D-Link DKVM-IP1 manual Soft Keyboard

Page 28

Brightness Controls the brightness of the picture

Contrast Controls the contrast of the picture

Clock Defines the horizontal frequency for a video line and depends on the video mode. Different video card types may require different values here. The default settings in conjuction with the auto adjustment procedure should be adequate for all common configurations. If the picture quality is still bad after auto adjustment you may try to change this setting together with the sampling phase to achieve a better quality.

Phase Defines the phase for video sampling, used to control the display quality together with the setting for sampling clock.

Horizontal Position Use the left and right buttons to move the picture in horizontal direction while this option is selected.

Vertical Position Use the left and right buttons to move the picture in vertical direction while this option is selected.

Reset this Mode Reset mode specific settings to the factory-made defaults.

Reset all Modes Reset all settings to the factory-made defaults.

Save changes Save changes permanently

Undo Changes Restore last settings

• Soft Keyboard

Figure 5-12. Soft Keyboard

Opens up the Menu for the Soft-Keyboard.

Show

Pops up the Soft-Keyboard. The Soft-Keyboard is necessary in case your host system runs a completely different language and country mapping than your administration machine.

Mapping

Used for choosing the according language and country mapping of the Soft-Keyboard.

25

Image 28
Contents Link DKVM-IP1 Port KVM Switch Over IP Manual Contents Menu Options DKVM-IP1 switch hardware installation InstallationVideo modes Initial IP configuration Web interfaceRemote Console Top part of the Remote ConsoleWhen the server is up and running When the server is deadFeatures Package contentsTechnical specifications Model No DKVM-IP1 1port KVM Switch Over IPSystem requirement DescriptionVGA Cable Cable diagrams PS/2 CableUSB 2.0 Cable Operation Overview Connecting DKVM-IP1 switch to the host systemStep Connect the monitor to the DKVM-IP1 switch console side Option Ethernet connectionPage Initial configuration via Dhcp server Initial ConfigurationDKVM-IP1 switch Setup Tool Authentication Initial configuration via serial consoleIP auto configuration Keyboard, Mouse and Video configurationDKVM-IP1 switch keyboard settings IP addressRemote Mouse Settings Host system mouse settingsAuto mouse speed and mouse synchronization Fast SyncWindows XP Mouse Settings Single and Double Mouse ModeRecommended Mouse Settings Special Mouse DriverPrerequisites TelnetLogin into the DKVM-IP1 switch and logout Internet Explorer displaying the encryption key lengthNavigation MainLogout from the DKVM-IP1 switch Remote Console General descriptionMain Window Remote Console Control BarExclusive Access Remote Console Options MenuMouse Handling ScalingLocal Cursor Video Settings Remote Console Options MenuCursorSoft Keyboard 12. Soft KeyboardHotkeys Local KeyboardEncoding Remote Console Status Line 15. Encoding17. Status line transfer rate Remote KVM Console Telnet ConsoleHelp ClsQuit VersionUpload a Floppy Image Use Image on Windows Share SambaSelecting CD ROM Select Sharing to open the configuration dialog Creating an Image Floppy Images CD ROM/ISO ImagesDd if=/dev/cdrom of=/tmp/cdrom.image Driver Installation Drive redirection17. KVM Vision Viewer Setup step Create a New Device 17. Create a new DeviceDrive Redirection Settings 18. New DeviceOptions Change Password UsersSettings User Console14. User Console Settings Part 15. User Console Settings Part 17. Keyboard and Mouse Settings Keyboard/MousePage Video Network19. Network Settings Part 19. Network Settings Part Dynamic DNS 20. Dynamic DNSPage Security 22. Device Security23. Certificate Settings Certificate24. SSL Certificate Upload Serial Port 25. Serial PortPage Date And Time Event LogPage Page Device Status Board SummaryUpdate Firmware Reset FunctionsEven log Page Unit Reset 35 Unit ResetTroubleshooting Certificates CE CertificatePin Assignments Key Codes F12 Printscreen Scroll Lock Break Insert Home Delete Video Modes Rack mount kit installation diagram