shall be installed near the product and be readily accessible.

CAUTION: Voltages present which are above TNV-3 (POTS) limits. A cover must be installed over the punch down blocks with a HV (High Voltage) warning label (supplied).

The maximum operating ambient temperature is 50 degrees Celsius.

When installing the mT2a Switch in an equipment rack, consider the following potential hazards:

Elevated Operating Ambient Temperature – If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than the room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the manufacturer’s maximum rated ambient temperature (Tmra).

Reduced Air Flow – Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised.

Mechanical Loading – Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.

Circuit Overloading – Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

Reliable Earthing – Reliable earthing of rack-mounted equipment should be maintained.

Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g., use of power strips).

m2a WallPlate

CAUTION: Use only power supplies listed in the user manual

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1.Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

2.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

3.Do not use the telephone to report a gas leak in the vicinity of the leak.

SAVE THESE INSTRUCTIONS

Motorola, Inc.

549453-001-00-a

Page 51 of 51

 

 

 

Page 50 Page 51
Image 51
Page 50 Page 51
Contents Aka mT2a EthernetXD Page Regulatory Statements Model Number45125 M2 WallPlate MT2a SwitchWaste Electrical and Electronic Equipment Weee Commands and Syntax Quality of Service QoS Show Commands Commands and SyntaxCommand Hierarchy Administrative CommandsInterface Range Command DescriptionCommand Completion Style ConventionsHardware Model Numbers and DescriptionModel Number Switch Front Panel Connections Switch Rear Panel ConnectionsMounting Options M4a 4 port WallPlate M4a 4 port Service UnitWallPlate M2a 2 port WallPlateAccess Methods System AdministrationManagement Access CLI Configuration Script filesFile dir Configuration Files using the webUISystem Menu Interface Menu Advanced Menu Monitor Menu Http MenusUpgrading the System Image Line QualityView System Configuration and Status Commit modeSummary Startup Running Reset to Default Configuration Other Configuration HelpSystem config mode automanualmode Ip access-list config 1 deny http Access Control Lists ACLsRadius network authenticated login Other mounting options WallPlate InstallationInstallation Guidelines Mounting options for existing telco boxAttach cover to the bracket Installation 1 Install over 70mm x 114mm wall plateInstall bracket over existing wall plate Install RJ11 line cableRemove and discard cover over existing wall plate Variance from Country to CountryAssemble the m2 WallPlate Installation 3 External mounting tabsRemove the cover to service the WallPlate Connect RJ11 cableReview the cross-connects Installation StepsInstall mT2 switch in phone room MDF or IDF Install cross connectsConfigure mT2 EthernetXD Switch Components required to purchase In-Room InstallationTools Required Components provided with the m2a WallPlateStep Enable line power Enable line powerFinish the installation Determine which port is being installedTagged Untagged Vlan Specification802.1Q VLANs Vlan terminologyTag-based Vlan Mode Port-based Vlan Mode Vlan commands in mT2Vlan General webUI Web UI configurationSet Vlan Ingress Rules Tag-based Vlan webUICreate/Delete VLANs Set Vlan Egress RulesPort-based Vlan webUI QoS commands and concepts Quality of Service QoSNetwork qos interface queue interface-id mode mode Dynamic packet classification 802.1P bitQueue Packet transmission CommandsQoS Example Packet ClassificationPrivacy and QoS in this network Tutorial 1 Simple Hotel configurationThird party network configuration Vlan TutorialsThis network Tutorial 2 Mixed Mode Vlan configuration with QoSEnable and create VLANs, Enable QoS VLAN-Ids used in this configuration Tutorial 3 Per port 802.1Q VLANsPort Convert this tutorial to a real-world configuration Enable VLANs, configure PVIDsSwitch Eth1 Eth2 PortEth1 Eth2 Port Motorola, Inc 549453-001-00-a Optional configuration on the cascaded switch Enable VLANs, configure Vlan modesLine Status Watts Reference Line CurrentRJ21 Line Connectors Appendix a Pin-out AssignmentsRS-232 console port Fast Ethernet WallPlate ports Gigabit Ethernet portsAppendix B Hardware Specifications MT2 SwitchM2 WallPlate Page M2a WallPlate Important Safety Instructions mT2a SwitchAppendix C Compliance FCC Part 15A

45101, T2-2500 specifications

The Motorola T2-2500,45101 is a versatile and robust two-way radio that exemplifies the advanced communication technologies of its time. Designed for both professional and industrial use, this device stands out due to its durability and functionality, making it a popular choice among a range of users, from security personnel to event coordinators.

One of the main features of the T2-2500 is its powerful audio output, ensuring clear and audible communication even in noisy environments. This is particularly vital for users who rely on efficient communication to ensure safety and coordination in demanding situations. The radio incorporates advanced noise-cancellation technology which minimizes background interference, enhancing speech clarity.

The device operates on multiple channels, allowing users to select from various frequencies. This feature provides flexibility in communication, particularly in crowded areas where multiple teams might be communicating simultaneously. The T2-2500's channel scanning capability also enables users to monitor active channels quickly, promoting immediate responsiveness.

Battery life is a significant characteristic of the T2-2500, which boasts a long-lasting rechargeable battery. Users can rely on the radio throughout long shifts without the need for frequent recharging. Furthermore, the power-saving mode helps extend battery life even further, ensuring that communication remains uninterrupted.

The construction of the T2-2500 is designed to withstand the rigors of everyday use. Its rugged exterior is resistant to shocks, dust, and moisture, making it suitable for outdoor and challenging work environments. The device is also compliant with IP standards, ensuring it meets safety and performance requirements in adverse conditions.

Another noteworthy technology integrated into the T2-2500 is the ability to connect to compatible accessories. This includes earpieces for discreet communication and external microphones for hands-free operation. The adaptability of the device enhances its usability across different fields.

In summary, the Motorola T2-2500,45101 is not just a two-way radio; it represents a blend of technological advancement, user-friendly features, and rugged durability. Its powerful audio capabilities, long battery life, adaptability, and resilience make it an essential tool for anyone needing reliable communication in various professional settings. Whether for security, event management, or industrial applications, the T2-2500 stands out as a dependable communication solution.
Top Page Image Contents