D-Link DKVM-IP1 manual Help, Cls, Quit, Version, Terminal

Page 33

Replace the IP address by the one that is actually assigned to the DKVM-IP1 switch. This will prompt for username and password in order to log into the device. The credentials that need to be entered for authentication are identical to those of the web interface. That means, the user management of the Telnet interface is entirely controlled with the according functions of the web interface.

Once you have successfully logged into the DKVM-IP1 switch a command line will be presented and you can enter according management commands.

In general, the Telnet interface supports two operation modes: the command line mode and the terminal mode. The command line mode is used to control or display some parameters. In terminal mode the pass-through access to serial port 1 is activated (if the serial settings were made accordingly). All inputs are redirected to the device on serial port 1 and its answers are displayed on the Telnet interface.

The following list shows the according command mode command syntax and their usage.

help

Displays the list of possible commands

cls

Clears the screen

quit

Exits the current session and disconnects from the client

version

Displays the release information

terminal

Starts the terminal passthrough mode for serial port 1. The key sequence esc exit switches back to the command mode. The command has an optional parameter (1 or 2) to select the desired serial port for passthrough access.

30

Image 33
Contents Link DKVM-IP1 Port KVM Switch Over IP Manual Contents Menu Options Installation DKVM-IP1 switch hardware installationVideo modes Web interface Initial IP configurationTop part of the Remote Console Remote ConsoleWhen the server is dead When the server is up and runningPackage contents FeaturesDKVM-IP1 1port KVM Switch Over IP Technical specifications Model NoSystem requirement DescriptionCable diagrams PS/2 Cable VGA CableUSB 2.0 Cable Connecting DKVM-IP1 switch to the host system Operation OverviewStep Connect the monitor to the DKVM-IP1 switch console side Ethernet connection OptionPage Initial Configuration Initial configuration via Dhcp serverDKVM-IP1 switch Setup Tool Initial configuration via serial console AuthenticationKeyboard, Mouse and Video configuration IP auto configurationDKVM-IP1 switch keyboard settings IP addressHost system mouse settings Remote Mouse SettingsAuto mouse speed and mouse synchronization Fast SyncSingle and Double Mouse Mode Windows XP Mouse SettingsRecommended Mouse Settings Special Mouse DriverTelnet PrerequisitesInternet Explorer displaying the encryption key length Login into the DKVM-IP1 switch and logoutMain NavigationRemote Console General description Logout from the DKVM-IP1 switchRemote Console Control Bar Main WindowRemote Console Options Menu Exclusive AccessScaling Mouse HandlingLocal Cursor Remote Console Options MenuCursor Video Settings12. Soft Keyboard Soft KeyboardLocal Keyboard HotkeysEncoding 15. Encoding Remote Console Status Line17. Status line transfer rate Telnet Console Remote KVM ConsoleCls HelpQuit VersionUse Image on Windows Share Samba Upload a Floppy ImageSelecting CD ROM Select Sharing to open the configuration dialog CD ROM/ISO Images Creating an Image Floppy ImagesDd if=/dev/cdrom of=/tmp/cdrom.image Drive redirection Driver Installation17. KVM Vision Viewer Setup step 17. Create a new Device Create a New Device18. New Device Drive Redirection SettingsOptions Users Change PasswordUser Console Settings14. User Console Settings Part 15. User Console Settings Part Keyboard/Mouse 17. Keyboard and Mouse SettingsPage Network Video19. Network Settings Part 19. Network Settings Part 20. Dynamic DNS Dynamic DNSPage 22. Device Security SecurityCertificate 23. Certificate Settings24. SSL Certificate Upload 25. Serial Port Serial PortPage Event Log Date And TimePage Page Board Summary Device StatusReset Functions Update FirmwareEven log Page 35 Unit Reset Unit ResetTroubleshooting CE Certificate CertificatesPin Assignments Key Codes F12 Printscreen Scroll Lock Break Insert Home Delete Video Modes Rack mount kit installation diagram