Fadergil -- Set Fader Gain of Line Inputs as a Group

ERROR#092

ERROR#093

This error indicates an EF Bus ID conflict. See the Vortex user manual for information on valid device IDs.

This error indicates an EF Bus reference conflict. This error occurs when more than one Vortex is placing its AEC reference on the bus. Use the BUSREF command to

remove the extra reference(s) in order to resolve the conflict.

This command is a boolean command. See Section 6.1 for more information on this type of command.

This command is saved to global non-volatile memory and is not part of a preset. Its value is saved each time it is changed. It will retain its value after power-down. Since this command writes to non- volatile memory, there will be a delay before an acknowledgment is returned.

Example	Description	Status Message
S01ERROR1	Enable error messages.	S01ERROR1
S01ERROR0 Disable error messages mode. S01ERROR0
S01ERROR2 Toggle error message mode.		S01ERRORx , where x is 0 or 1 depending on the
S01ERROR2 Toggle error message mode.		current state of error mode.
		current state of error mode.

S01ERROR? Query the state of error mode. S01ERRORx , where x is 0 or 1 depending on the current state of error mode.

8.47.FADERGIL -- Set Fader Gain of Line Inputs as a Group

This command sets the fader gains of all the line inputs simultaneously. This is different from using a wildcard, * with the FADERI command because that command sets all the mic and line inputs

together, while the FADERGIL sets only the line inputs.

This command will generate acknowledgements from each of the line inputs separately.

This command is an integer command. See Section 6.2 for more information on this type of command. The minimum and maximum values for this command are -100 and 20, respectively.

This command is saved to non-volatile memory only as part of a preset. The state of this command will be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.