Agilent Technologies E2050-90003 manual Using the Telnet Utility, Accessing the Telnet Utility

Administration

Using the Telnet Utility

Using the Telnet Utility

This section explains how to access and exit the Telnet utility. It also summarizes various Telnet commands you can use to administer the

E2050 LAN/GPIB Gateway. The section contents are:

nAccessing the Telnet Utility

nExiting the Telnet Utility

nSummary of Telnet Comands

Accessing the Telnet Utility

If you need to use Telnet commands, first use this procedure to access the Telnet utility:

1If you are on an HP-UX or Windows 2000/NT client computer system, login. Also, if you are using a Windows 95/98/Me or a Windows 2000/NT client computer system, do the following:

n From the Windows 95/98/Me task bar at the bottom of the screen, select Start Programs MS-DOS Prompt. The MS-DOS window opens.

nFrom the Windows 2000/NT Program Manager, select Main. Then select MS-DOS Prompt. The MS-DOS window opens.

2If you know the IP address and hostname of the Gateway, do the following, where IP_address is the IP address of the E2050 LAN/GPIB Gateway. hostname is the hostname (Internet domain name) of the E2050 LAN/GPIB Gateway.

n If you are using an HP-UX client system, at the HP-UX system prompt, type: telnet IP_address (or) hostname Return.

n If you are using aWindows 95/98/Me/2000/NT client system, at the > prompt in the MS-DOS window, type: telnet IP_address (or) hostname Enter

Chapter 4 65