AMX NXI manual Program Info, Pulse, Reboot DPS, Release Dhcp, Sendcommand, Sendstring, SET Date

		Programming
	Program Port Commands (Cont.)
	PROGRAM INFO	Displays the NetLinx program's name residing in the Master Card.
	PULSE	Pulses a channel on a device on and off. The device can be on any sys-
		tem the master you are connected to can reach. You can specify the
		device number, port, and system, or the name of the device that is defined
		in the DEFINE_DEVICE section of the program.
	REBOOT <D:P:S>	Reboots the Master Card or specified device.
	RELEASE DHCP	Releases the DHCP setting for the Master Card.
	SEND_COMMAND	Sends a command to a device. The device can be on any system the
		master you are connected to can reach. You can specify the device num-
		ber, port, and system, or the name of the device that is defined in the
		DEFINE_DEVICE section of the NetLinx Program. The data of the string
		is entered with NetLinx string syntax.
	SEND_STRING	Sends a string to a device. The device can be on any system the master
		you are connected to can reach. You can specify the device number, port,
		and system, or the name of the device defined in the DEFINE_DEVICE
		section of the NetLinx Program. The data of the string is entered with
		NetLinx string syntax.
	SET DATE	Prompts you to enter the new date for the Master Card.
		When the date is set on the Master Card, the new date will be reflected on
		all devices in the system that have clocks (i.e. touch panels). By the same
		token, if you set the date on any system device, the new date will be
		reflected on the system’s Master, and all connected devices.
		This will not update clocks on devices connected to another Master (in
		Master-to-Master systems).
	SET DNS <D:P:S>	Prompts you to enter a Domain Name, DNS IP #1, DNS IP #2, and DNS
		IP #3. Then, you enter Y (yes) to approve/store the information in the
		Master Card. Entering N (no) cancels the operation.
	SET IP <D:P:S>	Prompts you to enter a Host Name, Type (DHCP or Fixed), IP address,
		Subnet Mask, and Gateway IP address. Enter Y (yes) to approve/store
		the information in the Master Card. Entering N (no) cancels the operation.
	SET TIME	Prompts you to enter the new time for the Master Card.
		When the time is set on the Master Card, the new time will be reflected on
		all devices in the system that have clocks (i.e. touch panels). By the same
		token, if you set the time on any system device, the new time will be
		reflected on the system’s Master, and all connected devices.
		This will not update clocks on devices connected to another Master (in
		Master-to-Master systems)
	SET URL <D:P:S>	Prompts you to enter the URL address and port number. Enter Y (yes) to
		approve/store the new addresses in the Master Card. Entering N (no) can-
		cels the operation.
	SHOW DEVICE <D:P:S>	Displays a list of all devices present on the bus.
	SHOW LOG	Displays the log of messages stored in the Master's memory. The Master
		logs all internal messages and keeps the most recent messages. The log
		contains:
		• Entries starting with first specified or most recent.
		• Date, Day, and Time message was logged.
		• Which object originated the message.
		• The text of the message:
		SHOW LOG [start] [end]
		SHOW LOG ALL
		• If start is not entered, the most recent will be first.
		• If end is not entered, the last 20 messages will be shown.
		• If ALL is entered, all stored messages will be shown, starting with the
		most recent.
NXI NetLinx Integrated Controller		9