S01VTXMODIB0

S01VTXMODIB2

S01VTXMODIA?

S01VTXMODI*1 S01VTXMODI*0

S01VTXMODI*10

S01VTXMODI*2

S01VTXMODI*?

Disable VTX mode on input B.

Toggle status VTX mode on input B.

Query status of VTX mode on input A.

Enable VTX mode on inputs A-B.

Disable VTX mode on inputs A-B.

Enable VTX mode on input A and disable VTX mode on input B.

Toggle status of VTX mode on inputs A-B.

Query status of VTX mode on inputs A-B.

S01VTXMODIB0

S01VTXMODIBx , where x is either 0 or 1 depending on the current status of VTX mode on input B.

S01VTXMODIAx , where x is either 0 or 1 depending on the current status of VTX mode on input A.

S01VTXMODI*11

S01VTXMODI*00

S01VTXMODI*10

S01VTXMODI*ab , where each of the letters (a, b, etc.) is either 0 or 1 depending of the current status VTX mode on the corresponding input. If this command was sent after the example above, then the status message would be S01VTXMODI*01 .

S01VTXMODI*ab , where each of the letters (a, b, etc.) is either 0 or 1 depending of the current status VTX mode on the corresponding input. If this command was sent after the example above, then the status message would be S01VTXMODI*01 .

8.155. VTXMODO -- Enable VTX Mode on Specified Inputs

Vortex devices can be connected to a Polycom VTX 1000 in order to use the wideband capabilities of that device. When connecting to a VTX 1000, special proccessing is done on the Vortex in order to guarantee compatibility with the VTX 1000. This command enables processing for the VTX 1000 on the specified line output or outputs.

This command is a channel boolean command. See Section 6.3 and Section 6.1 for more information on this type of command.

This command is saved to non-volatile memory only as part of a preset. The state of this command will be restored after power-up only if a preset is saved and that preset is set to be the power-on preset.

Example

S01VTXMODO11 S01VTXMODOA0

S01VTXMODO12

Description

Enable VTX mode on output 1.

Disable VTX mode on output A.

Toggle status VTX mode on output 1.

Status Message

S01VTXMODO11

S01VTXMODOA0

S01VTXMODO1x , where x is either 0 or 1 depending on the current status of VTX mode on output 1.

Page 121 Page 123
Page 122
Image 122
Polycom RS-232 manual Vtxmodo -- Enable VTX Mode on Specified Inputs, Example
Page 121 Page 123

RS-232 specifications

Polycom RS-232 is a key interface utilized in various communication and audiovisual systems, enabling effective integration between different devices. This technology employs a standard serial communication protocol that allows for robust control and communication, particularly in environments that require sophisticated audiovisual setups.

One of the main features of Polycom RS-232 is its ability to facilitate point-to-point communication over distances of up to 50 feet without the need for a repeater. This long-range connectivity is essential in large conference rooms and auditoriums where devices are often spread out over considerable distances. The serial connection is often more reliable than wireless options, which can be susceptible to interference.

Another notable characteristic is its versatile compatibility with a range of devices, including cameras, projectors, and interface panels. This allows users to control multiple devices from a single point, streamlining the operation of complex setups. The straightforward nature of RS-232 commands simplifies integration, which is a significant benefit for both installers and end-users.

Polycom RS-232 also supports various baud rates, giving users the flexibility to optimize communication speed based on their requirements. This adaptability ensures that users can achieve the desired performance, whether they are managing basic functions like power and volume control or more complex commands for switching video sources or adjusting settings.

The technology also features error-checking capabilities, which contribute to its reliability in communication. This reduces the likelihood of issues during operations, ensuring that commands are correctly received and executed. Additionally, its structured protocol aids in diagnosing and troubleshooting, making it easier to manage any issues that arise.

With its robust nature and proven reliability, Polycom RS-232 remains a pivotal technology in the realm of audiovisual communications. Its combination of long-range capabilities, compatibility, flexibility, and reliability makes it an essential tool for enhancing the efficiency of modern communication environments. As technology continues to evolve, the importance of dependable interfaces like Polycom RS-232 cannot be overstated, ensuring seamless integration and operation of sophisticated communication systems. Whether used in educational institutions, corporate environments, or event venues, Polycom RS-232 guarantees a streamlined experience in device management and control.
Top Page Image Contents