D-Link DKVM-IP1 manual Options

Page 43

¾Click Ok, the new device icon will be changed as below,

Figure 5-21. Drive Redirection finished

Warning

1.Drive Redirection is only possible with Windows 2000 and the latter version.

2.The Drive Redirection works on a low SCSI level and the SCSI protocol cannot recognize partitions; therefore the whole drive selected will be shared instead of any particular partition.

3.While connecting to a legacy KVM switch, please select PS/2 mouse for Keyboard/Mouse setting from webpage. Otherwise you will be not be able to use Hot-key.

6.2.4Options

Figure 6-5. Seleting Options

Figure 6-5. USB mass storage option

Set this option to disable the mass storage emulation (and hide the virtual drive) if no image file is currently loaded. If unset, and no file image will be found it may happen that the host

40

Image 43
Contents Link DKVM-IP1 Port KVM Switch Over IP Manual Contents Menu Options DKVM-IP1 switch hardware installation InstallationVideo modes Web interface Initial IP configurationTop part of the Remote Console Remote ConsoleWhen the server is dead When the server is up and runningPackage contents FeaturesDescription Technical specifications Model NoDKVM-IP1 1port KVM Switch Over IP System requirementVGA Cable Cable diagrams PS/2 CableUSB 2.0 Cable Operation Overview Connecting DKVM-IP1 switch to the host systemStep Connect the monitor to the DKVM-IP1 switch console side Ethernet connection OptionPage Initial configuration via Dhcp server Initial ConfigurationDKVM-IP1 switch Setup Tool Initial configuration via serial console AuthenticationIP address IP auto configurationKeyboard, Mouse and Video configuration DKVM-IP1 switch keyboard settingsFast Sync Remote Mouse SettingsHost system mouse settings Auto mouse speed and mouse synchronizationSpecial Mouse Driver Windows XP Mouse SettingsSingle and Double Mouse Mode Recommended Mouse SettingsTelnet PrerequisitesInternet Explorer displaying the encryption key length Login into the DKVM-IP1 switch and logoutMain NavigationRemote Console General description Logout from the DKVM-IP1 switchRemote Console Control Bar Main WindowRemote Console Options Menu Exclusive AccessMouse Handling ScalingLocal Cursor Remote Console Options MenuCursor Video Settings12. Soft Keyboard Soft KeyboardHotkeys Local KeyboardEncoding 15. Encoding Remote Console Status Line17. Status line transfer rate Telnet Console Remote KVM ConsoleVersion HelpCls QuitUse Image on Windows Share Samba Upload a Floppy ImageSelecting CD ROM Select Sharing to open the configuration dialog CD ROM/ISO Images Creating an Image Floppy ImagesDd if=/dev/cdrom of=/tmp/cdrom.image Drive redirection Driver Installation17. KVM Vision Viewer Setup step 17. Create a new Device Create a New Device18. New Device Drive Redirection SettingsOptions Users Change PasswordUser Console Settings14. User Console Settings Part 15. User Console Settings Part Keyboard/Mouse 17. Keyboard and Mouse SettingsPage Network Video19. Network Settings Part 19. Network Settings Part 20. Dynamic DNS Dynamic DNSPage 22. Device Security SecurityCertificate 23. Certificate Settings24. SSL Certificate Upload 25. Serial Port Serial PortPage Event Log Date And TimePage Page Board Summary Device StatusUpdate Firmware Reset FunctionsEven log Page 35 Unit Reset Unit ResetTroubleshooting CE Certificate CertificatesPin Assignments Key Codes F12 Printscreen Scroll Lock Break Insert Home Delete Video Modes Rack mount kit installation diagram