Installation
Installing the Hardware
Step 4: Connect GPIB Cable and Power Cords
NOTE
The power module and Gateway do not have power switches. Connecting the standard AC power cord to the power source (wall outlet) activates both units. The power module automatically adapts to the correct AC voltage range for your power source.
nConnect the GPIB cable from the GPIB instrument(s) to the GPIB connector on the back panel of the Gateway.
nConnect the DC power cord attached to the power module (AC/DC Adapter) to the power input on the back panel of the Gateway, as shown.
nConnect the standard AC power cord to AC IN on the power module and to a power outlet (wall outlet), as shown.
Connecting the Power Module
30 | Chapter 2 |