wF6 Set:
When you press [F6] a submenu appears that allows you to configure the OSD settings. To change a setting, use the Up and Down Arrow Keys or mouse to move the highlight bar to it, then press [Enter] or Double Click the left mouse button.
Selecting Port ID Display Duration, Port ID Display Position, Port ID Display Mode, and Scan Duration brings up submenus of their own with choices for you to select. Move the Highlight Bar to the choice you want, then press [Enter] or Double Click the left mouse button. An icon appears before the choice to indicate that it is the currently selected one.
The settings are explained in the table below:
| Setting | Function |
| ||
|
| Determines how long a Port ID is displayed for. There are |
| ||
| PORT DISPLAY | two choices: 3 Seconds - which displays the Port ID for 3 |
| ||
| DURATION | seconds after a port change has taken place; and Always - | |||
|
| which displays the Port ID at all times. |
| ||
|
|
|
|
|
|
| PORT DISPLAY | Selects how the Port ID is displayed: the Port Number plus |
| ||
| the Name (PN + NAME); the Port Number alone (PN); or |
| |||
| MODE |
| |||
| the Name alone (NAME). |
| |||
|
|
| |||
|
|
|
|
|
|
|
| Allows you to position where the Port ID appears on the |
| ||
| PORT DISPLAY | screen. Use the Arrow Keys, Pg Up, Pg Dn, Home, End, |
| ||
| and 5 (on the numeric keypad with Num Lock off), to |
| |||
| POSITION |
| |||
| position the Port ID display, then press [Enter] to lock the |
| |||
|
|
| |||
|
| position and return to the Set submenu. |
| ||
|
|
|
|
|
|
|
| Determines how long the display dwells on each port as it |
| ||
| SCAN DURATION | cycles through the selected ports in Quick View Scan Mode. |
| ||
|
| The options are: 3, 5, 10, 15, 20, 30, 40, and 60 seconds. |
| ||
|
|
|
|
|
|
|
| Clears all Port Names from the Name List. You are asked to |
| ||
|
| confirm before the procedure goes on. While the names are |
| ||
| CLEAR NAME LIST | being cleared, a message appears on the display to indicate |
| ||
|
| so. After the names have been cleared, another message |
| ||
|
| appears to indicate that the procedure completed successfully | |||
|
|
|
|
|
|
|
| Clears all settings from memory, and returns the unit to the |
| ||
|
| factory defaults. You are asked to confirm before the |
| ||
| RESTORE DEFAULT | procedure goes on. While the settings are being cleared, a |
| ||
| VALUES | message appears on the display to indicate so. After the |
| ||
|
| settings have been cleared, another message appears to |
| ||
|
| indicate that the procedure completed successfully. |
| ||
|
| ||||
19 | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|