Viewing Basic Chassis Information | OmniSwitch 6600 Series Chassis and Hardware Components |
|
|
|
|
Slot and Component Information
To view basic slot position and component information, enter the show module command at the CLI prompt. This command displays the following information:
•Current slot position
•Alcatel part number
•Serial number
•Hardware revision level
•Manufacture date(s)
•Model name, also referred to as chassis type For example:
Slot | Serial # | HW |
| Mfg | Model Name | |||
Rev | Date | |||||||
+ |
|
| ||||||
2313283p |
| 210 | FEB | 05 2106€ OS6648 | ||||
2313283p |
| 210 | FEB | 05 2106€ OS6648 |
The Slot column lists both the main PCB (CMM) and 10/100 Ethernet bay (NI), along with the switch’s current slot position.
For complete descriptions of the command output, refer to the OmniSwitch CLI Reference Guide.
Stacked Configurations. You can use the show module command to display information for all switches in a stack, or for a specified switch only. When the show module syntax is entered with no specified slot number, information for all switches displays. When a slot position is specified in the command line (e.g., 3), information displays for the corresponding switch only. For detailed information on stacked OS6600 series switches, refer to Chapter 3, “Managing OmniSwitch 6600 Series Stacks.”
page | OmniSwitch 6600 Series Hardware Users Guide April 2004 |