Analog Devices AD9883A manual Digital Outputs, Power Supply, Dynamic Performance

									AD9883A
		Test		AD9883AKST-110			AD9883AKST-140
Parameter	Temp	Level	Min	Typ	Max	Min	Typ	Max		Unit
DIGITAL OUTPUTS
Output Voltage, High (VOH)	Full	VI	VD – 0.1			VD – 0.1				V
Output Voltage, Low (VOL)	Full	VI			0.1			0.1		V
Duty Cycle DATACK	Full	IV	45	50	55	45	50	55		%
Output Coding				Binary			Binary
POWER SUPPLY
VD Supply Voltage	Full	IV	3.0	3.3	3.6	3.15	3.3	3.6		V
VDD Supply Voltage	Full	IV	2.2	3.3	3.6	2.2	3.3	3.6		V
PVD Supply Voltage	Full	IV	3.0	3.3	3.6	3.0	3.3	3.6		V
ID Supply Current (VD)	25°C	V		132			180			mA
IDD Supply Current (VDD)2	25°C	V		19			26			mA
IPVD Supply Current (PVD)	25°C	V		8			11			mA
Total Power Dissipation	Full	VI		525	650		650	800		mW
Power-Down Supply Current	Full	VI		5	10		5	10		mA
Power-Down Dissipation	Full	VI		16.5	33		16.5	33		mW
DYNAMIC PERFORMANCE	25°C
Analog Bandwidth, Full Power		V		300			300			MHz
Transient Response	25°C	V		2			2			ns
Overvoltage Recovery Time	25°C	V		1.5			1.5			ns
Signal-to-Noise Ratio (SNR)	25°C	V		44			43			dB
(Without Harmonics)	Full	V		43			42			dB
fIN = 40.7 MHz
Crosstalk	Full	V		55			55			dBc
THERMAL CHARACTERISTICS
θJC Junction-to-Case										°C/W
Thermal Resistance		V		16			16
θJA Junction-to-Ambient										°C/W
Thermal Resistance		V		35			35

NOTES

1VCO Range = 10, Charge Pump Current = 110, PLL Divider = 1693. 2DATACK Load = 15 pF, Data Load = 5 pF.

Specifications subject to change without notice.

REV. 0 –3–