AMX NXI manual Xchm

Programming

IR/Serial Send_Commands (Cont.)

XCHM	Syntax:
Changes the IR output pat-	SEND_COMMAND <DEV>,'XCH-<Mode>'
tern for the XCH command.	Variable:
	Mode = 0-4
	Example:
	SEND_COMMAND IR_1,'XCH 3'
	Sets the IR_1 device's extended channel command to mode 3.
	Mode 0 Example (default): [x] [x] <x> <enter>
	SEND_COMMAND IR_1, 'XCH 3'
	Transmits the IR code as 3-enter.
	SEND_COMMAND IR_1, 'XCH 34'
	Transmits the IR code as 3-4-enter.
	SEND_COMMAND IR_1, 'XCH 343'
	Transmits the IR code as 3-4-3-enter.
	Mode 1 Example: <x> <x> <x> <enter>
	SEND_COMMAND IR_1, 'XCH 3'
	Transmits the IR code as 0-0-3-enter.
	SEND_COMMAND IR_1, 'XCH 34'
	Transmits the IR code as 0-3-4-enter.
	SEND_COMMAND IR_1, 'XCH 343'
	Transmits the IR code as 3-4-3-enter.
	Mode 2 Example: <x> <x> <x>
	SEND_COMMAND IR_1, 'XCH 3'
	Transmits the IR code as 0-0-3.
	SEND_COMMAND IR_1, 'XCH 34'
	Transmits the IR code as 0-3-4.
	SEND_COMMAND IR_1, 'XCH 343'
	Transmits the IR code as 3-4-3.
	Mode 3 Example: [[100][100]…] <x> <x>
	SEND_COMMAND IR_1, 'XCH 3'
	Transmits the IR code as 0-3.
	SEND_COMMAND IR_1, 'XCH 34'
	Transmits the IR code as 3-4.
	SEND_COMMAND IR_1, 'XCH 343'
	Transmits the IR code as 100-100-100-4-3.
	Mode 4:
	Mode 4 sends the same sequences as the CH command. Only use Mode 4
	with channels 0-199.
XCH	Syntax:
Transmits IR code in the for-	SEND_COMMAND <DEV>,'XCH <Channel>'
mat set with the XCHM mode	Variable:
command.	Channel = 0-999

20 NXI NetLinx Integrated Controller